Thread Chromatography vial with 9mm Ptfe Silicone Pre-slit Septa

10mm sample bottles are widely used in the pretreatment of samples analyzed by gas chromatography and liquid chromatography. With the development of testing technology and the improvement of testing standards, the quality requirements for sample bottles have also increased. The 10mm large opening of Aiji can effectively prevent the risk of injection needle deviation.

The automatic vial is made of high quality raw materials. It has high temperature resistance and corrosion resistance. The septum of the autosample vials is made of high quality materials to ensure proper function and is widely used in multiple injection or longer injection cycle designs as well as gas and liquid chromatographs.  

Snap vial is manufactured from Type 1 borosalicate glass (Class A, 33 extended borosicate glass) and is available from transparent or scarlet, or polypropylene. Snap vial accepts both aluminum snap seal and polyethylene snap cap. Ideal for short-term storage. De-activation and MS authentication are also available.

 9mm Screw conical micro-vial for lab chromatography experiment, the micro-vial size is 11.6x32mm.  High quality glass vial for HPLC/GC analysis. 0.3 ml clear or amber  glass micro insert fixed in 2ml glass vial.

Red PTFE / white silicon separator + black cap without holes, 15x45mm vial for 4ml screw top vial has 13-425 GPI thread, can hold up to 4ml samples. Use a 13 x 425 cap with a septum when using it as a sample vial, or a diffusion cap for a cleaning vial. Sealed screw seals allow these vials to also be used as storage vials.

The automatic vial is made of high quality raw materials. It has high temperature resistance and corrosion resistance. The septum of the autosample vials is made of high quality materials to ensure proper functioning and is widely used in multiple injection or longer injection cycle designs as well as gas and liquid chromatographs.

HPLC Vial Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. When used in conjunction with autosampler vials, micro inserts allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Clear Glass Vial Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal.

Aijiren 2ml 11mm Snap Ring HPLC Vial is made of transparent type A type 1 or amber type B type 1 type B borosilicate glass. Amber glass can effectively block ultraviolet rays and protect sensitive samples from the volatilization caused by ultraviolet rays. Aijiren 2ml 11mm Snap Ring HPLC Vial has a standard scale and writing area for easy filling and identification.

Caps are made of high-quality polypropylene to meet accurate manufacturing tolerances and backed in a managed manufacturing environment. The color of the cap is only black. The septum uses only the highest quality materials to ensure proper function and can be easily penetrated by pre-slits.

2ml 9mm Screw Top Autosampler Vials are cleaned and packaged in a certified Class 10,000 clean room according to a designed process, developed to eliminate chromatographic errors associated with vials. For Chromatography vials, 2ml 9mm Screw Top Autosampler Vials is the most commonly vial in laboratories. 2ml 9mm Screw Top Autosampler Vials are more leak-tight and easy for the experimenter to operate.

Aijiren 2ml snap neck has 40% lager target area which makes it much safer for the autosampler needle. Snap vials can be closed with either snap caps or crimp caps. Snap cap vials cannot be pressurized, but can be easy as push-on, pull-off by hand. A audible click ensures a secure seal has been formed and that the cap is correctly aligned. Precision-formed neck improves autosampler handling.

The Lab Use 9mm 2ml HPLC Autosampler Vial for Supply is a specialized vial designed for high-performance liquid chromatography (HPLC) applications. With a 9mm thread size, these vials ensure a secure and leak-proof seal, preventing sample contamination and maintaining sample integrity during analysis.

2ml Amber Snap Autosampler Vial is mainly used in lab chromatography analysis. This 2ml Amber Snap Autosampler Vial has some features: 1.Extremely high inertness: The inertness of the sample vial can reduce the peak variability of the analyte. 2. Consistent performance: Each batch of the sample vial has consistent performance, which saves you more time for troubleshooting and re-running samples.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Autosampler vial, also known as a sample vial or injection vial, is a small container used for storing and handling samples in automated sampling systems.These vials are designed to fit into autosamplers, which are instruments used in analytical chemistry to automatically inject samples into analytical instruments such as gas chromatographs (GC) or liquid chromatographs (LC).
Autosampler vials play a critical role in automated sample handling and injection processes. They provide a secure and convenient way to store samples, protect them from contamination, and facilitate the precise and reproducible injection of samples into analytical instruments.

1. The glass adopts high-quality borosilicate glass tube, with low free ion content, low expansion coefficient and very high chemical resistance.
2. The unique thread design can ensure the consistency of the seal.
3. Strict quality assurance provides dimensional consistency between batches.
4. It is suitable for autosampler of Aijiren, Shimadzu, Waters, CTC/Leap and other companies.

Due to the large amount of glass used in the vial neck, the snap seal vial is hard to break when the cap is removed. The neck finish of the snap seal is compatible with crimps and/or snap seals and does not require any special tools to remove the cap. These viars are recommended for short-term sample storage and non-volatile samples because seals are not as secure as crimp or thread seals.

Clear Glass Screw Thread Vials are 2mL, 12x32mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time.

The Screw Cap and Septa for 1.5ml HPLC Autosampler Vial are essential components for secure sealing and sample integrity in HPLC analysis. The screw cap ensures a tight and leak-proof closure, preventing any contamination or loss of samples. The septa, made of high-quality materials, provides excellent chemical resistance and ensures a reliable seal.

11mm Crimp Neck Conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. 2ml clear glass vial with 0.3ml intergrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical.

The 4ml 13mm Screw Thread Vials often feature clear graduated markings on the side, allowing for accurate measurement and dispensing of samples. These graduations provide researchers with a visual reference for precise volume control, minimizing errors in sample preparation and analysis.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One-piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one-time use and reduce sample preparation time as there is no cap and seal to assemble.

PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

Features of the Crimp Top Sample Vial
Rigorous quality assurance ensures consistency of dimensions between lots
Optional ceramic writing spot with fill mark
Full warranty compatibility certification with autosampler