Screw Cap and Septa for 9mm 2ml Screw HPLC Vial

Polypropylene screw cap with septum – Polypropylene screw cap with precision fit septum provides anti-evaporation seal. Two layers include silicone and PTFE. Silicone septum for multiple injections. PTFE lining screw cap for organic samples. The screw cap provides an inert airtight seal and holes directly into the sample with a needle.

Caps with solid PE liners offer good chemical resistance and low moisture vapor transmission rate and is great for nail polish remover and higher concentration acids & alkalis. Good for non-oil products filled at room temperature. Because this lining system is paperless, your samples will not be contaminated with fiber or paper particles from the closure. Available in Phenolic caps.

PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

9mm thread screw neck vial, 32×11.6mm, transparent / amber PP, with graduation line, slightly concave shaped bottom
Preassembled cap and septafor 9mm thread screw PP cap, blue, centrel hole, PTFE/Silicone 9x1mm

9mm Closures are formed by the combination of Cap and Septa. Screw Neck guarantees the tightness of 9mm Closures. Generally speaking, one end of PTFE faces the sample surface, because PTFE is highly inert and difficult to react with chemicals. Aijiren also supports separate orders for Cap and Septa.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials.

Short Thread Caps with Septa for 9mm 1.5ml HPLC Vial often come with multiple septa options to accommodate different analytical requirements. Depending on the specific application, researchers can choose from various septa materials, such as silicone, PTFE, or bonded septa, to optimize sample compatibility and performance.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

The PP cap will puncture with far less force than needed to puncture a PTFE/Silicone septa, thus minimizing instrument wear and tear as well as downtime. The septa are not resealable and are intended for single use.

The 9mm hplc vials produced by Aijiren can be used in many places and scenarios. The GC System is just one of them. More often, the 9mm hplc vials produced by Aijiren are used in different Autosamplers. Its compatibility is a major part of its popularity. the reason. Aijiren’s 9mm hplc vials is one of the most popular products.

Aijiren is a supplier of 2ml 9mm Screw HPLC Vials. Our factory specializes in the production of vials for chromatography. We use good raw materials to make vials and sell them at a cheap price while ensuring quality.
The 2ml 9mm Screw HPLC Vials provided by Aijiren can be added with a writing area, which is convenient for customers to mark
samples during experiments and to distinguish samples. Aijiren’s 2ml 9mm Screw HPLC Vials also accept logo customization. If
the customer needs, we can print the customer’s brand logo on the vial. We provide customized services to facilitate customer needs. If you need 2ml 9mm Screw HPLC Vials or customized service, please contact us.

Vial Closure Size: 9mm
Vial Volume (Metric) 1.5mL
Volume (Metric) Working 1.3mL
Material: Glass
Color: Amber
Height (Metric) 32mm
Outside Diameter (Metric) 12mm
Residual Volume: <4μL

 9mm Screw conical micro-vial for lab chromatography experiment, the micro-vial size is 11.6x32mm.  High quality glass vial for HPLC/GC analysis. 0.3 ml clear or amber  glass micro insert fixed in 2ml glass vial.

Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.

Polypropylene caps are known for good impact strength, cost effectiveness, and pliability. They can be remelted after they are formed. Aijiren Polypropylene cap is widely used in chromatography analysis.

Aijiren polypropylene screw micro vials can be used in most standard gas and liquid chromatography autosamplers. These lightweight, economical vials are made from durable polypropylene which has good chemical resistance.

The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Glass Screw Top Autosampler Vials, the product material is of paramount importance.

These vials are a good choice for the latest autosamplers. With an emphasis on improving sample security and integrity, we offer innovative 9mm closures and 9mm screw top vials for consistent productivity across all separations.
Standard opening screwed viars are manufactured from borosicate glass and the maximum filling volume is 2 ml.

Our 9 mm Wide Mouth Vials and Closures are our recommended screw thread vials. These vials are autosampler compatible and offer a 40% larger opening than 8-425 thread vials, simplifying pipetting and other routine functions. Aijiren Tech offers 9 mm screw thread vials in clear and amber glass, as well as polymeric options and mass spec quality glass.

These caps form an exceptionally tight seal and offer a good chemical barrier. This liner molds itself around the sealing areas of the finish as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, binding and backing off. Great for everything from liquids, to soaps, to macro-invertebrates.

Suit for: 9mm Short Thread Vials
Caps Material: polypropylene
Cap Diameter: 9mm
Cap Features: 6mm Centre Hole or Closed Top
Septa Material: PTFE / Silicone
Septa Feature: Pre-slit I or X
Septa diameter: 9mm
Septa Thickness: 1mm

Aijiren’s 2ml Glass Vials can be applied in a wide range of fields. Many projects that require chromatographic analysis need to use 2ml Glass Vials, such as environmental analysis, soil analysis, pharmaceutical analysis, food analysis, etc. The aim of Aijiren is to provide high-quality chromatographic consumables for customers of chromatography.

Aijiren understands that 2ml HPLC vial are as important as chromatography columns or instruments. As a result, Aijiren 2ml HPLC sample vial are designed to meet the highest standards you can expect. So 2ml HPLC vial can be exported to 32 countries.

The 9mm 1.5ml Short Thread HPLC Vials exhibit excellent chemical compatibility, making them suitable for a wide range of sample matrices and analysis methods. They can withstand exposure to organic solvents, acids, bases, and other chemicals commonly used in HPLC analysis. This chemical resistance ensures sample integrity and reliable analysis results.