9mm screw cap

Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.

Aijiren’s Caps all come with Septa, and 9mm Cap is the most popular choice, because 9mm Cap with Vial are Aijiren’s hot-selling products. The screw Neck design ensures the consistency of the seal and the pattern, and the seal is good, and it is convenient for manual operation. The operation meets the needs of laboratory personnel, and the packaging of 100pcs meets the convenience of experimental use.

Aijiren can merge septa and cap, and before the merger, the machine can automatically identify the front and back of septa, silicone and PTFE surface, choose to fix the PTFE side up into the Cap, fully automated production saves a lot of manpower, Aijiren Be able to invest more talents in quality inspection and product development.

9mm Closures are formed by the combination of Cap and Septa. Screw Neck guarantees the tightness of 9mm Closures. Generally speaking, one end of PTFE faces the sample surface, because PTFE is highly inert and difficult to react with chemicals. Aijiren also supports separate orders for Cap and Septa.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

The PP cap will puncture with far less force than needed to puncture a PTFE/Silicone septa, thus minimizing instrument wear and tear as well as downtime. The septa are not resealable and are intended for single use.

Aijiren strongly recommends to use only ready-made sealing caps, whose lining matches the bottle cap completely, and has been automatically inserted under strict sanitary conditions.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Caps with solid PE liners offer good chemical resistance and low moisture vapor transmission rate and is great for nail polish remover and higher concentration acids & alkalis. Good for non-oil products filled at room temperature. Because this lining system is paperless, your samples will not be contaminated with fiber or paper particles from the closure. Available in Phenolic caps.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

Aijiren’s 9mm HPLC Vial is packaged in 2-in-1, and vial uses boxes for packaging. Customers can choose cartons and plastic boxes for packaging, 100pcs/box. The cap is packed in plastic sealed bags, 100 pcs/pack. Aijiren will use a carton for packaging on the outside, and then use plastic film to wrap the carton to prevent moisture and moisture.

The 9mm screw vial cap can have a 6mm opening for autosampler use and standard addition, or it can have a solid top for storing samples. A polypropylene cap and diaphragm are also available. These pierceable screw caps are designed for one-time use, and because there are no caps and seals to assemble, the sample preparation time is reduced.

The polypropylene screw cap with diaphragm prevents evaporation and is highly sealed. The double layer includes silicone and PTFE. The 9mm screw cap has a shorter thread, which shortens the sealing time. The silicone septum can be injected multiple times. Screw caps lined with PTFE are used for organic samples. The screw cap provides an inert air-tight seal and can be directly pierced through the sample with a syringe needle.

Aijiren’s 9mm Screw Thread Vial has a specification of 11.6*32mm. You can choose 5.0type and 7.0type, and you can also choose clear and amber colors, or you can choose with or without label area. Aijiren provides customized services. Customers can customize logo printing.

The high recovery glass vials produced by Aijiren are often used when the remaining amount of the reagents to be tested is not large or the substances to be tested are precious. The thickened bottom of the bottle reduces the possibility of sample remaining at the bottom of the bottle.

Screw-top Vials and caps are easy to use and require no special tools. The unique thread design provides a consistently secure seal, preventing evaporation. Screw Thread Vials are available in 8-425 (8mm), 9-425 (9mm), 10-425 (10mm) and 13.425 (13mm) neck finishes. But the most commonly used is 9mm hplc vial.

Clear Glass Screw Thread Vials are 2mL, 12x32mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time.

Aijiren’s 9mm Screw Cap is made of high-quality PP material, and the color can be customized according to customer needs. You can also choose whether to have a center hole. If you need to perform automatic sampling, it is recommended to use a Cap with a center hole to facilitate automatic injection needles sampling.