Red Sterile PES Syringe Filter

The Sterile syringe filter produced by Aijiren is a single-use membrane-based filtration facility that is mostly used to remove particulate impurities from liquid and gas samples before analysis by HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing methods. . Correctly filtering samples in chromatographic experiments can improve the quality and consistency of analysis results and reduce instrument downtime. The sterile syringe filter adopts high-temperature aseptic processing and vacuum packaging of liquid to ensure the cleanliness of the syringe filter. It is recommended to be used once.

Aijiren syringe filter membrane use method introduction: before inhaling the sample, suck about 1ml of air into the syringe, so as to minimize the liquid residue, suck the sample into the syringe, invert the syringe and clear all the residues on the top Clean, connect the needle filter to the syringe, tighten it gently to ensure a good seal, filter the sample in the syringe and inject it into the sample bottle, and then follow the steps to maximize the recovery rate, remove the filter, and suck air into the syringe, Reconnect the filter head and eject all residual samples.

PES syringe filter membrane has the characteristics of high mechanical strength, it can handle high temperature liquid, and has a large flow rate (better than PTFE), and low protein binding force. With these functions, PES syringe filters can provide excellent performance for biological samples and culture media. The usable pH range is about 3-14.

Aijiren disposable MCE syringe filter units are designed to provide clear filtration of aqueous and organic solutions from small volumes up to 100 mL.
MCE syringe filters are made from mixed cellulose ester (MCE) membrane and polypropylene overmolded housing.

Selected PES syringe filters provide a cleaner sample extract by removing interfering materials and fine particles down to the rated pore size. Performing a syringe filtration step before chromatographic injection helps ensure more consistent and reliable results, and helps protect delicate instruments and extend column life.

In addition to HPLC, syringe filters have a multitude of other applications. A syringe filter adds a few minutes and a minimal expense to your testing process, but you will see a big return on your investment. Small volume venting£¬HPLC sample preparation£¬Removal of protein precipitates£¬Routine QC analysis£¬Dissolution testing.

Although Aijiren has attractive prices, the focus is still on quality. The membrane materials are provided by the most famous people in the industry, and in the ISO9000 certified production process, the latest manufacturing technology is used, and the production is carried out under the highest standard under certified clean room conditions to ensure high quality and stable products. . All syringe filters are HPLC certified.

Our Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housings.

These syringe filters feature a user-friendly design that allows for easy and efficient filtration. They are compatible with standard luer-lock syringes, providing a secure and leak-free connection. The nylon membrane has a small pore size, typically ranging from 0.2μm to 0.45μm, enabling efficient removal of contaminants while retaining the desired analytes. The filters provide high flow rates and low protein binding, making them suitable for a variety of sample types.

Elevate your lab’s filtration capabilities with our High Quality PVDF Syringe Filters, designed for uncompromising performance and reliability.

They are also very useful in the protection of vacuum pump pipelines and have the qualities of high absorption and retention capacity. Due to their advantages, these syringes can be used in laboratory situations as well as industrial applications.

Aijiren manufactures a Syringe Filter that comes in a number of different membranes, PTFE membranes are hydrophilic and inert and fit many different types of agents, the details below contain the chemicals compatible with the PTFE Syringe Filter. In addition, the article number and specific specifications of Aijiren PTFE have been clearly described. If you have any needs, please leave a comment below for inquiry.

PES (Polyethersulfone ) syringe filter is natural hydrophilic which makes is an ideal choice (highly recommended) for aqueous solutions and alcohols. It’s not necessary to treat the filter membrane surface with wetting agents.

Choice PES Syringe Filters Specifications
Membrane: HPLC certified
Maximum operating temperature: 100 ¡ãC
Housing: Medical grade, virgin polypropylene
Autoclave: Sterilize by dry heat at 121 ¡ãC for 15 minutes

Polyethersulfone (PES):?Hydrophilic, stable in low pH, have low levels of extractables, and exhibit low protein binding, making them suitable for many aqueous and organic solvents. PES membranes allow higher liquid flow than PTFE. Temperature resistant. pH range ~3-14 (sometimes quoted as 1-14).

Nylon has excellent flow characteristics, extremely low extractable level and mechanical stability, and can provide the best combination of physical parameters to meet the most stringent analysis requirements of 13mm, 25mm and 33mm diameters. Nylon’s natural hydrophilicity, high protein binding capacity and high dirt adsorption capacity are natural advantages.

Syringe filters are made of many different types of materials. Various materials, diameters, pore sizes, and sterile and non-sterile options are on our list. These syringe filters provide excellent microfiltration performance for HPLC, water treatment, environment, biotechnology, beverage, food, pharmaceutical and other related fields.

The sterile syringe filter provided by Aijiren has a cellulose acetate or PES filter membrane. A sterile membrane with a pore size of 0.2um is an ideal material for sterilization and filtration, while a pore size of 0.45¦Ìm can be used for clarification. The sterile needle filter is sterilized by gamma radiation, which avoids the toxic residue caused by other sterilization methods

Filter sterilization, that is, removing microorganisms by physical means such as screening or filter material adsorption, is a commonly used method of sterilization. The filtration method is widely used, and some materials that need to be sterilized cannot be heated, such as many vitamin solutions. In addition to being used in the production of beverages and drugs, the air is often sterilized by filtration. When we usually do microbiology experiments, the sterilized container is usually plugged with cotton at the outlet, which is actually filtering to remove microorganisms in the air, so that there is no microbial contamination in the air entering the container.

Adding a syringe filtration step before the sample injection not only helps to ensure more consistent and reliable results. It also helps protect delicate instruments and extend column life.

Designed to be compatible for the use on all common automated filtration systems, Standard syringe filters are color coded. Aijiren syringe filters are labeled for method validation and certification. All syringe filters are autoclavable (121 ¡ãC and 1.1 bar for 30 min).

The EPA VOA vials feature a secure closure mechanism to maintain sample integrity and prevent sample leakage or contamination. The vials typically come with a screw cap equipped with a septum, ensuring a tight and leak-proof seal. This closure mechanism ensures the preservation of volatile organic compounds during storage and transportation.

As an important tool for filtering reagents, the Nylon syringe filter plays a very important role, especially in chromatographic consumables. A slightly larger impurity particle in the reagent may cause clogging of the instrument.