Laboratory Bottle 2ml Snap hplc 5.0 Borosilicate Glass Vials

“Aijiren Vials manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B, borosilicate glass
Aijiren Vials have a standard graduated write-on patch for easy filling and identification
Snap caps used with the Aijiren Vial system are a convenient alternative to aluminum seals
Snap caps or aluminum seals ensure a secure seal for samples”

All Aijiren vials are ideal for autosamplers and offer excellent chemical compatibility and ultra-cleanliness. Crimp Top Sample Vials are the most commonly used gas sampling vials on the market today. Sample vials with a capacity of 2ml, particularly suitable for laboratory use. At the same time, some vial bottoms are designed at the bottom of the bay, so the bottom is flat and compatible with automatic sampling equipment.

Too much or too little resistance to the needle can damage the septum, damage the re-sealing, the needle may be clogged by the core ring of the septum material, or the autosampler may be damaged. The Used Aijiren silicone rubber/PTFE septum is designed to give moderate resistance to the autosampler needle during the injection process, so it penetrates correctly into the vial without damaging the septum or injection needle.

There are three types of 2ml HPLC Vials produced by Aijiren, Screw, Snap and Crimp Top. These three types of Vials can be used for autosamplers, but different bottlenecks are used with different types of machines, but these three types of vials The maximum capacity is 2ml, and you can choose vias with label area on the bottle.

Let me introduce the material of 8-425 2ml autosampler vials, 33 Expansion borosilicate glass USP Type I Class A made of clear vial, or 51 Expansion borosilicate glass USP Type I, Class B made of Amber vial.Our glass uses neutral borosilicate and low borosilicate, but our neutral borosilicate can reach the standard of high borosilicate, and our low borosilicate can reach the standard of neutral borosilicate. We use excellent raw materials to make 8-425 2ml autosampler vials.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

2 ml 9 mm HPLC vial kits are convenient packages that include a selection of vials, caps, and septa specifically designed for use in high-performance liquid chromatography (HPLC) applications. It ensures compatibility between vials, caps, and septa, reducing the risk of mismatched or incompatible parts that can compromise sample integrity and analysis results.

The sample vial and caps have strict size standards and can be matched with various models of autosamplers such as Aijiren, Waters, Varian, and Shimadzu.

Features: 32*11.6mm vial; 11*1mm Teflon/silicone septa; 11mm white open PP cover. It can be used on various autosamplers.

Brand: Aijiren
Mouthful capacity: 2.0ml
Material: made of grade 1 hydrolyzed glass
Color: brown
Whether OEM processing: Yes
Packing: 100 pcs/box, packed in PP plastic pallet box

2ml Autosampler HPLC Screw glass vials are small containers used in high-performance liquid chromatography (HPLC) analysis. They are designed specifically for use in autosamplers, which are instruments used to inject samples into the HPLC system automatically.
These vials are made of high-quality glass that is resistant to the solvents and chemicals commonly used in HPLC analysis. The vials have a capacity of 5 milliliters, which is the maximum volume of sample they can hold. The vials are typically clear or amber in color, with clear vials allowing for visual inspection of the sample, while amber vials provide protection against light-sensitive samples.

Snap seal vials are less prone to breakage during decapping because more glass is used in the neck of the vial. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Aijiren 2ml 11mm Snap Ring HPLC Vials has a standard scale and writing area for easy filling and identification. 2ml 11mm Sanp Ring HPLC vial can be matched with most autosamplers on the market, such as Aijiren, Thermo Fisher, Shimadzu and other well-known brands.

Vial Closure Size: 9mm
Vial Volume (Metric) 1.5mL
Volume (Metric) Working 1.3mL
Material: Glass
Color: Amber
Height (Metric) 32mm
Outside Diameter (Metric) 12mm
Residual Volume: <4μL

Approximately 40% larger than a normal small neck
The increase of the target area makes sample preparation easier
Large diameter is specially designed for automatic samplers such as Waters
The large-mouth design reduces the probability of bending and damage of the sample needle during the needle sampling process

Aijiren 9-425 HPLC Vial can choose the type with writing area and scale for easy filling and identification of samples. Aijiren 9-425 sample vials can be used with the robotic arm autosampler. The opening of the 9mm sample vial is 40% larger than that of ordinary vials to facilitate sample preparation. The Aijiren 9-425 sample vial must be used together with the 9mm screw pp bottle cap. Ensure proper fit and function.

Save time in sample preprocessing and reduce the risk of contamination with the Ajiren 9-425 screw sample vial convenience kit. Each kit includes 100 glass sample vials and 100 threaded thread caps with septum. Two reusable compartment trays keep matching supplies together while protecting vials and closures.

• Widely used in HPLC applications, universally usable vials for almost autosamplers, include the one with robotic handing.
• Snap vials can be closed with either snap caps or crimp caps.
• Snap caps can be easy as push-on, pull-off by hand.
• Clear glass vials–made from USP Type I, Class A, 33Borosilicate Expansion glass
• Amber glass vials—made from USP Type 1 Class B, 51Borosilicate Glass.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

The 2ml snap autosampler vial is often used in conjunction with the automatic sampler. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass with a writable label for sample identification.

Capacity: 1.5/2ml
Temperature: -60—200℃
Material: bottle (domestic borosilicate); gasket (Teflon/silicone); lid (polypropylene)
Color: bottle (transparent/amber), cap (blue)

Aijiren Clear 8-425 HPLC Sample Vial, Clear Type 1 Class A, Amber 8-425 HPLC Sample Vial is manufactured in Type 1 Class B Borosilicate Glass, sample identification, measurement values 0.5, 1.0 and 1.5 ml. Consistency between the vial and the true neck 6mm of the standard glass insert is always guaranteed.

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Glass vials are available in 2 ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

The opening of the vial produced by Aijiren is 40% larger than the standard opening aluminum sealed bottle
It is made of transparent Class 1 Class A or Amber, Class 1 Class B borosilicate glass
Sample vials provide standard progressive pasteable patches for easy filling and identification

9-425 Screw Cap 2ml HPLC vial is a type of vial commonly used in High Performance Liquid Chromatography (HPLC) applications. It is designed to hold samples for analysis in HPLC systems.The vial has a capacity of 2ml, which refers to the maximum volume of liquid it can hold. The 9-425 designation indicates the thread size and type of the screw cap, which is compatible with specific autosampler systems.These vials are widely used in chromatography laboratories for the storage and analysis of liquid samples in HPLC systems.

The Crimp top Vial provided by Aijiren is suitable for Water’s Autosampler. The diameter of the Crimp top vial is 40% wider than the ordinary Vial, which is convenient for the in and out of the automatic injection needle. Aluminum Cap has good airtightness, non-volatile samples, and can be stored for a long time, making it your best choice for storing samples.

Use Aijiren 11 mm Glass Crimp Top Vials with aluminum crimp seal closures. These high-quality 11 mm glass vials are 2 mL, 12 x 32 mm and fit most brands of autosamplers. Made of superior quality 33 expansion borosilicate clear (Type 1, Class A), they meet all requirements of US, EU, JPN Pharmacopia. Choose from Aijiren brands.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

Caps are made of high quality polyproylene to exact manufacturing tolerances and lined in a controlled manufacturing environment, Cap colors are available in black only, Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration.