Wholesale 10-425 2ml Screw top sample vials for lab Use

Caps are made of high quality polypropylene, Caps have the profile of a crimp or snap closure for compatibility with robotic autosamplers, Pre-assembled septa reduces the chance of contamination during sample preparation, while saving sample preparation time in the lab.

Vials are manufactured in clear type 1 class A or amber type 1 class B borosicate glass. 10-425 screw fasteners and 10mm septum must be used. See Assembly Caps and Septum Limited volume micro-insert for wide opening 10-425 vial.

We provide the protection of PTFE and the resealing ability of silicone with our septa and seals to fit our autosampler crimp top vials. This seal includes a two sided PTFE septa with silicone in the center.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

Chromatography vial is a glass vial used by automatic samplers and headspace samplers such as liquid chromatography, gas chromatography, mass spectrometry, etc. for chromatographic automatic sampling.  10-425 Screw Glass vial for autosampler instrument is made of borosilicate glass.

Aijiren is committed to ensuring the safety and integrity of the analyzed samples. Aijiren provides an innovative 10mm 2ml Hplc screw Vials to ensure that all experimental data during the separation process are consistent. 10-425 Screw Vials are the best choice for the latest autosamplers. The standard opening vial is made of borosilicate glass and has a maximum filling volume of 2ml.

Aijiren 10mm wide opening screw vial 2mL, 12x32mm 10mm wide opening screw vial and insert. 10-425 thread finish. The vial has a calibrated write patch that is useful for identifying samples. The neck opening is wide and easy to fill.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Approximately 40% larger than a normal small neck
The increase of the target area makes sample preparation easier
Large diameter is specially designed for automatic samplers such as Waters
The large-mouth design reduces the probability of bending and damage of the sample needle during the needle sampling process

Brand: Aijiren
Mouthful capacity: 2.0ml
Material: made of grade 1 hydrolyzed glass
Color: brown
Whether OEM processing: Yes
Packing: 100 pcs/box, packed in PP plastic pallet box

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Amber glass vials are available in 2ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

HPLC Vial 10-425 1.5ml Screw Vial. The wide open vial has a larger target area to make it easier to prepare the sample and to reduce the possibility of the needle bending or bending during sampling. Vials are manufactured in clear type 1 class A or amber type 1 class B borosicate glass. 10-425 screw fasteners and 10mm septum must be used.

The wide open vial expands the target area to facilitate sample preparation and reduce the possibility of needle bends or breaks during sampling.
Viars are manufactured in clear, type 1 class A or amber, type 1 class B borosicate glass
10-425 screw fasteners and 10mm septum must be used.

Clear Glass Screw Thread Vials are 2mL, 12x32mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Clear Glass Vial Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal.

Chromatography sample vial is a glass vial used by automatic samplers and headspace samplers such as liquid chromatography, gas chromatography, mass spectrometry, etc. for chromatographic automatic sampling.  10-425 Screw Glass vial For autosampler instrument is made of borosilicate glass.

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling
13-425 screw thread caps, septa, and vials are designed for specific use with the Shimadzu and Waters WISP 48-Position Autosampler

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

Aijiren focus on improving the safety and integrity of our samples. Aijiren provide innovative 10mm thread caps and 10mm 2ml Hplc Screw Vials to ensure consistent productivity in all separation processes. These vials are the best choice for the latest autosampler. Standard open screw vials are made of borosilicate glass with a maximum filling volume of 2ml.

10-425 Wide-opening vials provide an increased target area for easier sample preparation and to reduce the chance of bent or broken needles during sampling,10-425 Vials are manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B borosilicate glass.

Aijiren specializes in the production of Autosampler Vials, has its own production plant, and has purchased a large number of production equipment for assembly line production. At present, Aijiren has become the largest manufacturer of chromatographic consumables in southern China. Among them, Autosampler Vials is Aijiren’s most important product and the most customers. Products needed.