Lab Use 9mm 2ml HPLC Autosampler Vial for Supply

The 2ml 9mm HPLC Autosampler Vials also offers a variety of closures, including crimp/snap or threaded closures. Screw-type closures can also be of different sizes identified by the outer diameter of the vials. If you use an autosampler, choose the 2ml 9mm HPLC Autosampler Vials for your specific equipment brand. 2ml 9mm HPLC Autosampler Vials work with Aijiren autosamplers.

2mL Clear Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vial, the product material is of paramount importance.

The Lab Use 9mm 2ml HPLC Autosampler Vial for Supply is a specialized vial designed for high-performance liquid chromatography (HPLC) applications. With a 9mm thread size, these vials ensure a secure and leak-proof seal, preventing sample contamination and maintaining sample integrity during analysis.

The 9mm 1.5mL Autosampler Vial is a versatile vial designed for precision sample handling in laboratory settings. With a 9mm diameter, it offers a universal fit in most autosamplers, ensuring compatibility with various systems. The vial has a capacity of 1.5mL, providing ample space for storing and transporting small liquid samples with ease.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

The 1.5mL 9mm Short Threaded Sample Vial provides researchers with an effective solution for storing samples in a laboratory environment. It is made from premium plastic materials that reliably maintain sample integrity while producing accurate analytical results. Produced from inert borosilicate glass for chemical resistance and sample stability.

While most liquid chromatography autosamplers use 12 x 32 mm vials, the most common HPLC vials are 9 mm screw vials. 9 mm screw vials have openings that are large enough for easy pipetting, but the necks (and closures) are still compatible with most autosamplers in use today.

The staff in the picture is disassembling the assembled 9mm Screw Neck Cap with Septa. These are 9mm Screw Neck Closures randomly selected from different machines. Since Aijiren produces more machines, many samples need to be checked. Solution to check whether Septa and Cap are damaged, if they are not sturdy, Septa may fall off or fall off easily. Aijiren’s strict quality inspection guarantees the quality of the product.

The Lab 9mm 2ml Screw Top HPLC Autosampler Vial features a precision-engineered design, ensuring a secure and leak-proof seal. It is compatible with various autosamplers, making it a versatile choice for HPLC applications.

9-425 short thread vials with screw caps wholesale, the best supplier in China
Aijiren provides chromatography vials, caps, vial inserts, syringe filters for hplc, glass reagent bottles, etc
Suitable for most autosampler use in the market

High recovery vials offer precision vials made from low expansion borosilicate glass and designed with a unique interior bottom, solid glass vial of a Microliter-Vial with inner cone, allowing for maximum retrieval of contents by a syringe.  

Chromatography sample vial is a glass vial used by automatic samplers and headspace samplers such as liquid chromatography, gas chromatography, mass spectrometry, etc. for chromatographic automatic sampling. Its basic requirements are accurate volume, ability to withstand a certain pressure, good sealing performance, and no adsorption to samples.

High recovery Vials are manufactured from heavy wall, low extractable, borosilicate glass providing excellent chemical resistance and durability during packaging and transportation.

Caps with solid PE liners offer good chemical resistance and low moisture vapor transmission rate and is great for nail polish remover and higher concentration acids & alkalis. Good for non-oil products filled at room temperature. Because this lining system is paperless, your samples will not be contaminated with fiber or paper particles from the closure. Available in Phenolic caps.

These vials are manufactured with high precision and quality control standards to ensure consistent performance. They undergo rigorous processes to eliminate defects and ensure batch-to-batch uniformity. The use of high-quality materials and advanced manufacturing techniques guarantees reliable and reproducible results in HPLC analysis.

Aijiren offer innovative high recovery vials for comprehensive collection, automated handling and storage, with the subsequent maximum retrieval of high value samples. 1.5ml 9mm high Recovery Vials Reduce Residual Product Waste by 99%.

PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

Screw thread vials and caps provide low evaporation, reusability, less hand injury during manipulation than crimp seals and require no special tools. All screw threads vials and caps are differentiated by their thread finish as defined by the Glass Packaging Institute, GPI. For screw thread vials, a two part number is assigned. For example, 8-425 neck finish represents a vial with a diameter of 8 mm across the outside of the threads and a thread style of 425. Screw thread vials and caps are more expensive than crimp seals.

The 1.5mL Short Threaded Sample Vial provides researchers with an effective solution for storing samples in a laboratory environment. Autosampler vials are generally made of hydrolytic glass or borosilicate, with various specifications. Different vial mouth designs meet different actual needs.

Aijiren’s 2ml Glass Vials can be applied in a wide range of fields. Many projects that require chromatographic analysis need to use 2ml Glass Vials, such as environmental analysis, soil analysis, pharmaceutical analysis, food analysis, etc. The aim of Aijiren is to provide high-quality chromatographic consumables for customers of chromatography.

1.5 ml vials from Aijiren Technology, Inc with high quality and favorable price. Zhejiang Aijiren is a manufacturer of Laboratory consumables. We supply autosampler vials, septa and caps at factory price. 9mm Short Thread Vials ND9 can be used for GC and HPLC.

The steep conical High recovery interior bottom provides exceptional downward drainage while allowing maximum retrieval of contents by syringe. High recovery Vials are perfect for specialty pharma, biotech, pharmaceutical and diagnostics packaging applications.

Vial Closure Size: 9mm
Vial Volume (Metric) 1.5mL
Volume (Metric) Working 1.3mL
Material: Glass
Color: Amber
Height (Metric) 32mm
Outside Diameter (Metric) 12mm
Residual Volume: <4μL

These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative 9mm closures and 9mm screw top vials for consistent productivity on every separation.
Standard opening screw-thread vials are manufactured from borosilicate glass and have a maximum fill volume of 2 ml.