Yellow Screw Neck PP Caps on Sale

The transparent glass threaded sample bottle is 2mL, 12x32mm, and has an advanced sample bottle sealing system. The screw vial can prevent the septum from being pressed in, and can provide a stop point for the bottle cap to prevent over-tightening or over-tightening, and it can provide the best and consistent seal every time.

Aijiren polypropylene screw micro vials can be used in most standard gas and liquid chromatography autosamplers. These lightweight, economical vials are made from durable polypropylene which has good chemical resistance.

Autosampler vials are available in a variety of sizes, with 2 mL vials being the most common size. During the injection process, the autosampler needle pierces the cap and extracts the desired amount of analyte from the vial. There are different types of vials for chromatography applications.

Although most laboratories have switched to 9 mm screw thread vials for a wider opening while still being autosampler compatible, some labs use 8-425 vials for storing solvents. The standard opening 8-425 vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.

Screw thread closures?N9?(9mm)?2ml vials and closures?are?universally suitable?on most autosamplers,?convenient?in handling and available in a broad?selection of different cap colors and septum materials. They?fulfill all requirements with regard to?tightness?and?analytical?purity?for GC as well as for HPLC. Due to the relatively thin?septa penetration is safe and easy.

HPLC autosampler vials  are generally categorized by vial diameter, vial height, and thread finish. Clear glass and amber glass have similar inert properties. Amber glass is used to protect sensitive samples from UV light. Markings on the vials provide sample identification information.

Aijiren offer innovative high recovery vials for comprehensive collection, automated handling and storage, with the subsequent maximum retrieval of high value samples. 1.5ml 9mm high Recovery Vials Reduce Residual Product Waste by 99%.

PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

Caps with solid PE liners offer good chemical resistance and low moisture vapor transmission rate and is great for nail polish remover and higher concentration acids & alkalis. Good for non-oil products filled at room temperature. Because this lining system is paperless, your samples will not be contaminated with fiber or paper particles from the closure. Available in Phenolic caps.

These vials are manufactured with high precision and quality control standards to ensure consistent performance. They undergo rigorous processes to eliminate defects and ensure batch-to-batch uniformity. The use of high-quality materials and advanced manufacturing techniques guarantees reliable and reproducible results in HPLC analysis.

The aijiren chromatography sample vial is made of borosilicate glass and meets ASTM TYPE I ClassA and USP TYPE I standards.
There are four types: colorless and amber vial, handwriting area and no handwriting area.

While most liquid chromatography autosamplers use 12 x 32 mm vials, the most common HPLC vials are 9 mm screw vials. 9 mm screw vials have openings that are large enough for easy pipetting, but the necks (and closures) are still compatible with most autosamplers in use today.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

The 9mm screw cap is made from high-quality material, providing excellent durability and chemical resistance. Its precise threading allows for easy and efficient sealing, ensuring a reliable closure for HPLC vials. The septa, made of a specialized material, offers optimal inertness and compatibility with a wide range of samples, ensuring accurate and reproducible results in HPLC analysis.

9mm standard 2ml short threaded sample vial(2ml autosampler vial), 2ml, 12×32mm, neck diameter 9mm; red PTFE/white silicone vial gasket, blue perforated polypropylene (PP) vial cap, sample vial has Transparent, amber, transparent with scale writing, and amber with scale writing are available for selection, suitable for various models of autosamplers such as Aijiren, Waters, Varian and Shimadzu.

9mm screw thread caps, septa, and vials are designed especially for use with Aijiren’s and other rotating or robotic are samplers
2ml 12*32mm clear borosilicate glass vial,with a write-in patch; high quality polypropylene caps, ptfe / silicone septa can be pre-slit to easy needle penetration

With its 9mm screw thread design and capacity of 1.5mL, this vial makes for easy handling and integration into autosamplers. Ideal for applications requiring limited quantities. The vial comes equipped with various finishes and closure options, such as screw caps and snap caps, so researchers can select their ideal choice according to their unique research needs.

Chromatography autosampler vials are widely used in chromatography, chemistry, medical and other fields. Autosampler vials are generally made of hydrolytic glass or borosilicate, with various specifications. Different vial mouth designs meet different actual needs.

1.5ml 9mm Screw Neck Vial for automatic samplers is made of low metal type 33 and 51 COE borate glass to prevent sample instability or leaching. By selecting the cap and pad, we provide the best sealing solution for the sample.

9mm screw autosampler vial is widely used in laboratory chromatographyanalysis. Aijiren as one of largest chromatography consumable supplier, supplies 9mm screw HPLC vial in wholesale price. This 9mm screw vial package can reduce screw vial mouth touch to prevent contamination of sample. At the same time, the package box can be used as a vial rock, it is save the cost. Welcome to inquiry us about chromatography consumable.

The PP cap will puncture with far less force than needed to puncture a PTFE/Silicone septa, thus minimizing instrument wear and tear as well as downtime. The septa are not resealable and are intended for single use.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

9mm thread screw neck vial, 32×11.6mm, transparent / amber PP, with graduation line, slightly concave shaped bottom
Preassembled cap and septafor 9mm thread screw PP cap, blue, centrel hole, PTFE/Silicone 9x1mm

Amber Borosilicate Glass
ND9mm Screw Neck Vial
11.6*32mm
With Writing Spot
9mm Blue Short Screw PP Cap
with 6mm Centre Hole
Pre-slit / non-slit PTFE Silicone Septa
Septa Size: 9*1mm

9mm standard 2ml short threaded sample vial(2ml autosampler vial), 2ml, 12×32mm, neck diameter 9mm; red PTFE/white silicone vial gasket, blue perforated polypropylene (PP) vial cap