MCE syringe filter

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. t. In HPLC analysis and IC analysis, syringe filters can be used to filter sample solutions, which is an important step in sample pretreatment.

Aijiren disposable MCE syringe filter units are designed to provide clear filtration of aqueous and organic solutions from small volumes up to 100 mL.
MCE syringe filters are made from mixed cellulose ester (MCE) membrane and polypropylene overmolded housing.

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. Therefore, samples and solvents must be pre-filtered to remove particulate contaminants and protect the instrument.

The Sterile syringe filter produced by Aijiren is a single-use membrane-based filtration facility that is mostly used to remove particulate impurities from liquid and gas samples before analysis by HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing methods. . Correctly filtering samples in chromatographic experiments can improve the quality and consistency of analysis results and reduce instrument downtime. The sterile syringe filter adopts high-temperature aseptic processing and vacuum packaging of liquid to ensure the cleanliness of the syringe filter. It is recommended to be used once.

MCE Syringe Filter is generally used to filter neutral or partial neutral aqueous solutions, and can be used as experimental sample clarification filtration, liquid chromatography injection filtration and so on. Not suitable for filtering organic solvents and strong acid and alkali solutions. This filter is for one-time use, filtering about 10 ml at a time (specifically, there is a big difference according to the impurities of the filtered liquid), and the filter membrane cannot be disassembled. 0.45¦Ìm can remove conventional impurities and some bacteria visible to the naked eye. Generally used in conjunction with the syringe.

MCE features: relatively uniform pore size, high porosity, no media shedding, thin texture, low resistance, fast filtration rate, and minimal adsorption.
The main purpose of MCE: to filter out the particles and bacteria of liquid medicine, gas, oil, beverages, sprinkles, electronic instruments, etc., and can also be used for the detection of particles and bacteria.

The MCE membrane filter provides researchers with the lowest combined filter. Due to their extremely low binding characteristics, these filters provide higher throughput than competing products and reduce filter replacement when filtering protein solutions.

The special color contrast provided on the surface of the MCE film helps to detect particles and minimize eye strain. It is ideal for the recovery and retention of bacteria in colony counting and sterility testing, as well as water/wastewater analysis and other microbiological tests.

Features of MCE: uniform pore size, thin texture, low flow resistance, high filtration speed, low absorption, all items are quality tests for filter efficacy and housing integrity. The housing is pressure tested and can withstand pressures up to 75 psig (5.0 bar). Some filters are individually packaged aseptic packaging, certified, RNase, DNase and DNA free, and non-pyrogenic.

In the sample application of choosing the appropriate syringe filter and syringe, draw your sample into the syringe and place the filter on the syringe. If you are using a leur lock filter, make sure you have properly secured the filter into the syringe tip .Push a few drops through the filter with the syringe filter facing up and “top”. Place the filter in the overturned collection container and push the sample through the syringe filter by applying gentle positive pressure. The syringe filter to be cleared and the maximum To maximize sample throughput, remove the filter from the syringe and draw air into the syringe. Then reinstall the filter and push the plunger to force some air through the filter.

Uniform aperture,Thin texture,Low flow resistance,High filtration speed,Little absorption,All items are quality tests for filter efficacy and housing integrity. The housing is pressure tested for use with up 75 psig (5.0 bar) of pressure.

1.ISO9001 approved
2.Imported from Germany and US to ensure high quality
3.Manufactured in 100,000 class cleaning room
4.Wide range size and customized.
5.OEM service available
6.Low backfround response
7.Board membrane choice with excellent compatibility with aqueous , organic solvent or their mixtures.

Aijiren’s syringe filters and vials reduce HPLC sample preparation time and the use of consumables, and the track-etched membrane is also essential for extruding liposomes for encapsulation and targeted drugs.

Our Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housings.

Syringe filter is a quick, convenient and reliable filter tool used routinely in the laboratory.Because they don’t need to change the membrane and filter cleaning, it’s eliminating the complex and time-consuming preparation. It is widely used in the sample pre filtration, removal of particles, aseptic filtration of liquids and gases. It is the preferred method to filter small samples before loading into HPLC and GC ,and it is often used with disposable syringe.

