Lab Use 13mm 25mm 0.45 or 0.22um Hydrophobic or hydrophilic Syringe Filter

Hydrophilic PTFE syringe filters offer a choice for aqueous samples that are diluted with harsh chemicals. These filters can handle high-temperature liquids, excellent flow rates, low protein binding, and are compatible with most bases, acids and organic solvents.

Aijiren’s PVDF syringe filters are hydrophilic in nature and have strong chemical compatibility. They can bring precision to your research and ensure the highest level of performance. Our filter range is designed with female leur-Lock imports and male Leur-slip exports. In addition, these filters have better mechanical resistance and it can withstand high temperatures.

Sterile syringe filters are syringe-operated filters for the clarification of aqueous solutions (column eluate, tissue culture additives, HPLC samples, etc

Sample preparation for high-throughput Ultra High Performance Liquid Chromatography (UHPLC)/High Performance Liquid Chromatography (HPLC) analysis can be time consuming when using multiple consumables such as a syringe, syringe filter, sample vial, cap, and septum. Aijiren HPLC filters result in faster sample preparation than the normal syringe filter method.

This nylon membrane can be used for alkaline blotting and fixation, but if fixing methods such as baking and ultraviolet rays are used, higher nucleic acid detection sensitivity can be obtained. Since the nylon membrane is a hydrophilic membrane, it does not need to be immersed in ethanol, methanol and other solutions for activation. This product is only for scientific research by professionals, and must not be used for clinical diagnosis or treatment, or used for food or medicine, and must not be stored in ordinary residences. For your safety and health, please wear lab coats and disposable gloves for operation.

Syringe filter is a small, disposable device used for filtering liquids or gases.It consists of a plastic housing with a membrane filter at one end and a female luer lock or luer slip connection at the other end, which allows it to be attached to a syringe or other fluid delivery system.
Syringe filters are commonly used in laboratory and research settings to remove particles, microorganisms, or other impurities from samples before analysis or further processing. The membrane filter in a syringe filter acts as a barrier, allowing only the desired components of the sample to pass through while retaining any larger particles or contaminants.
The choice of membrane material depends on the nature of the sample and the substances to be filtered.

The PTFE syringe filter is a general-purpose filter, and it is also Aijiren’s higher-selling syringe filter. PTFE is inert to many aggressive solvents and strong acids and alkalis. These syringe filters can also be exposed to high temperatures and are an excellent choice for HPLC sample preparation. Aijiren offers PTFE syringe filters in a hydrophobic state.

PES syringe filter is hydrophilic in nature, and has low protein binding, high flow rate and excellent chemical stability. In addition, it also contributes to oxidation stability, high heat and low concentration of extractable elements.

Aijiren’s sterile syringe filter has a bidirectional diaphragm support and Luer lock inlet/outlet, which can be securely mounted on the syringe. The type and pore size of the membrane are printed on each filter for easy identification. All Aijiren syringe filters are 100% integrity tested and manufactured according to ISO 9002 standards. The sterile filter is sterilized by gamma radiation. They are proven to be pyrogen-free, non-cytotoxic, and are blister packs.

Aijiren’s PVDF syringe filter has hydrophilicity and good chemical compatibility. They can bring precision to your research and ensure the highest level of performance. Our filter series are designed with female Leur-lock inlet and male Leur-slip outlet. In addition, these filters have better mechanical resistance and can withstand high temperatures.

Filter sterilization, that is, removing microorganisms by physical means such as screening or filter material adsorption, is a commonly used method of sterilization. The filtration method is widely used, and some materials that need to be sterilized cannot be heated, such as many vitamin solutions. In addition to being used in the production of beverages and drugs, the air is often sterilized by filtration. When we usually do microbiology experiments, the sterilized container is usually plugged with cotton at the outlet, which is actually filtering to remove microorganisms in the air, so that there is no microbial contamination in the air entering the container.

Features of the syringe filter: Luer lock inlet provides a sealed syringe connection, with various filter types, porosities and diameters. Color coding is easy to identify. Rugged polypropylene shell. Can be autoclaved to 121℃ for 15 minutes. The quantity exceeds the minimum order quantity to save more.

13 mm Syringe Filters: For sample volumes <10 mL range; Ideal choice for most applications; Holdup (dead) volume is <15 ul; Female inlet luer lock; Maximum operation pressure <15 bar; Bubble point: Hydrophilic 2-3 bar; Hydrophobic 1-1.2 bar.

