Lab GL45 Reagent Bottle for Analysis

With a large enough change in temperature, the neck of the bottle can actually crack if it shrinks too tight around the stopper. Additionally, if hot liquid is poured in the bottle, the liquid will form an air-tight seal between the stopper and bottle and as the liquid and steam in the bottle cool and shrink, the stopper will be pulled down into the bottle neck.? This is the same principle that makes the center of a canning jar lid pop down until the seal is released.

GL45 reagent bottles often feature graduation markings on the side. These markings indicate volume measurements at regular intervals, allowing for accurate and precise dispensing or dilution of reagents. The graduation markings are typically in milliliters (ml) or liters (L), depending on the size of the bottle.

All Aijiren bottles have permanent white enamel scales for volume measurement; white identification boxes for marking or coding.
All Aijiren media bottles include non-drip sealing rings and standard blue polypropylene (GL45) sealing caps.

Constructed from borosilicate glass or soda-lime glass, reagent bottles feature stoppers or caps, which protect the contents from spilling or outside environmental contamination. Reagent bottles are excellent for storing powders and liquids.

Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, plastic, borosilicate or related substances, and topped by special caps or stoppers. They are intended to contain chemicals in liquid or powder form for laboratories and stored in cabinets or on shelves.
Vials and closures listed in this section are designed, engineered, and manufactured for optimum performance with HPLC and LC/MS applications. A great deal of energy, money, and time can be spent on sample preparation. The last thing you need is for a sample vial to contribute to contamination resulting in complicated data interpretation or complete reanalysis. By using certified vials that are nearly contaminant free, you can reduce the risk significantly by using vial products made specifically for these applications.

Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, plastic, borosilicate or related substances, and topped by special caps or stoppers. They are intended to contain chemicals in liquid or powder form for laboratories and stored in cabinets or on shelves.

Discover top-quality GL80 Wide Mouth Lab Glass Media Storage Bottles, 250ml, from a reliable supplier. Secure your lab’s media storage needs efficiently!

The reagent bottles are made of durable materials, such as borosilicate glass, offering excellent chemical resistance and long-term durability. The clear glass construction allows for easy visibility and monitoring of the reagent level. The GL45 screw cap provides convenient sealing and unsealing of the bottle, facilitating easy access to the reagent.

500ml reagent bottle refers to a type of laboratory container specifically designed for holding chemical reagents. It has a capacity of 500 milliliters, which is equivalent to half a liter or approximately 16.9 fluid ounces. Reagent bottles are typically made of glass or plastic and have a narrow neck with a screw cap or stopper to secure the contents and prevent spillage or contamination.

Reagent bottle, also known as culture medium bottle or scale bottle, is a container made of glass, borosilicate or related substances, with a special cover on the top. They are designed to contain chemicals in the form of liquid or powder for laboratory use and are stored on cabinets or shelves. Some reagent bottles are amber (photochemical), brown or red to protect photosensitive compounds from visible, ultraviolet and infrared radiation, which may change them; Bottles are called “graded” when they are marked on the side to indicate the approximate (usually 10% error) amount of liquid at a given level in the container. Reagent bottle is a kind of laboratory glassware.

This Reagent Bottle is made from borosilicate glass and is great for containing liquids and powders. Featuring a white wadded screw cap, it ensures that chemicals are safely stored on shelves or in a cabinet. This bottle has a 100ml capacity and is ideal for use in the science classroom or laboratory.

A low coefficient of thermal expansion (3.3), provides temperature resistance that is far superior to that of standard lab glass (or soda lime glass). Aijiren glass can withstand temperatures from -70 to 500°C, permitting repeated use in freezers, microwaves, autoclaves and dry heat sterilization chambers.

The glass of the reagent bottle has a low thermal expansion coefficient and can be autoclaved repeatedly (resistance to 140¡ãC). With scale and white enamel marking area, it is sturdy and durable. Comply with ISO GL 45 screw standard, compatible with ISO R115 and DIN 168 standards. Polypropylene (PP) external thread cap with O-shaped anti-drip ring, replaceable.

Reagent Bottle has low thermal expansion coefficient, can be sterilized by high temperature and high pressure (resistance to 140¡ãC), with scale, white enamel marking area, durable. Strong chemical resistance, no precipitation, low permeability. Highly polished surface, not easy to leave residue, easy to clean.

The reagent bottle produced by Aijiren has a low thermal expansion coefficient (3.3), which provides far better heat resistance than standard laboratory glass (or soda lime glass). Aijiren glass can withstand temperatures from -70 to 500°C, so it can be reused in freezers, microwave ovens, autoclaves and dry heat sterilizers.

All Aijiren reagent bottles have a permanent white enamel scale for volume measurement; with a white identification box for marking or coding. Includes anti-drip sealing ring and standard blue polypropylene (GL45) sealing cap.