lab

Syringe filter is a small, disposable device that is commonly used in laboratory settings to filter or clarify fluids. It is designed to be attached to the end of a syringe and acts as a barrier that removes particles and contaminants from the fluid as it is forced through the filter.
Syringe filters typically consist of a plastic housing with a membrane filter inside. The housing has a female luer lock or luer slip connection that allows it to be securely attached to the syringe. The membrane filter, which is the key component, is made of a porous material that allows the fluid to pass through while retaining particles and contaminants above a certain size.

Screw Glass Vials are small cylindrical containers made of glass that are equipped with a screw cap closure mechanism. These vials are designed to securely store and protect various substances, such as liquids or solid samples.
The screw cap closure of these vials consists of a threaded cap that can be easily twisted on and off the vial. This closure mechanism ensures a tight seal, preventing leakage or contamination of the contents. The screw cap usually has a liner or septum inside to provide additional sealing and protection.

Headspace borosilicate glass vials are specialized containers used in the pharmaceutical and scientific industries for the storage and analysis of gases or volatile substances. These vials are made from borosilicate glass, which is known for its exceptional thermal resistance and chemical inertness.
The term “headspace” refers to the space above the liquid or sample inside the vial, which contains the vapor or gas phase of the substance. In applications such as gas chromatography, where the analysis of volatile compounds is required, the headspace technique is commonly employed.

Syringe filter is a disposable device used in laboratory settings to filter small volumes of liquid samples. It is commonly utilized to remove particulate matter and microorganisms from solutions before analysis or to protect sensitive instruments from contamination.
Syringe filters consist of a plastic housing with a membrane filter at one end and a female luer lock or luer slip connection at the other end. The filter membrane is typically made of materials such as nylon, polyethersulfone (PES), polytetrafluoroethylene (PTFE), or cellulose acetate.

100ml lab glassware reagent bottle refers to a specific type of laboratory glass container designed to hold and store reagents, chemicals, or other liquids used in scientific experiments or analysis. It has a capacity of 100 milliliters, which means it can hold up to 100 milliliters of liquid.
These bottles are typically made of high-quality borosilicate glass, which is resistant to heat and chemical reactions. They often have a narrow neck and a screw cap or stopper to ensure a tight seal and prevent any leakage or contamination.
Lab glassware reagent bottles come in various sizes, ranging from small volumes like 5ml or 10ml up to larger sizes like 500ml or 1000ml. The 100ml size is commonly used when smaller quantities of reagents are needed for experiments or when space is limited.

Syringe filter is a small, disposable device used for filtering liquids or gases.It consists of a plastic housing with a membrane filter at one end and a female luer lock or luer slip connection at the other end, which allows it to be attached to a syringe or other fluid delivery system.
Syringe filters are commonly used in laboratory and research settings to remove particles, microorganisms, or other impurities from samples before analysis or further processing. The membrane filter in a syringe filter acts as a barrier, allowing only the desired components of the sample to pass through while retaining any larger particles or contaminants.
The choice of membrane material depends on the nature of the sample and the substances to be filtered.

4ml autosampler vial refers to a type of small glass or plastic container specifically designed for use in autosamplers, which are instruments used in analytical chemistry. Autosamplers are used to automatically inject samples into analytical instruments, such as gas chromatographs or liquid chromatographs, for analysis.
Autosampler vials are typically made of either glass or plastic, with glass vials being more commonly used for applications that require higher chemical resistance.
They are designed to be compatible with the specific requirements of the autosampler instrument, ensuring a secure fit and reliable sample injection.

Rubber septa, also known as rubber stoppers or closures, are commonly used in laboratories as a sealing material for vials, bottles, and other containers. A septum (plural: septa) is a thin piece of rubber or elastomeric material that is designed to provide an airtight or liquid-tight seal when inserted into the opening of a container.
Rubber septa are typically made from a variety of elastomeric materials, such as natural rubber or synthetic polymers like silicone or butyl rubber.
These materials are chosen for their flexibility, chemical resistance, and ability to form a tight seal.

2ml lab autosampler vial is a small container typically used in laboratory settings to store and transport samples for analysis.
Autosampler vials are designed to be compatible with automatic sampling systems or instruments known as autosamplers.
The capacity of a 2ml autosampler vial refers to its volume, and it can hold up to 2 milliliters (2 ml) of liquid or sample.
These vials are commonly made of glass or high-quality plastic materials such as polypropylene or polymethylpentene (PMP).
The choice of material depends on the specific application and compatibility requirements.

A syringe filter is a disposable filtration device that is attached to a syringe for the purpose of filtering or clarifying liquid samples.
It consists of a plastic housing with a membrane filter that allows for the removal of particles or contaminants from the sample as it passes through the filter.
Syringe filters are widely used in research laboratories, quality control laboratories, pharmaceutical industries, biotechnology companies, and other applications where the filtration of liquid samples is necessary.

20mm crimp-top headspace borosilicate glass vial is a specific type of vial used in headspace analysis, a technique commonly employed in gas chromatography (GC). These vials are designed to store and analyze samples for volatile compounds.
Headspace analysis involves the sampling and analysis of the vapor phase above a sample, typically done to analyze volatile compounds that can be released from solid or liquid samples.
The headspace vials are specifically designed to withstand the increased pressure and temperature conditions associated with this technique.It’s important to note that Headspace vials may also be available with other closure mechanisms, such as screw caps or magnetic caps.

4ml HPLC vial refers to a vial or container specifically designed for use in High-Performance Liquid Chromatography (HPLC) applications with a maximum capacity of 4 milliliters (4ml).
HPLC vials are used to store and contain samples that will undergo analysis using HPLC instruments.
4ml HPLC vials are specifically designed containers that hold samples during HPLC analysis.
They are an essential component in the sample preparation and injection process for accurate and reliable HPLC results.

2ml hplc borosilicate glass 3.3 vial kit refers to a collection or set of vials made from borosilicate glass with a nominal composition of 3.3. Borosilicate glass is a type of glass that is known for its exceptional thermal resistance, chemical durability, and low coefficient of thermal expansion.
In summary, borosilicate glass 3.3 vial kits offer exceptional thermal resistance, chemical durability, low thermal expansion, transparency, and compatibility with diverse applications. These properties make them a popular choice for sample storage and containment, ensuring the preservation and integrity of samples in scientific and laboratory settings.

Silver aluminum caps ND11 refer to a specific type of closure used for sealing vials or containers with an ND11 neck size. ND11 refers to the outer diameter of the vial’s opening, which is a standardized measurement in the laboratory industry.

Silver aluminum caps are commonly used in laboratory settings due to their durability, chemical resistance, and ability to provide a secure seal. Here are some key features of silver aluminum caps

9 mm PP septa are commonly used in laboratory applications, including chromatography, sample storage, and sample analysis. These septa provide a reliable and effective barrier between the sample and the environment. PP septa, or polypropylene septa, are a type of sealing material used in laboratory applications, particularly in chromatography and sample analysis. These septa are made from polypropylene, a chemically resistant and thermally stable polymer.

2 ml snap HPLC 5.0 borosilicate glass vials are a specific type of vial designed for use in high-performance liquid chromatography (HPLC) applications. These vials are characterized by their snap cap closures, which provide a convenient and secure sealing mechanism.It’s also essential to select the appropriate vial size to accommodate your sample volume and ensure compatibility with your HPLC autosampler.

2 ml clear crimp neck vial is a type of vial commonly used in laboratory settings for storing and handling liquid samples or reagents.Clean the vials thoroughly before use to avoid contamination, and use a crimping tool to apply the cap or closure securely.

Screw silicone HPLC/GC refers to a type of septum that is commonly used in chromatography applications, specifically in High-Performance Liquid Chromatography (HPLC) and Gas Chromatography (GC) systems.In chromatography, a septum is a small, flexible disk made of a resilient material that is placed in the injection port of the chromatography instrument.

0.22 um 25 mm nylon filter syringe, also known as a nylon syringe filter, is a type of syringe filter that utilizes a membrane made from nylon material. Nylon is a synthetic polymer known for its excellent chemical compatibility, high flow rates, and broad applicability in filtration processes. dis hydrophilic property allows teh membrane to wet rapidly when in contact wif water, enabling efficient filtration of aqueous samples.

0.45 um 25 mm syringe filters are commonly used in laboratory settings, particularly in analytical chemistry, to prepare samples for analysis or to clarify solutions before further processing. They are designed to effectively trap and remove particles, contaminants, or unwanted substances from the liquid being filtered. The filters are available in various pore sizes, allowing for the selection of a filter dat is appropriate for the specific application and the desired level of filtration.

13/25 mm,0.22 um syringe filter is a small, disposable filter device that is used to remove impurities or particles from a liquid sample. It consists of a plastic housing with a membrane filter at one end and a female Luer lock or slip tip at the other end, which allows it to be attached to the end of a syringe.Syringe filters are convenient, cost-effective, and widely used in laboratory applications where small volumes of liquid need to be filtered quickly and efficiently.