The hydrophobic PTFE membrane has extensive chemical compatibility and very low dissolution, and is currently the most chemically resistant membrane among all filter membranes. Aijiren’s innovative design allows the PTFE filter to achieve a perfect balance between the increase in effective filtration area and the decrease in sample retention volume. The filter can withstand higher operating pressures, effectively avoiding leakage.

MCE Syringe Filter is generally used to filter neutral or partial neutral aqueous solutions, and can be used as experimental sample clarification filtration, liquid chromatography injection filtration and so on. Not suitable for filtering organic solvents and strong acid and alkali solutions. This filter is for one-time use, filtering about 10 ml at a time (specifically, there is a big difference according to the impurities of the filtered liquid), and the filter membrane cannot be disassembled. 0.45¦Ìm can remove conventional impurities and some bacteria visible to the naked eye. Generally used in conjunction with the syringe.

Aijiren syringe filter membrane use method introduction: before inhaling the sample, suck about 1ml of air into the syringe, so as to minimize the liquid residue, suck the sample into the syringe, invert the syringe and clear all the residues on the top Clean, connect the needle filter to the syringe, tighten it gently to ensure a good seal, filter the sample in the syringe and inject it into the sample bottle, and then follow the steps to maximize the recovery rate, remove the filter, and suck air into the syringe, Reconnect the filter head and eject all residual samples.

Customers can use sterile syringe filters to filter out particles and contamination in the fluid. Filtration requires a 0.2¦Ìm pore size to produce a sterile filtrate. The volume of the solution to be filtered varies from a few milliliters to several liters. Typical fluids may include serum-containing media, buffers, biological or protein samples, reagents, or other fluids, and need to be free of particulates or microbial contamination.

Among the many medium types of Syringe Filters produced by Aijiren, Polypropylene Syringe Filter is a special one. Because Polypropylene is often used to make the shell of Syringe Filter, there are fewer types of membranes made of Polypropylene. Aijiren finally decided to use this material to produce Syringe Filter after studying the production materials of many different manufacturers and the usage of different customers.

Aijiren syringe filter is a fast, convenient and reliable filter tool, usually used in the laboratory. Since they do not require membrane replacement and filter cleaning, complicated and time-consuming preparations are eliminated. It is widely used for sample prefiltration, particle removal, aseptic filtration of liquids and gases.

Your benefits when using Aijiren syringe filters£ºDifferent membrane types to meet multiple filtration needs. Low content of extractable compounds. Fast flow geometry for easy filtration. Low hold-up volume for maximum filtrate recovery. HPLC certified

Membrane: HPLC-certified PVDF
Use with: Alcohols, weak acids, proteins, peptides and other biomolecules
Don¡¯t use with: ?Some strong acids, bases, esters, ethers or ketones.?
Sterilization: Syringe filters can be sterilized by autoclave at 125¡ã for 15 minutes.?
Applications: General biological filtration, filtration of samples for high protein recovery.?

PTFE is a hydrophobic membrane that is chemically resistant to almost all solvents. It can be used with corrosive media, such as strong acids, alcohols, alkalis, and aromatics. The unit is readily available, allowing simple, fast and reliable HPLC or GC analysis of ultra-clean small-volume samples. PTFE filters can also be used to prevent moisture from passing through the vents.

1. The pore size of the needle-punched membrane is accurate, providing comprehensive protection for your instrument and chromatographic column
2. There is a clear label on the Nylon syringe filter to avoid confusion
3. The luer interface of the needle filter with lock can prevent the filter from flying out due to excessive pressure

The Lab Use Syringe Filter MCE is a versatile filtration tool designed for laboratory applications. Constructed with high-quality mixed cellulose ester (MCE) material, these syringe filters offer excellent chemical compatibility and durability. They effectively remove particulates, microorganisms, and impurities from liquid samples, ensuring enhanced sample purity for accurate analysis.

Nylon has excellent flow characteristics, extremely low extractable level and mechanical stability, and can provide the best combination of physical parameters to meet the most stringent analysis requirements of 13mm, 25mm and 33mm diameters. Nylon’s natural hydrophilicity, high protein binding capacity and high dirt adsorption capacity are natural advantages.