9-425 glass vial 2ml Waters HPLC Chromatography Vial

Features:
1) 8mm screw vials can be used with all common autosamplers
2) Standard narrow neck design for GC and HPLC
3) 8mm wide opening that is easy to drill holes

Aijiren’s Snap Vial is commonly used in HPLC analysis and is popular because of its convenient sealing. The glass of Aijiren snap vial is borosilicate hydrochloric acid glass that can hold samples and is not easy to change. The Cap of Snap Vial is Pe Cap, which is soft and easy to handle.

The opening of the vial produced by Aijiren is 40% larger than the standard opening aluminum sealed bottle
It is made of transparent Class 1 Class A or Amber, Class 1 Class B borosilicate glass
Sample vials provide standard progressive pasteable patches for easy filling and identification

2ml snap top HPLC vial is made of Type 1 borosilicate glass. 2ml Snap hplc Vials mouth is wider opening. So 2ml snap top HPLC vial is easier to fill and provides a larger target area for the autosampler needle. That is to say, the 2ml snap top HPLC vial can protect the needle.

Snap Vials are manufactured from Type 1 borosilicate glass(Class A, 33 expansion borosilicate glass), available in clear or amber, or from Polypropylene. Snap Vials accept both an Aluminum Snap Seal as well as a Polyethylene Snap Cap. Excellent for short term storage. Deactivation, MS Certification is also available.

Aijiren’s chromatography bottle has a wide-mouth crimp cap that provides a larger target area and improves the accuracy of the autosampler needle. Can be made of clear and amber glass. The label can be written area, can help the experimenter to distinguish the sample type.

2ml crimp top vial from Aijiren is made of high-quality borosilicate hydrochloric acid glass, which can effectively prevent chemical substances from reacting with Vial to affect the results of the experiment. The glass of Vial has two colors, Clear and Amber, and customers can put it according to the claim The characteristics of the samples are selected.

Snap Top 2ml HPLC Vials can accommodate 250uL Micro-inserts,The specifications of Micro-insert are 29*5.7mm, 31*5.7mm, and 31*6mm. You can choose Micro-insert according to your needs. This is more helpful for HPLC analysis of precious samples, which can save samples without causing waste.

Aijiren’s Snap Top Vial is suitable for most Autosamplers on the market, especially Waters’ Autosampler. If you are using Waters’ autosampler, you can consider purchasing Aijiren’s Snap Top Vial for use. The Cap of Snap Top Vial has a center hole to facilitate the automatic injection needle to take samples.

2 ml snap top autosampler borosilicate glass vials are a specific type of vials commonly used in analytical laboratories and automated sample handling systems. They are designed for convenient and secure sealing, as well as compatibility with autosamplers for efficient sample handling.

Material: Brosilicate Glass/1st hydrolytic class glass
Volume: 1.5-2.0ml
Dimension: 11.6x32mm
Neck: 9mm Screw neck
Color: Amber and Clear
Septa: Pre-Slit, PTFE/Silicone
OEM & ODM Custom Service

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Suit for: 9mm Short Thread Vials
Caps Material: polypropylene
Cap Diameter: 9mm
Cap Features: 6mm Centre Hole or Closed Top
Septa Material: PTFE / Silicone
Septa Feature: Pre-slit I or X
Septa diameter: 9mm
Septa Thickness: 1mm

If the reagent to be tested by the customer is very precious and the capacity of 2ml vial is too large, Aijiren 8-425 2ml Autosampler Vials can be used with different types of micro-insert. There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert. All three types of micro-insert can be adapted to 8-425 2ml Autosampler Vials.

Snap caps provide a secure seal that minimizes evaporation, even with volatile samples. Snap caps are often more convenient than crimp caps as they can easily be applied and removed by hand. An audible click ensures a secure seal has been formed and that the cap is correctly aligned. Snap/crimp vials can be closed with either snap caps or crimp caps.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

The Aijiren 2ml crimp autosampler vial requires an 11mm crimp finish and requires an aluminum seal closure. Crimping aluminum caps are superior seals than screw caps and snap caps. In addition, crimp caps are resistant to high temperatures. However, a 2ml crimp autosample vial requires tools to seal the vials. This can increase costs. Aijiren is a 2ml crimp top autosample vial manufacturer. If you are buying a 2ml crimp top autosampler vial, you can get it from Aijiren at wholesale prices. Welcome to contact us.

9mm Blue Plastic Screw Caps is suitable for: 9mm Short Thread HPLC Vials
Caps Material: polypropylene, size: 11.5*6mm, inner diameter: 9mm, with 6mm Centre Hole or Closed-Top
Color: usually blue, other colors are also provided, such as red, black, yellow, etc
The Septa are PTFE / silicone, size: 9*1mm, the sapta could be pre-slit

Autosampler borosilicate glass vials are specifically designed for use in autosamplers, which are automated instruments used in high-performance liquid chromatography (HPLC) and other analytical techniques. These vials are constructed from borosilicate glass, known for its excellent chemical resistance and thermal stability.hen selecting autosampler borosilicate glass vials, it is essential to consider factors such as vial size, closure compatibility, and the specific requirements of your autosampler instrument.

These caps form an exceptionally tight seal and offer a good chemical barrier. This liner molds itself around the sealing areas of the finish as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, binding and backing off. Great for everything from liquids, to soaps, to macro-invertebrates.

Features: 32*11.6mm vial; 11*1mm Teflon/silicone septa; 11mm white open PP cover. It can be used on various autosamplers.

The 2ml Snap Vial provided by Aijiren is suitable for use on Waters Autosampler. The bayonet design of Snap makes the operation of capping Vial very convenient. Aijiren’s Snap Top Vial Cap is made of high-quality PP plastic, and can be customized in a variety of colors to meet customer needs.

Aijiren 2ml 11mm Snap Ring HPLC Vials has a standard scale and writing area for easy filling and identification. 2ml 11mm Sanp Ring HPLC vial can be matched with most autosamplers on the market, such as Aijiren, Thermo Fisher, Shimadzu and other well-known brands.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

2ml Snap Top HPLC Vial is made of Type 1 borosilicate glass. Comparing with 9mm screw vial, this 2ml Snap Top HPLC Vial mouth is wider opening. So 2ml Snap Top HPLC Vial is easier to fill and provides a larger target area for the autosampler needle. That means, the 2ml Snap Top HPLC Vial can protect the needle.

2ml crimp autosampler vial is depending on the filling volume. We differentiate between standard 2ml crimp autosampler vials and micro-vials which either have an interior or exterior volume reducing shape. Alternatively you can of course also use inserts to reduce the volume inside a vial, in order to create ideal conditions for sample removal. 2ml crimp autosampler vial with insert is larger and wider mouth than 9mm screw sample vial. 2ml crimp autosampler vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling.

1.5ml/2ml 8-425 autosampler vial (Shimadzu chromatography sample vial) is provided by Zhejiang Aijiren Rechnology Co., Ltd., instead of imported Shimadzu sample bottle, standard GC, HPLC sample bottle, 5MM caliber, 8-425 standard Threaded port can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum. The bottle cap is made of high-quality polypropylene, and the septum is manufactured with high-quality materials to ensure the efficiency of the function.
Applicable to: Beckman, Diane, Finnigen, Gilson, LKB, Thermoelectric Thermo, Varian Varian, Shimadzu and other autosamplers.