A syringe filter (or wheel filter) is a single-use, membrane-based device used for the removal of particulate impurities from small (≤ 100 mL) liquid samples. Selected based upon the desired end application, disposable syringe filters are commonly used in labs for fast and efficient filtering, material purification, or even sterilization.

UHPLC Precolumn Filter
• Economical protection against microparticles.
• Extend UHPLC column lifetime.
• Negligible effect on column performance.
• Universal fit—easily connects directly to any brand column.
• Leak tight to 15,000 psi (1,034 bar).
• Does not contribute to system backpressure.
• Does not contribute to band broadening.

With PES syringe filter membrane mechanically strong character, it can handle high-temperature liquids, with great flow rate (better than PTFE), and low protein binding. With these features, PES syringe filters offer superior performance for use with biological samples and media culture. Workable pH range ~3-14.
Nylon: Nylon membrane filters are hydrophilic, flexible, tear-resistant, and autoclavable. They are resistant to a range of organic solvents and suitable for use with high pH samples. Nylon binds proteins. Unsuitable for acidic solutions. pH range ~3-14.
MCE (Mixed Cellulose Ester) syringe filters are an ideal choice when biological samples are involved. Mixed Cellulose is a hydrophilic membrane offering both low protein binding coefficients and exceptional flow rates.

Aijiren Tech’s syringe filters are a complete range of non-sterile disposable syringe filters for reliable sample preparation. Repeatable membrane quality and automated production processes ensure that particles are removed from each sample, extend the service life of the analytical column, and minimize damage to the inlet or valve.

The membrane materials produced by Aijiren are provided by the most famous people in the industry, and in the ISO9000 certified production process, under certified clean room conditions, the latest manufacturing technology is used to ensure high-quality and stable products to achieve the highest standards . All syringe filters are HPLC certified.

Our Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 25mm formats in virgin polypropylene housings.

The syringe filter produced by Aijiren is the preferred method for filtering small samples before being loaded into HPLC and GC, and is usually used with disposable syringes to filter out impurities in the sample to ensure that there is no quality in the test Problems and affect the experimental results.

Aijiren syringe filter is a fast, convenient and reliable filter tool, usually used in the laboratory. Since they do not require membrane replacement and filter cleaning, complicated and time-consuming preparations are eliminated. It is widely used for sample prefiltration, particle removal, aseptic filtration of liquids and gases.

Aijiren Syringe Filter is a comprehensive range of non-sterile disposable syringe filters for reliable sample pre-treatment. Reproducible membrane quality and automated manufacturing processes ensure particles are removed from all samples, extending the life of analytical columns and minimizing injection port and valve damage. The Aijiren syringe filter is available in 0.22um and 0.45um porosity, 4, 13, 25 and 30mm diameters.

The Aijiren Tech Syringe Filter is a comprehensive non-sterile disposable syringe filter for reliable sample preparation. Reproducible membrane quality and automated manufacturing processes ensure particles are removed from all samples, extending the life of analytical columns and minimizing injection port and valve damage.

Membrane materials are supplied under the industry’s best names, and ISO9000 certified manufacturing uses the latest manufacturing technology to ensure high quality and consistent products, performed to the highest standards in certified cleanroom conditions. All syringe filters are HPLC certified.

Our syringe filters are high quality, packaged and sold at fair competitive prices. They are available in most of the major membrane materials including nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF, and are available in 13mm, 17mm, 25mm and 30mm formats for virgin polypropylene housings.

Syringe filters are a fast, convenient and reliable filter tool that is routinely used in laboratories. No need to replace membranes or clean filters, which eliminates the need for complex and time-consuming preparations. Widely used in pre-sample filtration, particle removal, and aseptic filtration of liquids and gases. This method is suitable for rinsing small samples before loading into HPLC and GC, and is often used in disposable syringes.