Screw Cap and Septa for 1.5ml HPLC Autosampler Vial

Transparent viale, 33-extended borosicate glass USP type I, Class A
Step-by-step write marking spot area, 0.5, 1.0, and 1.5ml
Strict quality control to ensure a consistent size of each lot of items.
Flat bottom to ensure consistent matching between the vial and the true neck 6mm of the standard glass insert.
Caps are made of high-quality polypropylene to meet accurate manufacturing tolerances
Septum is made of the highest quality materials to ensure proper functioning

Chromatographic autosampler vials are glass vials used for chromatographic autosampling in liquid chromatographs, gas chromatographs, mass spectrometers and other autosamplers and headspace samplers. Generally consists of a complete set of vial, cap and gasket. Its basic requirements are accurate volume, can withstand a certain pressure, good sealing performance, no adsorption effect on the sample.

Aijiren has been engaged in the production of 8-425 HPLC Vial with Caps for more than ten years, we have absolutely rich experience and familiar processes to produce 8-425 HPLC Vial with cap, and we can guarantee the high quality of 8-425 HPLC Vial with Cap produced by Aijiren with reasonable price.

2ml Autosampler Vials 8-425 Neck surface finish is representative of hplc vials &GC vials, vials have a screwed outer diameter of 8 mm, thread style 425, vials are available in clear and amber, threaded caps in Lab most 2ml vials are 11.6x32mm

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

The 8-425 Screw Cap with Septa for 8mm Vial offers compatibility with a wide range of laboratory applications. They are commonly used in chromatography techniques, such as High-Performance Liquid Chromatography (HPLC). These screw caps are suitable for both routine analysis and research applications, ensuring reliable and reproducible results.

8-425 2ml Autosampler Vials from Aijiren is 12*32mm,It is 40% wider than the ordinary vial opening, thus ensuring that the syringe of the autosampler can pierce the bottle smoothly without errors. 8-425 2ml autosampler vials neck Suitable for Shimadzu autosampler and other rotating or robotic arm samplers.

The screw top vial design is characterized by general ease of use, especially with autosampling systems, hence the name autosampler vial. The 1.5 ml vials are commonly referred to as 2 ml capacity vials.

These HPLC vials feature an 8-425 thread size, making them compatible with a wide range of HPLC instruments. The precise thread design allows for a tight and reliable seal, preventing any potential leakage or contamination. The vials have a clear glass construction, enabling easy visibility and inspection of the sample.

Let me introduce the material of 8-425 2ml autosampler vials, 33 Expansion borosilicate glass USP Type I Class A made of clear vial, or 51 Expansion borosilicate glass USP Type I, Class B made of Amber vial.Our glass uses neutral borosilicate and low borosilicate, but our neutral borosilicate can reach the standard of high borosilicate, and our low borosilicate can reach the standard of neutral borosilicate. We use excellent raw materials to make 8-425 2ml autosampler vials.

Autosampler vials are generally made of hydrolytic glass or borosilicate, with various specifications. 2ml Autosampler Vials 8-425 Neck surface finish is representative of hplc vials &GC vials

Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum.
8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass , And attached with a writable label for sample identification.

Autosampler vials are available in a variety of sizes, with 2 mL vials being the most common size. During the injection process, the autosampler needle pierces the cap and extracts the desired amount of analyte from the vial. There are different types of vials for chromatography applications.

Aijiren has been producing 8-425 2ml hplc glass vial for more than ten years. During this decade, Aijiren added new factories and production lines to strictly regulate production standards and processes. Continuous improvement has made Aijiren one of the largest laboratory consumable suppliers in southern China.

Compared with crimping seals, threaded vials and caps have lower evaporation, reusability, less damage to hands during operation, and no special tools are required. The 8-425 neck mouth represents a vial with a diameter of 8mm. The outer diameter of the thread of the vial is 8mm, and the thread pattern is 425.

The thread design of the 8-425 threaded sample vialcan make the septum achieve extremely strong re-tightness, so this sample vial can also be used as a storage vial, and it can also be used for autosampler. This design sample vial is mostly suitable for Shimadzu Hitachi and other Japanese enterprise instruments.

Constructed from high-quality borosilicate glass, these autosampler vials offer exceptional chemical resistance and thermal stability. The 8-425 thread finish allows for easy and efficient sealing, ensuring hassle-free sample preparation.

2ml Autosampler Vials 8-425 neck finish represents a hplc vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm. The design of Aijiren screw thread top vials is developed from Europe and the United States, and the design feature is easy to use, especially the use of an automated sample introduction system. 

We provide septa and caps to fit our autosampler crimping the top vial to provide PTFE protection and silicone resealability. The cap includes a double-sided PTFE septum with silicone in the middle.

2ml Autosampler Vials 8-425 neck finish represents a hplc vials &gc vials, the vials a diameter of 8mm over the outside of the threads and a thread style of 425, vials has clear and amber, screw cap in lab most of the 2ml vials are 12x32mm.

2mL amber glass screw top autosempla vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID viale has an opening about 40% wider than the standard opening vial. Large openings reduce the risk of the autosampler needle bending during sampling. When selecting a 2mL amber glass screw top autosan pravisal, the material of the product is the most important.

The specifications of the vials are 12 x 32 mm.
Accurate handling of bottlenecks to enable the mechanical arm to operate efficiently.
Suitable for Aijiren, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosamplers, and other rotating or robotic arm samplers.
40% larger opening than the standard narrow opening vial prevents syringe problems
The special screw design ensures a consistent seal.

Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.