sample vial septa

Aijiren presses Silicone and PTFE composite into the picture, and cuts them into rectangular sheets of similar size. Because PTFE is easy to curl and deform, the raw materials in the picture are all curled. Wait for it to enter the dryer to dry the moisture. Keep it level. Aijiren uses a mechanical laser to cut Septa, and guarantees the integrity and chemical nature of Septa.

Crimp Neck Closures produced by Aijiren are often used in Crimp top Headspace Vial. The production of Crimp Neck Closures is fully automated. As a factory with 20 years of production experience, Aijiren can meet the quality of Crimp Neck Closures and become a well-known manufacturer of chromatographic consumables in China.

Aijiren’s 8mm Septa is made of Silicone and PTFE raw materials. Aijiren cuts Pre-slit on Septa for the convenience of customers. The pattern is a font and a cross. The cross-shaped pre-slit septa is the best. It is convenient for the automatic injection needle to puncture. If the customer uses a blunt needle, you can consider buying a cross-type pre-slit septa.

24mm Silicone/PTFE Septa is matched with 24mm screw neck cap, suitable for 24mm screw sample storage vial. Aijiren has an exclusive production technology that can compound PTFE and Silicone without adding any adhesives, so Aijiren’s Septa is soft and not easily deformed.

13mm Screw Neck Closures are made of high-quality polypropylene. The thread shape inside the Cap can fit the automatic sample injection via very well, and it is also compatible with the automatic sampler. The 13mm Screw Neck Closures pre-assembled septum can reduce the chance of contamination during sample preparation and save time in laboratory sample preparation. Aijiren provides septa and slit septa. The normal available cap color is black, but other special colors can also be produced.

PTFE/silicone septa are most commonly used in HPLC applications, and pre-cut septa are easier to pierce with a needle. The cap color is generally black, but other special colors can also be produced accordingly. Easy to apply and easy to remove. Pre-installed caps and septa are very convenient. Aijiren 13mm Screw Closures are commonly used in 4ml Screw Top HPLC Vial. Aijiren can recommend the most suitable Closures for your HPLC Vial.

The PTFE layer of Aijiren’s 20mm PTFE Septa composite diaphragm is in contact with the reagent. It is chemically inert, resistant to acids, alkalis, temperature and adhesion. Even at high temperatures, it cannot work with concentrated acids, alkalis or strong oxidants. At the same time, the elasticity of the silicone rubber or silicone layer can ensure the sealing performance; Aijiren abides by strict production management to ensure the quality of the product. The product is clean and can be used directly without washing.

When selecting a vial septum, septum compatibility with the sample and solvent or chemical resistance are the main considerations. Except for poor sealing, others are not suitable for multiple injections or storage. For layered septa, such as PTFE/silicone, chemicals with sample/solvent, so the chemical resistance of silicone should be considered when using these septa.

The non-pre-slit septas help to reduce carryover from vial to vial because the resealing characteristics of the septum act as a squeegee to wipe solution from the outside of the needle. Typically, a non-slit septum exhibits resealing capabilities for a limited number of needle punctures but for long-term storage in the vial, using a new non-punctured septum is best practice.

Chromatography septas can be pre-slit or not and must be considered by evaluating a few factors. A pre-slit septum is an ideal choice in applications requiring 20% or more of the sample injection each time from the vial so that suction is avoided.

HPLC sample vial Septa is one of the most important part in chromatography consumable. Septa for HPLC has high temperature resistance and corrosion resistance. Quality and service in a controlled production environment is trusted by customers. The Caps are made of high quality polyproylene to exact manufacturing tolerances and lined in a controlled manufacturing environment, The color of the #HPLCvial cap can be customized according to customer needs. Aijiren’s septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration.