Pre-slit PTFE/Silicone Septa

1.Vial racks are available for 1-4mL vials.
2.PVC racks feature a clear see-through lid.

High recovery Vials are manufactured from heavy wall, low extractable, borosilicate glass providing excellent chemical resistance and durability during packaging and transportation.

Aijiren Headspace Vial and Cap facilitates automatic quality control or sample selection by performing headspace gas analysis. Common applications of Aijiren Headspace Vial and Cap include detection industry analysis, gas in polymers and plastics, volatile substances in beverages and foods, perfumes and cosmetics; also used to analyze the gasification of volatile organic solids and liquid samples. In recent years, the popularity of this technology has been recognized by laboratories around the world.

2mL Clear Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vial, the product material is of paramount importance.

Feature and benefits: 0.2 ¦Ìm hydrophobic air filters are excellent industrial air filter media. Testable by water break through (WBT) test or bubble point testing.Passes USP Class VI biosafety tests for plastics. Manufactured in clean room facilities. Range of filtration areas from 4¨C2000 cm2 to support filtration volumes as small as one liter and as large as a large tank vessel

A solid disk of PTFE offers superior chemical inertness against the most aggressive solvents. The thin membrane allows for easy penetration by most needles. PTFE septa are not resealable. They should be used with relatively short cycle times or single injection methods.

Polyethersulfone (PES): Hydrophilic, stable in low pH, have low levels of extractables, and exhibit low protein binding, making them suitable for many aqueous and organic solvents. PES membranes allow higher liquid flow than PTFE. Temperature resistant. pH range ~3-14 (sometimes quoted as 1-14).

Compared with crimping seals, threaded vials and caps have lower evaporation, reusability, less damage to hands during operation, and no special tools are required. The 8-425 neck mouth represents a vial with a diameter of 8mm. The outer diameter of the thread of the vial is 8mm, and the thread pattern is 425.

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

PVDF syringe filters are made of hydrophilic PVDF membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes.

2ml snap autosampler is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass, and attach a writable label for sample identification.

The vial cap is made of high-quality polypropylene, and the septum is made of the highest-quality materials. The precise manufacturing tolerances and the controllable manufacturing environment ensure the high efficiency of product functions.

PTFE is the most inert but its poor resealability making it unsuitable for multiple injections or storage. For layered septa such as PTFE/silicone the chemical resistance of the septa is that of PTFE until the septum is punctured. Once punctured, the silicone layer is exposed and able to react with sample/solvent so the chemical resistance of silicone should be considered when using these septa.

Headspace vials can withstand the higher temperatures and internal pressures required for volatile gas analysis. With very low metal content, extractables and leachables, top headspace vials meet high standards to meet your regulatory requirements.

PTFE / Silicone Septum with Pre-slit 
in order to pierce easily
Diameter: 8mm to 22mm
Thickness: 1mm, 1.5mm, 3mm
Packing: 100pcs/pack, Inner PE bag; Standard Carton outside

Aijiren reusable media bottles are manufactured from high quality, borosilicate 3.3 glass. With their superior chemical resistance, these bottles are ideal for storage of reagents, culture media, biological fluids and a variety of other aqueous and non-aqueous solutions.

The chromatographic direct range of 20mm crimped top-space sample vials and caps are available in 20ml amber and transparent colors, 10ml and 6ml with a variety of flat-bottom and round-bottom shapes, suitable for autosamplers of many brands on the market. Our 20mm crimp cap with silicone/PTFE Septa is compatible with all autosamplers.

Hand Decrimper also called hand decapper, is used for crimp caps open. Easy and economical manual decrimper for two different cap sizes (ND11 and ND20). Suitable for aluminium and bi-metal caps, not for magnetic caps.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The

The glass media bottle is made of borosilicate glass or soda lime glass and equipped with a plug or cover to prevent the contents from overflowing or being polluted by the external environment. Reagent bottles are ideal for storing powders and liquids. Amber or red media bottles can protect photosensitive contents from ultraviolet, visible and infrared radiation.

Autosampler vials are generally made of hydrolytic glass or borosilicate, with various specifications. Different bottle mouth designs meet different actual needs. The 1.5ml 11mm crimp-top autosampler vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use.

The  GL45 Reagent Bottle is made from high-quality borosilicate glass, ensuring durability and chemical resistance. This glass material is known for its excellent thermal stability, making it suitable for a wide range of reagents and solvents commonly used in laboratories.

Glass Vial Inserts for 2ml HPLC Vials
Volume: 150ul, 250ul, 300ul
Bottom Type: Mandrel Interior & Polymer Feet; Conical Bottom, Flat Bottom
Suitable for : 8-425, 9mm, 10-425, 11mm Vials