Headspace vials can withstand the higher temperatures and internal pressures required for volatile gas analysis. With very low metal content, extractables and leachables, top headspace vials meet high standards to meet your regulatory requirements.

Aijiren provides one of the widest selections of Caps, Closures, and Lids available. Select from a wide variety of metal and phenolic, and polypropylene plastic bottle caps, vial lids, and other closures with an array of lining systems to fit your application and container. We also feature dispensing caps, hole caps, septa, tube caps and vial caps.

Headspace vials have different capacity specifications, including 6ml, 10ml, 20ml, etc. Use a standard sample vial to ensure sufficient headspace. Usually, the reserved volume should be at least 50% of the sample volume.

Metal caps offer the widest range of temperature tolerances and are very resistant to fracture from impact. Metal caps are great for gas chromatography applications. A metal closure is manufactured from either steel (coated with anti-corrosive coating of either chromeplate or tinplate) or aluminum.

Aijiren Tech Headspace Vials are available as screw or crimp neck vials with flat or round bottoms, with clear or amber glass. Headspace closures are available in pre-assembled caps with septums or can be ordered individually. Pressure release, seal with lining, and seal with magnetic lining is also optional.

The material of the headspace sample vials is low-extraction borosilicate glass, which is characterized by low expansion, high temperature resistance, high strength, high hardness, high light transmission and high chemical stability. Headspace vials are suitable for headspace analysis of volatile solids and gases. 20mm crimp headspace vial is widely used in Headspace and GC, GCMS application.

A solid disk of PTFE offers superior chemical inertness against the most aggressive solvents. The thin membrane allows for easy penetration by most needles. PTFE septa are not resealable. They should be used with relatively short cycle times or single injection methods.

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

Aijiren Tech crimp top headspace vials are available in a flat or round bottom style, with clear or amber glass. Headspace closures are available in pre-assembled caps with septums or can be ordered individually. Pressure release, seal with lining, and seal with magnetic lining are also optional.

Aijiren’s Headspace Caps often use metal material aluminum, which is soft and convenient for Hand Crimper and Decrimper for sealing. Not only that, the Septa produced by Aijiren is also made of high-quality silicone and ptfe, and is pressed with an exclusive process. This kind of septa is not easy to deform, break, and fall off, and it can also ensure the tightness of the vial.

Headspace Crimpe Vials are available in volumes from 6 mL to 20 mL. We offer Headspace Crimpe Vials with a flat top or a beveled top, and are available with either a flat bottom or a rounded bottom Headspace Crimpe Vials for your application.

20mm crimp-top headspace vials are a type of laboratory vials commonly used in gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS) applications.
These vials are specifically designed for the analysis of volatile compounds in samples.
Headspace analysis is used when analyzing volatile or semi-volatile compounds that can be released from a solid or liquid sample into the gas phase.
This technique is particularly useful for samples that would be difficult to directly inject into a GC system or when analyzing volatile compounds in complex matrices.

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

Headspace vials can withstand the higher temperatures and internal pressures required for volatile gas analysis. With very low metal content, extractables and leachables, they meet high standards to meet your regulatory requirements. These headspace vials have been specification certified for physical dimensions and autosampler compatibility.

Aijiren, as a supplier of chromatography consumables, provides headspace vials and sealing plugs. Aijiren s headspace vials and caps are carefully designed to prevent sample contamination and ensure accurate analysis. They come in various sizes and glass types. Optional crimping or threaded vials.

A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

All 20mm Headspace Crimp Vials may appear to be created equal, but quality and performance make the difference when analyzing vital samples. Aijiren 20mm Headspace Crimp Vials are cleaned and packaged in a certified Class 10,000 clean room according to a designed process, developed to eliminate chromatographic errors associated with vials.

The 20mm septum is made of PTFE/silicone fusion, which has excellent inertness and can be used for multiple injections. The thickness is 3mm, and PTFE is about 0.08mm. The cap of the clamp-top empty bottle is made of metal aluminum

Headspace vials are common consumables generally used in gas phase experiments. Headspace samples are typically prepared in vials containing sample, diluting solvent, matrix modifier, and headspace.

The round-bottomed headspace vial distributes the internal pressure generated at high temperatures on the entire glass surface, and the beveled edge has a firm edge that can be pressed into the septum to achieve a more effective seal. The flat-bottomed sample bottle has a long neck and is suitable for use with headspace automatic sampling instruments

The butyl septa on the PTFE surface can be used in the headspace sample bottle to evaluate the injection activity and the penetration efficiency of methyl bromide on the activated carbon. The septum can be used to seal the vial during liquid sample collection for unmodified benzene analysis using HPLC method

The 20mm Crimp Top Caps produced by Aijiren have a diameter of 20mm and a center hole with a diameter of 9.5mm. The color is the silver color of aluminum itself, which is very modern and beautiful. The matched septa are all 20*3mm, and the double-sided synthetic septa ensures the sealing.

Headspace vials can withstand the higher temperatures and internal pressures required for volatile gas analysis. The Color of headspace vials is divided into two kinds of brown and transparent, the brown vials can be protected from light, and the manufacturing process adopts the molding method, which has the characteristics of thick wall, high mechanical strength, and not easy to be broken.

Head space vials analysis of gases present in head space sample vials,Laboratory bottles for head space analysis are called head space vials.
To get accurate results,We also have certain requirements for sample bottles and septa.
Head sample space are available with round bottom and flat bottom,as follows:
The round bottom is compatible with most automatic samplers,and the sample arm is convenient for carrying the sample vials from tray.
The flat bottom can achieve a high level of heating efficiency during manual head space injection and is suitable for certain types of instruments.

1. Septa and slit septa are available. 2. The usually available cap color is silver, and other special colors can also be produced accordingly. 3. Easy to apply and easy to remove. 4. Aluminum sealing ring with pre-inserted septum is compatible with standard opening crimp top vials.

Grey PTFE/Moulded Butyl Septa & Grey PTFE/Pharma-fix Butyl Septa for 20mm crimp vials, Size: 20*3mm, 100pcs/pk