ND11 Snap Top HPLC Vial for Aijiren

The sample vial and caps have strict size standards and can be matched with various models of autosamplers such as Aijiren, Waters, Varian, and Shimadzu.

11mm Natural Snap-top PE Caps, 6mm Centre Hole
White PTFE/Red Silicone Septa 11*1mm
for 11mm Glass Snap Top Vials

Snap Cap Vials Wide opening vial is easier to fill and provides a larger target area for the autosampler needle Fit most autosamplers that accommodate the 12x32mm vial format Superior quality 33 expansion borosilicate clear glass Type 1, (Class A) or 51A amber glass Uniformly flat

The 2ml snap HPLC vial is made of type 1 borosilicate glass. Compared to 9mm screw vials, this 2ml snap hplc vial opening is a wider opening. Therefore, the 2ml snap top HPLC vial is easy to fill and increases the target area of the autosampler needle. This means that 2ml snap-top HPLC vials can protect needles.

The 2ml snap-top HPLC vial size is 11.6x32mm and is compatible with most autosamplers such as Aijiren. 2ml HPLC vials are available in amber and transparent colors. The bottom of the vial is flat. It is convenient to put. Aijiren offers 2ml snap-top HPLC vials and pads at wholesale prices.

Padded 2ml snap top Autosampler vials are widely used in experiments. The pads are made from PTFE and high quality silicone rubber or ultra-high purity silicone as raw materials. Make sure the gasket is non-toxic. Using an adhesive-free adhesive process, PTFE film and silicone rubber or silicone adhere and maintain a composite post-interval Teflon layer contact reagent with good properties, good chemical inertity of the two materials.

Snap Vials are manufactured from Type 1 borosilicate glass(Class A, 33 expansion borosilicate glass), available in clear or amber, or from Polypropylene. Snap Vials accept both an Aluminum Snap Seal as well as a Polyethylene Snap Cap. Excellent for short term storage. Deactivation, MS Certification is also available.

2ml snap HPLC vials are less likely to be damaged when removing the cap because there is a lot of glass used in the vial neck. Snap-neck HPLC vials are compatible with either crimps or snap vial devices. You don’t need any special tools to remove the cap. Because seals are not as safe as crimps or threaded seals, 2ml snap HPLC vials are recommended for short-term sample storage and non-volatile samples.

Snap Cap Vials Wide opening vial is easier to fill and provides a larger target area for the autosampler needle Fit most autosamplers that accommodate the 12x32mm vial format Superior quality 33 expansion borosilicate clear glass Type 1, (Class A) or 51A amber glass Uniformly flat

Hplc Vials Septum
Red PTFE White Silicone Septum
Septum Size: 11*1mm

The 2ml snap autosampler vial is often used in conjunction with the automatic sampler. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass with a writable label for sample identification.

Snap seal vials are less prone to breakage during decapping because more glass is used in the neck of the vial. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Features: 32*11.6mm vial; 11*1mm Teflon/silicone septa; 11mm white open PP cover. It can be used on various autosamplers.

Chromatography autosampler vials are widely used in chromatography, chemistry, medical and other fields. Autosampler vials are generally made of hydrolytic glass or borosilicate, with various specifications. Different vial mouth designs meet different actual needs.

Aijiren Vials have a standard 11.6x32mm profile and are compatible with convenient 11mm snap cap or aluminum seal closures
The “Step” design ensures proper centering of limited volume inserts, eliminating missed injections
Aijiren Vials have a 40% larger opening than standard aluminum seal vials for easier sample filling and to reduce the chance of bent or broken needles during sampling

Aijiren Vials manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B, borosilicate glass
Aijiren Vials have a standard graduated write-on patch for easy filling and identification
Snap caps used with the Aijiren Vial system are a convenient alternative to aluminum seals
Snap caps or aluminum seals ensure a secure seal for samples

Aijiren 2ml 11mm Snap Ring HPLC Vials has a standard scale and writing area for easy filling and identification. 2ml 11mm Sanp Ring HPLC vial can be matched with most autosamplers on the market, such as Aijiren, Thermo Fisher, Shimadzu and other well-known brands.