Laboratory Bottle 10ml 20ml crimp top headspace vial for GC system

Aijiren’s 13-425 hplc vial can perfectly match Aijiren’s Autosampler. Using Aijiren’s autosampler can also be used with Aijiren’s HPLC Vials.

This Reagent Bottle is made from borosilicate glass and is great for containing liquids and powders. Featuring a white wadded screw cap, it ensures that chemicals are safely stored on shelves or in a cabinet. This bottle has a 100ml capacity and is ideal for use in the science classroom or laboratory.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

The material of the headspace sample bottle produced by Aijiren is borosilicate glass with low extraction rate, which has low expansion rate, high temperature resistance, high strength, high hardness, high light transmittance and high chemical stability. The headspace sample bottle is suitable for headspace analysis of volatile solids and gases.

Aijiren’s I type transparent EPA storage glass vial is used for various analysis, sample, extraction and standard storage. , Bottle with PP fixed or open top cap. The fixed top cap is lined with fluoropolymer resin. The open top cap has an ultrasonically bonded 3.1mm fluoropolymer resin/silicone diaphragm for volatile organic compounds analysis.

11mm Snap Top Closures are made of PP. The translucent Cap design allows users to see the fixed card slot. The inside of the Snap Cap has 4 protrusions for fixing in the lateral groove of the Vial Neck.

If the reagents you test are invaluable and the capacity of the 2ml vials is too large, you can use the Ajiren 8-425 2ml autosampler vial in different types of microinse inserts. There are three types of microinse inserts. 29* 5mm 150uL micro inserts, mandolin interior and polymer feet, 150uL conical bottom micro inserts and 250uL flat-bottom microinserts. All three micro inserts can be adapted to 8-425 2ml autosampler vials.

With the Aijiren COD tube test, each user can easily perform highly sensitive and accurate water detection.
The time required for the measurement process is significantly shortened, especially for standard analysis and series measurement, while significantly reducing the workload.
The COD Test tube contains a precise dose of reagent. Therefore, excessive chemical inventory is avoided and work safety is improved.

The 1.5ml HPLC Autosampler Sample Vial offers a precise volume capacity, allowing for accurate sample measurements and analysis. The vial’s capacity is specifically designed to accommodate the exact sample volume required for HPLC analysis, ensuring minimal waste and optimal use of samples.

Features of 11mm 2ml crimping top sample vials: Strict quality assurance provides dimensional consistency between batches, optional ceramic writing points with filling marks, certified, and fully compatible with autosample

How to choose a precise syringe filter: Aijiren disposable syringe filters come in many types. There are mainly two series, one is hydrophilic and the other is hydrophobic series. The syringe filter has two diameters: 13mm and 25mm. The pore size of the filter membrane is 0.22, 0.45um. Membrane materials include: RC, nylon, PVDF, PTFE, etc. It is important for customers to choose the right membrane.

Aijiren has always insisted on using high-quality glass, because only the quality of the glass is high enough to be compatible with more samples and more convenient for customers to experiment. Therefore, Aijiren decided on borosilicate glass after various comparisons. This glass is not only resistant to high temperature and corrosion It is also inert and not easily broken, which is very suitable for large-capacity 60ml sample storage vial.

  The 11mm snap vial is specially designed and produced to ensure that it is sealed and matched with Aijiren instruments without failure. Strictly monitor the standard operating procedures of the production process to meet the requirements of stable quality and full traceability.

Using these bottles for sample storage can reduce ion leaching while ensuring that the sample maintains a consistent pH during its lifetime. Thermo Scientific™ National™ and Thermo Scientific™ Chromacol™ sample storage screw-top bottles are made of high-quality 33 expanded borosilicate transparent (type 1, type A) glass or 51A amber (type 1, type B) glass. The storage bottle has a capacity range of 40 mL.

Aijiren’s Caps all come with Septa, and 9mm Cap is the most popular choice, because 9mm Cap with Vial are Aijiren’s hot-selling products. The screw Neck design ensures the consistency of the seal and the pattern, and the seal is good, and it is convenient for manual operation. The operation meets the needs of laboratory personnel, and the packaging of 100pcs meets the convenience of experimental use.

Headspace GC is a sample preparation method for determining volatile compounds in solid and liquid samples. Headspace sample vial is generally used for gas phase experiments.

Aijiren™ Reagent Bottles, also known as Media Bottles, are manufactured from high quality borosilicate 3.3 glass. With their superior chemical resistance, these bottles are ideal for storing reagents, culture media, biological fluids, and a variety of other aqueous and non-aqueous solutio

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

Aijiren’s syringe filters and vials reduce HPLC sample preparation time and the use of consumables, and the track-etched membrane is also essential for extruding liposomes for encapsulation and targeted drugs.

With the use of headspace vials, the whole experiment can be prepared for analysis in an efficient and accurate way. The essence of this experiment is that the volatile sample is heated and vaporized to form a gas in the top space of the headspace vial and then diffuses. Finally, the gas in the vial enters the gas phase detection.

The Lab 9mm 2ml Screw Top HPLC Autosampler Vial features a precision-engineered design, ensuring a secure and leak-proof seal. It is compatible with various autosamplers, making it a versatile choice for HPLC applications.