Products

There are two types of packaging for 20mm Crimp Top Closures produced by Aijiren, one is packaged in plastic bags, the other is packaged in threaded plastic cans, and the quantity is 100 per bag/can. Aijiren is packaged in cans. Because 20mm Crimp Top Closures are easily squeezed and deformed during transportation, which affects the sealing effect in the experiment, they are packed in cans.

Aijiren’s 9mm Screw Cap with Septa is automatically produced by machines. The same batch specifications meet the needs of customers for experiments. And mass production can also meet the orders of customers around the world, and mass orders can also be satisfied. Because of this, Aijiren’s fast shipping speed and good product quality have enabled Aijiren to become a world-renowned supplier of chromatography consumables.

PTFE disposable syringe filter is a fast, convenient and reliable filter tool, often used in laboratories. It has the characteristics of beautiful appearance, light weight and high cleanliness. Because there is no need to replace the filter membrane and clean the filter, it saves tedious and time-consuming preparation work. It is widely used in laboratories, widely used for sample pre-filtration, clarification and removal of particulate matter, and sterilization and filtration of liquids and gases.

18mm Screw Neck Closures 18mm screw neck vials with magnetic screw seals for CTC is a new product in the headspace market where the jaws dominate. Especially for magnetic caps that are difficult to crimp, screw caps are a convenient alternative. 18mm Screw Neck Closures with Vial are preferentially used in instruments: CTC PAL, Varian, Gerstel, Atas, Shimadzu, Aijiren.

Aijiren’s syringe filter with nylon membrane is compatible with a variety of solvents and is very suitable for rapid filtration of most aqueous and organic solutions. Therefore, when the mixture of the sample aqueous solution and the organic solvent passes through the membrane, the fine droplets of the extraction solvent gather and separate from the sample aqueous solution. The nilong syringe filter produced by Aijiren is environmentally friendly and has no centrifugal effect. By filtering the receptor phase, it can provide a higher sample purification rate.

20mm PTFE Septa can overcome the degradation that occurs due to long-term high temperature, because it is very common in silicone rubber septa. Degradation causes baseline drift and extra peaks. Therefore, the 20mm PTFE Septa produced by Aijiren is usually fixed with the PTFE side facing the column packing. For most GC/MS and other high-sensitivity detectors, Aijiren recommends septa materials with the PTFE logo; these are the cleanest and highest performing products. The PTFE septum contains very low levels of contaminants, which minimizes interference with the analysis and guarantees excellent results on all major LC/MS and GC/MS instruments.

How to choose a precise syringe filter: Aijiren disposable syringe filters come in many types. There are mainly two series, one is hydrophilic and the other is hydrophobic series. The syringe filter has two diameters: 13mm and 25mm. The pore size of the filter membrane is 0.22, 0.45um. Membrane materials include: RC, nylon, PVDF, PTFE, etc. It is important for customers to choose the right membrane.

The PTFE layer of Aijiren’s 20mm PTFE Septa composite diaphragm is in contact with the reagent. It is chemically inert, resistant to acids, alkalis, temperature and adhesion. Even at high temperatures, it cannot work with concentrated acids, alkalis or strong oxidants. At the same time, the elasticity of the silicone rubber or silicone layer can ensure the sealing performance; Aijiren abides by strict production management to ensure the quality of the product. The product is clean and can be used directly without washing.

Aijiren uses a dust-free workshop to produce 9mm closures. The 9mm closures produced in a dust-free workshop have strict quality standards and uniform threads, which guarantee the quality of Aijiren’s products. Aijiren is planning to use product quality to build brand awareness and become a world-renowned supplier of chromatography consumables.

9mm Screw Neck Closures-Polypropylene Screw Cap with two-layer material compound Septa can provide anti-evaporation seal. The double layer includes Silicone and PTFE. This compounded Septa can be used for multiple injections. And it is matched with a PTFE lined screw cap for organic samples. The screw cap provides an inert, air-tight seal and the use of a syringe needle to directly penetrate the sample.

The standard sample vials for GC and HPLC have a 9mm opening to facilitate sample storage. It can be used with 9mm Closures. There are different colors of open cover, solid cover and a variety of septa suitable for different applications for customers to choose. Aijiren produces Closures in a clean room. It is Aijiren’s efforts to ensure the high quality of 9mm Closures and 9mm hplc vial.

The blue high-quality PP bottle cap of 9mm Screw Neck Closures will be combined with Septa. Aijiren has a unique patented method to combine Silicone and PTFE. Septa produced by this patented method is combined with a chemically inert Cap to avoid excessive evaporation and keep the sample bottle well sealed. It is recommended for short-term storage or liquid chromatography. Aijiren produces a variety of colors of 9mm Screw Neck Closures to choose from to meet different needs.

In addition, the material of Butyl determines that Septa is not easy to deform, even if it is used for a long time, it is stretched. Aijiren uses high-quality raw materials, which ensures that Butyl Septa will not break and contaminate the sample when it is penetrated by the automatic injection needle in time.

Aijiren¡¯s syringe filter has many different types of membranes. Aijiren can also sell membranes separately. Different reagents need to choose membranes of different materials to avoid the reaction between the membrane and the reagents and affect the experimental results. Aijiren usually recommends customers to choose PTFE, because PTFE is extremely inert and suitable for most reagents.

Aijiren’s Caps all come with Septa, and 9mm Cap is the most popular choice, because 9mm Cap with Vial are Aijiren’s hot-selling products. The screw Neck design ensures the consistency of the seal and the pattern, and the seal is good, and it is convenient for manual operation. The operation meets the needs of laboratory personnel, and the packaging of 100pcs meets the convenience of experimental use.

The thread of the magnetic metal cap fits closely with the Headspace Vial, and the thickness of Septa can also ensure that it is slightly squeezed to achieve a sealing effect when the cap is closed by Vial. The Cap with a center hole can facilitate sample injection without leaking reagents. The function of magnetism is to better fit the autosampler.

Aijiren uses PP Boxes for packaging. Generally, Aijiren uses 100pcs/pack, and the box has strong anti-impact ability. It is not easy to cause the vial to break during transportation. Aijiren’s 2ml hplc Vial has three different calibers to choose from. Screw, crimp and snap, the openings are divided into 8mm-11mm, many types are convenient for customers to choose.

The packaging of Sample Storage Vial produced by Aijiren uses PP Box, 100pcs is a box, Aijiren’s minimum order quantity is generally 10 boxes, because the order of too small quantity will cause the volume of the vial to be larger, and the shipping cost is more expensive than the product price. In order to avoid this situation, Aijiren set the sample storage Vial’s minimum order quantity to 10 boxes.

Aijiren’s septa can choose whether to have pre-slit or not. The pre-slit pattern is divided into one-shaped and cross-shaped. The septa with pre-slit is better to be pierced, especially for blunt automatic injection needles. , The cross star pre-slit septa can guide the automatic injection needle to accurately enter the vial to suck liquid, and will not deviate from the direction and cause the automatic injection needle to poke on the vial and cause the via to rupture.

The 24mm Screw Cap produced by Aijiren is often paired with 24mm Sample Storage Vial. This type of Vial is used to store samples and sometimes used in autosamplers. For example, 40ml Vial is often called EPA Vial, and the center hole on the Cap is here. It will be useful in time, the sampling tool can easily pierce through the septa for sampling without causing sample contamination.

Aijiren’s Septa made of high-quality raw materials can protect the seal inside the Vial to a certain extent, and will not break or fall off the cap after the automatic injection needle is punctured. This is to a large extent. Gas chromatography experiments provide convenience, and bring safe and accurate results.

Aijiren’s Closures are usually 100pcs as a pack, and the matching Headspace Vial is also 100pcs as a box. This kind of packaging is convenient for customers to use. Aijiren can provide a set of Via and Closures purchased together, and it also supports the purchase of Closures separately.

In order to produce 9mm closures, Aijiren purchased brand new automatic production equipment, such as septa production machines and Cap production machines, and Aijiren can also automate the assembly of Cap and Septa, and realize the pre-cutting machines for Septa, all of which are available in the Aijiren factory of.

The 9mm screw cap produced by Aijiren has a center hole to facilitate the sampling of the injection needle of the autosampler. The injection needle will penetrate the septa and enter the interior of the vial for extraction. The thread pattern of the 9mm screw cap fits closely with the vial. Septa is slightly squeezed between the cap and vial to fill the gap, so the sealing is extremely high.

But for autosamplers with blunt autosampler needles, Aijiren still recommends buying septa with pre-slit, because this can prevent the septa from being pushed into the vial by the autosampler and contaminate the sample. Septa with pre-slit can complete the function of guiding the automatic injection needle.

Aijiren recommends that each syringe filter be used only about 10 times. If there are too many impurities in the reagent, the pore size of the syringe filter will be blocked and the filtration task cannot be completed. The Syringe filter provided by Aijiren has a favorable price and good quality. It is very suitable to change to a new Syringe filter to continue filtering after using it several times.

Aijiren’s 2ml hplc vial is suitable for most autosamplers, because this 2ml hplc vial has a standard thread/snap/crimp caliber pattern and a uniform shoulder distance, which is very convenient for the robot arm of the autosampler to grab it. As shown in the picture, Aijiren will prepare PP Boxes for Vial in advance, and wait for Vial’s production or printing before packaging and shipping.

Aijiren’s sample storage vials are produced by fully automated machinery. This production method is efficient and consistent in specifications, and it is not easy to make errors. The packaging is a PP box, 100pcs is a box for packaging, the customer should purchase according to the box when purchasing, the minimum order quantity of Aijiren is 10 boxes.

The Crimp Closures produced by Aijiren are made of aluminum. This metal Cap is very strong and will not leak air after the Hand Crimper is sealed. Aijiren uses plastic sealed bags to pack 100pcs/pack. If customers need, Aijiren also provides plastic cans. This kind of packaging can reduce squeezing and ensure that each closure is complete.

Aijiren currently cooperates with Turkey, Bangladesh, India, the United States, the United Kingdom, Italy, France, etc. 2ml HPLC Vial is often used in chromatographic analysis experiments. The 2ml hplc vial produced by Aijiren can match most chromatographic analysis instruments, including gas chromatography. You can also use 2ml hplc vial.

Aijiren’s septa for 24mm screw closures uses natural-color Silicone and PTFE. These Septas have a diameter of 22mm and a thickness of 3mm, which are consistent with the size of the Cap and can be placed between the Vial and the Cap to isolate the air and the sample. The size is 3mm. The thickness is also very suitable for needle piercing. The material of Septa is soft and tough, not easily deformed and will not break.

Aijiren produces headspace vials for the convenience of gas chromatographic analysis. Gas chromatographic analysis requires heating and other methods to vaporize the liquid in the vial and extract gas for detection and analysis through an automatic injection needle. Gas chromatograph requires the vial to have good airtightness and heat resistance. With strong stability and large capacity, the crimp top headspace vials produced by Aijiren perfectly meet these conditions.

Aijiren can merge septa and cap, and before the merger, the machine can automatically identify the front and back of septa, silicone and PTFE surface, choose to fix the PTFE side up into the Cap, fully automated production saves a lot of manpower, Aijiren Be able to invest more talents in quality inspection and product development.

There are two types of 24mm Screw neck Cap, center hole and closed-top. The cap with center hole can be more convenient for sample injection. The closed top can store samples and has better sealing. It can have its own for 20ml-60ml. Storage range and capacity.

The septa produced by Aijiren uses high-quality raw materials. The raw materials are softened and heated into a mold into a shape with the same size and size. Then, a unique process is used to combine Silicone and PTFE, and finally cut and cut into a size suitable for Vial. . Aijiren, as a rubber factory, has enough experience and strength for Septa’s quality assurance.

The special packaging used in the 2ml vial in the picture, 100pcs in a box with a partition to separate the vial. This kind of packaging is not only more compact and beautiful, but also can better alleviate the vibrations that occur during transportation and protect the vial. At the same time, it can also bring the brand logo printed on the box, Aijiren can meet the customer’s packaging customization plan, only need to communicate the details in place and pay the corresponding packaging costs.

Aijiren adopts septa’s automated production, which guarantees Aijiren’s batch and efficient production. It is precisely because of this production that Aijiren has become a chromatographic consumable supplier in more than 200 regions around the world. If there is any need for chromatographic consumables, please Contact Aijiren.

The screw closures produced by Aijiren are used for 9mm screw vial. 9mm screw vial is the most commonly used autosampler vial. Because of the 9mm opening and 12*36mm bottle body, it is compatible with most types of autosamplers and the convenience of screw closures It has also become the reason why screw vial sells well.

It is worth noting that Aijiren’s production workshop is a dust-free workshop, but after packaging and transportation, Aijiren recommends that customers perform pre-cleaning treatment before using it. If customers need sterile Vial, they need to perform sterile treatment by themselves before using it.

Aijiren¡¯s 1.5ml amber vial production plant has a professional production line and production team, and has been strictly checking the product quality during the production process. If any 1.5ml amber vial that does not meet the standard will be immediately eliminated, it is precisely because of Aijiren¡¯s strict product Controlling talents has created Aijiren’s brand effect today and has become a well-known supplier of chromatography consumables in China.

Aijiren’s 2ml hplc vial adopts a fully automated production method, mass production guarantees a large amount of daily production, Aijiren has 6 vial production lines, and can also be customized for logo or label, scale printing, and closures. Aijiren Provide the option of purchasing vial/cap separately or purchasing vial and cap together.

Aijiren’s factory is established in Quzhou, Zhejiang, which is close to the river and developed by land and water. Usually, Aijiren will notify the relevant freight forwarding company to pick up and deliver the goods after the production is completed. Generally speaking, the shipment can be completed within 3 days after the production is completed. , The next step is the time for water transportation. If the demand is not particularly large, then customers can consider express or air freight, which will be faster.

Aijiren is usually packaged in PP box, 100 pieces are sold in a box. Closures can be packaged separately. As a production company, Aijiren can provide a large amount of spot production, and it can also meet multiple orders at the same time. Aijiren¡¯s lowest price The order quantity is 10 boxes, because sending too few products overseas will cause the postage to be higher than the product cost.

The PTFE Syringe Filter in the picture has an aperture of 0.22, an outer diameter of 25mm, and a purple color. Aijiren also offers many other colors of Syringe Filter, such as yellow, pink, blue, green, etc. Customers can choose according to their preferences . The Syringe Filter produced by Aijiren can be equipped with many different types of filter membranes, which can be selected according to the reagents that customers need to filter.

Aijiren¡¯s 9mm Screw Thread is short, and can be sealed with a slight rotation. The shoulder and neck lines are also very convenient for the autosampler to grab, and it is not easy to slip off. The vial can also customize the logo and whether it has a writing area. Aijiren will continue to make efforts for the convenience of the laboratory.

Aijiren adopts the latest production technology. The fully automated production line can meet mass production. Sample Storage Vial has undergone strict quality inspection during production. Any vial that fails the quality inspection will be returned for reprocessing. Aijiren has its own quality inspection. The system and design laboratory will always strive to bring more updated products and better product experience to customers.

Aijiren has more than ten years of production experience. Workers, test managers, and product development managers have rich experience in chromatography consumables. Aijiren has become one of the well-known manufacturers of chromatography consumables in China. Providing services in more than 200 countries and regions in the world, Aijiren will do better and work hard.

Aijiren is a factory-type enterprise specializing in the production of Autosampler Vial. Aijiren has its own production line that can mass-produce and automate production. Aijiren¡¯s 9mm Autosampler Vial has always been the most popular and the highest-selling product. The flat brown is also a popular choice for customers.

Aijiren is a manufacturing enterprise with its own production machines and production lines. Customers can customize Vial and Closures according to their own needs, such as logo customization, capacity selection, solid or center hole Cap, septa selection, etc. And so on, because of these exclusive customized services, Aijiren can become a professional and satisfied customer supplier of chromatography consumables.

Aijiren has always insisted on using high-quality glass, because only the quality of the glass is high enough to be compatible with more samples and more convenient for customers to experiment. Therefore, Aijiren decided on borosilicate glass after various comparisons. This glass is not only resistant to high temperature and corrosion It is also inert and not easily broken, which is very suitable for large-capacity 60ml sample storage vial.

Aijiren provides as many product types as possible for every customer who uses chromatography consumables. Among them, 9mm Vial and Closures are one of the most popular choices. Aijiren will continue to work hard to improve product quality and control the monitoring of the production line. Ensure that there are no errors between products.

The Cap of Closures in the picture has a Center Hole, which is convenient for Autosampler to perform needle sampling. If you are worried about the difficulty of automatic injection needle sampling, you can also consider purchasing a pre-slit septa. This type of septa is divided into a cut and a cross The two types of incisions are especially useful for blunt circular injection needles.

18mm Magnetic Metal Cap with Center Hole for more convenient for the automatic injection needle to perform sample injection.Generally speaking, the Septa in the 18mm Closures uses a double-sided compound of Silicone and PTFE Septa, which makes it difficult for Septa to react with reagents, and it can also protect impurities in the air from falling into the vial.

Aijiren’s I type transparent EPA storage glass vial is used for various analysis, sample, extraction and standard storage. , Bottle with PP fixed or open top cap. The fixed top cap is lined with fluoropolymer resin. The open top cap has an ultrasonically bonded 3.1mm fluoropolymer resin/silicone diaphragm for volatile organic compounds analysis.

Aijiren¡¯s 2ml clear hplc vial is fully automated. There are 3 production lines in the workshop, which can meet mass production orders. As a professional manufacturer of chromatographic consumables, Aijiren¡¯s products will be sold with matching Cap with Septa, Closures colors and Styles can also be selected.

Aijiren’s Syringe Filter is usually 100pcs/pack. Generally speaking, it is packaged in a plastic box. If the Syringe Filter is packaged in a plastic box, the Syringe Filters will not squeeze each other. The recommended minimum order quantity is 30 boxes.

The Crimp Top headspace vials are made of borosilicate hydrochloric acid. It has a transparent and amber color and can withstand a temperature range of -60 to 200 degrees Celsius. Generally speaking, the volume of the headspace vial is 10-20ml, and the characteristic is 22.5*46/75mm. The performance is acid resistance, alkali resistance and high temperature resistance. Packaging usually adopts inner packaging shrink plastic box.

Aijiren PVDF filters are high defined pore structure, low nonspecific binding, compatible with organic and aqueous solvents. Please note that Hydrophilic PVDF syringe filters are not compatible with majority of strong acids and caustic solutions, such as dimethyl sulfoxide, dimethylformamide (DMF), acetone, ketones, esters, and ethers.

Syringe filters are made of many different types of materials. Various materials, diameters, pore sizes, and sterile and non-sterile options are on our list. These syringe filters provide excellent microfiltration performance for HPLC, water treatment, environment, biotechnology, beverage, food, pharmaceutical and other related fields.

Buy Aijiren Sample Storage Vial online at wholesale rates. If you have been looking for Sample Storage Vial, your search ends here as you can get the best Sample Storage Vial in China. You can purchase Sample Storage Vial of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Sample Storage Vial prices, you can be totally sure to get the best rates as Aijiren brings you genuine Sample Storage Vial rates and quality assured products. Procure Sample Storage Vial today and avail the best offers on your purchase.

Aijiren’s 9mm Amber Vial has a huge production workshop and many production lines. The 9mm Amber Vial provided by Aijiren is 100 pcs/pack. Generally speaking, it is packaged in PP Box. The minimum order quantity is 10 boxes. It supports two-in-one packaging with PP Closures or Individually packaged.

Aijiren offers a variety of sizes and styles of containers, including the popular 40mL autosampler vials. Sample Storage Vial can be used as: Sampling and storage containers, sample vial compatible with autosampler, culture tube, TOC test, USP Method 643 test, Capture high-purity water offline, Store verification standards.

9mm Closures are formed by the combination of Cap and Septa. Screw Neck guarantees the tightness of 9mm Closures. Generally speaking, one end of PTFE faces the sample surface, because PTFE is highly inert and difficult to react with chemicals. Aijiren also supports separate orders for Cap and Septa.

Aijiren’s 9mm Autosampler Vial, Screw Threads neck fits perfectly with Closures, and the thread seal is also convenient for customers to operate. This type of vial is a hot selling model that can be applied to all models of Autosampler.

As an important tool for filtering reagents, the Nylon syringe filter plays a very important role, especially in chromatographic consumables. A slightly larger impurity particle in the reagent may cause clogging of the instrument.

11mm Snap Top Closures are made of PP. The translucent Cap design allows users to see the fixed card slot. The inside of the Snap Cap has 4 protrusions for fixing in the lateral groove of the Vial Neck.

The nylon membrane used in the syringe filter has high mechanical strength, chemical stability, can be tolerated by most organic solvents, has very low extractables, has good thermal stability and natural hydrophilicity, and is filtered by most aqueous solutions characteristic.

Aijiren has strict production requirements, meets ISO9001 certification, and the quality of the 2ml amber vial’s raw materials is high, which can protect light-sensitive samples from deterioration due to UV interference.

The 20mm Crimp Cap is often used with Headspace Vial. It is tightly sealed and suitable for long-term storage of samples. The cap with center hole can be cut by septa, which is convenient for automatic sampling needle sampling.

PTFE is hydrophobic and needs to be pre-wetted before being used with aqueous solvents. Used for: corrosive solvents, strong acids, alcohols, alkalis, aromatic hydrocarbons. Not suitable for: water-based samples.

Septa-silica gel has strong repetitive sealability, and it can maintain good close performance after multiple injections; PTFE is a material with better chemical conditions at present, and it can withstand strong acids and alkalis. The two materials After compounding, the bottle can be used for various laboratory purposes such as sealed sampling, chemical storage and so on.

Application of TOC sample bottles: USP method 643, pharmaceutical grade water testing, water for injection (WFI), high purity water (HPW), cleaning verification test/sample, testing efficiency before and after cleaning, and “good manufacturing practice” (GMP ) Relevant traceability, TOC calibration, verification and system suitability, storage of calibration standards.

In chromatographic experiments, the sample is placed on the chromatographic column for analysis after the sampler is injected. However, the inner core of the sampler and the chromatographic column is relatively thin. If there are large particles in the sample, it may cause the device to block , Need to use Syringe Filter for preliminary sample filtration treatment.

PTFE Syringe Filter is resistant to almost all corrosive chemicals, which makes PTFE syringe filters an ideal choice. However, the disadvantage of natural hydrophobic PTFE is that after many chemicals are diluted with water, the aqueous solution cannot pass through. Need to be wetted with water in advance.

Storage Vial is supplied by Aijiren. These vials are pre-sterilized and have a capacity of 5ml. These vials can be used for storing biological material, human and animal cells. The cap is provided with a built-in seal ring which makes the vial leakproof. The base of the vial has longitudinal grooves which gives it a non-twisting character when placed in a vial rack.

The PTFE syringe filter is a general-purpose filter, and it is also Aijiren’s higher-selling syringe filter. PTFE is inert to many aggressive solvents and strong acids and alkalis. These syringe filters can also be exposed to high temperatures and are an excellent choice for HPLC sample preparation. Aijiren offers PTFE syringe filters in a hydrophobic state.

Threaded storage vials have excellent chemical stability, colorless and brown are available, and have excellent sealing and corrosion resistance. This series of products are designed and produced in accordance with the requirements of the US EPA, with good storage properties. The septum and plastic cap are combined together to avoid excessive evaporation and keep the sample vial properly sealed.

Aijiren understands that 2ml HPLC vial are as important as chromatography columns or instruments. As a result, Aijiren 2ml HPLC sample vial are designed to meet the highest standards you can expect. So 2ml HPLC vial can be exported to 32 countries.

A solid disk of PTFE offers superior chemical inertness against the most aggressive solvents. The thin membrane allows for easy penetration by most needles. PTFE septa are not resealable. They should be used with relatively short cycle times or single injection methods.