Lab seal glass vial 18mm GC headspace vial blue,white,red,Gray rubber septa

2ml snap autosampler vial is mainly used in lab chromatography analysis. This 2ml snap top autosampler vial has some features: 1.Extremely high inertness: The inertness of the sample vial can reduce the peak variability of the analyte. 2. Consistent performance: Each batch of the sample vial has consistent performance, which saves you more time for troubleshooting and re-running samples. You can also cooperate with Micro-insert when the sample margin is small.

Aijiren’s 4ml 13-425 Vial for HPLC is a popular product. Aijiren uses high-quality borosilicate glass to make Via, good PP plastic to make the lid, Silicone’s Septa, these excellent accessories combine to become Aijiren 4ml 13-425 screw vial.

The advantages of Syringe Filter: The low extractable membrane and shell ensure that no filter contaminants are added to your samples. Aijiren performs performance tests under actual HPLC conditions. The integrated 1mm borosilicate glass prefilter (30mm device) ensures higher confidence in samples with high solids content.

By using Aijiren syringe filters unwanted particles are removed which can otherwise cause contamination and clogging of sensitive instrumentation. So, filtering your samples leads to an increase of lifetime and less downtime of chromatographic columns and equipment, gives more consistent and reproducible results and thereby saves time and money.

2mL amber glass screw top autosempla vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID viale has an opening about 40% wider than the standard opening vial. Large openings reduce the risk of the autosampler needle bending during sampling. When selecting a 2mL amber glass screw top autosan pravisal, the material of the product is the most important.

Aijiren 2ml 9mm Screw HPLC Vial is very popular, because Screw threaded HPLC Vial is very convenient to use, whether it is for storing samples or for automatic injection, different sizes of caliber can also be applied to different brands and types of automatic injection The 2ml 9mm Screw HPLC Vial is the choice of most customers on the market.

Aijiren’s hottest 8-425 2ml Screw HPLC Vial with Cap have been introduced. Aijiren uses high-quality raw materials to make 8-425 2ml Screw Vial with Cap. Customer satisfaction and praise have made Aijiren one of the largest laboratory consumables producers in southern China. First, Aijiren will stick original intention to ensure the quality of 8-425 2ml vial.

All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

These syringe filters feature a user-friendly design, allowing for convenient and hassle-free filtration. They are compatible with standard luer lock syringes, enabling simple attachment and detachment. The filters come pre-sterilized and individually packaged, ensuring convenience and minimizing the risk of contamination.

Aijiren offers a variety of sizes and styles of containers, including the popular 40mL autosampler vials. Sample Storage Vial can be used as: Sampling and storage containers, sample vial compatible with autosampler, culture tube, TOC test, USP Method 643 test, Capture high-purity water offline, Store verification standards.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

GL45 reagent bottles often feature graduation markings on the side. These markings indicate volume measurements at regular intervals, allowing for accurate and precise dispensing or dilution of reagents. The graduation markings are typically in milliliters (ml) or liters (L), depending on the size of the bottle.

The storage vials are compatible with various laboratory storage methods, including refrigeration and freeze-drying. They can withstand a wide range of temperatures, allowing for long-term storage of samples under different conditions. The PTFE cap provides chemical resistance and ensures a tight seal, even during extreme temperature fluctuatio

Aijiren’s amber glass 4ml vial is often used to place light-sensitive chemical reagents or chemical powders. The scale of the amber glass 4ml vial can accurately show the level of the reagent. If the customer uses manual injection, it can also be accurately placed. Quantity of reagents.

Aijiren produces EPA Vial mainly for storing samples. There are many ways to store samples in the laboratory. Vial storage is one of them. As a manufacturer of chromatography consumables, Aijiren can use high-quality inert borosilicate glass to produce EPA Vial, which can help samples. Storage, EPA experimental analysis, is a good helper for customer laboratories.

Snap ring closures N11 should only be used in HPLC, as the punctual compacting pressure of the septum against the vial rim by the four pins in the cap does not achieve the same level of tightness as the evenly applied pressure through a screw thread or by crimping.

Aijiren’s septa can choose whether to have pre-slit or not. The pre-slit pattern is divided into one-shaped and cross-shaped. The septa with pre-slit is better to be pierced, especially for blunt automatic injection needles. , The cross star pre-slit septa can guide the automatic injection needle to accurately enter the vial to suck liquid, and will not deviate from the direction and cause the automatic injection needle to poke on the vial and cause the via to rupture.

Aijiren has its own bottle manufacturing plant. Aijiren strictly controls the manufacture of products and can ensure that the specifications of the 9mm screw neck vials in the same batch are exactly the same. Aijiren also offers customized services. You can add your own logo to Via and specify the color of the cap.

Snap Vials are manufactured from Type 1 borosilicate glass(Class A, 33 expansion borosilicate glass), available in clear or amber, or from Polypropylene. Snap Vials accept both an Aluminum Snap Seal as well as a Polyethylene Snap Cap. Excellent for short-term storage. Deactivation, MS Certification is also available.

Aijiren Headspace Vials feature rounded shoulders and bottoms, allowing for even heating and safer operation at higher pressures. The newly designed top provides a tighter seal with your septa. Vials are manufactured from Type I borosilicate glass and accept 20 mm aluminum seals.

2 ml snap top autosampler borosilicate glass vials are a specific type of vials commonly used in analytical laboratories and automated sample handling systems. They are designed for convenient and secure sealing, as well as compatibility with autosamplers for efficient sample handling.

The 24mm Screw Cap produced by Aijiren is often paired with 24mm Sample Storage Vial. This type of Vial is used to store samples and sometimes used in autosamplers. For example, 40ml Vial is often called EPA Vial, and the center hole on the Cap is here. It will be useful in time, the sampling tool can easily pierce through the septa for sampling without causing sample contamination.