Lab chromatography Borosilicate Glass Cheap HPLC Autosampler sample Vials price

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

Suitable for 11mm 2ml Crimp Neck Vials & 20mm Headspace GC Vials
Caps Material: Aluminum
Use Together with PTFE/Silicone Septa or Rubber Stopper
Color: Metal Silver
Vial Septa & Rubber Stopper and Crimpers are also Provided

The 2ml snap HPLC vial is made of type 1 borosilicate glass. Compared to 9mm screw vials, this 2ml snap hplc vial opening is a wider opening. Therefore, the 2ml snap top HPLC vial is easy to fill and increases the target area of the autosampler needle. This means that 2ml snap-top HPLC vials can protect needles.

The 2ml snap-top HPLC vial size is 11.6x32mm and is compatible with most autosamplers such as Aijiren. 2ml HPLC vials are available in amber and transparent colors. The bottom of the vial is flat. It is convenient to put. Aijiren offers 2ml snap-top HPLC vials and pads at wholesale prices.

All Aijiren vials are ideal for autosamplers and offer excellent chemical compatibility and ultra-cleanliness. Crimp Top Sample Vials are the most commonly used gas sampling vials on the market today. Sample vials with a capacity of 2ml, particularly suitable for laboratory use. At the same time, some vial bottoms are designed at the bottom of the bay, so the bottom is flat and compatible with automatic sampling equipment.

9mm thread screw neck vial, 32×11.6mm, transparent / amber PP, with graduation line, slightly concave shaped bottom
Preassembled cap and septafor 9mm thread screw PP cap, blue, centrel hole, PTFE/Silicone 9x1mm

These caps form an exceptionally tight seal and offer a good chemical barrier. This liner molds itself around the sealing areas of the finish as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, binding and backing off. Great for everything from liquids, to soaps, to macro-invertebrates.

2ml UPLC (Ultra-Performance Liquid Chromatography) is a high-pressure liquid chromatography technique used for separating and analyzing chemical compounds. When working with UPLC, it’s important to choose appropriate vials and caps to ensure sample integrity and compatibility with the system.

2ml crimp top vial from Aijiren is made of high-quality borosilicate hydrochloric acid glass, which can effectively prevent chemical substances from reacting with Vial to affect the results of the experiment. The glass of Vial has two colors, Clear and Amber, and customers can put it according to the claim The characteristics of the samples are selected.

2ml Amber Snap Autosampler Vial is mainly used in lab chromatography analysis. This 2ml Amber Snap Autosampler Vial has some features: 1.Extremely high inertness: The inertness of the sample vial can reduce the peak variability of the analyte. 2. Consistent performance: Each batch of the sample vial has consistent performance, which saves you more time for troubleshooting and re-running samples.

The Aijiren 8-425 screw cap and vial are suitable for waters and other rotating or robotic arm samplers. The specifications for the 8-425 HPLC sample vial are 12 x 32 mm. The opening of the 8-425 HPLC sample vial is 40% larger than the standard narrow opening vial, preventing syringe problems. Accurately handle bottlenecks and enable the mechanical arm to operate efficiently. The special screw design ensures a consistent seal.

1.5ml 9mm Screw Neck Vial for automatic samplers is made of low metal type 33 and 51 COE borate glass to prevent sample instability or leaching. By selecting the cap and pad, we provide the best sealing solution for the sample.

All Aijiren HPLC vials are ideal for autosamplers and offer excellent chemical compatibility and ultra-cleanliness. 2ml Crimp HPLC Vial with Cap are the most commonly used gas sampling vials on the market today. Aijiren 2ml Crimp HPLC Vials are manufactured from Type 1 borosilicate glass, available in clear or amber. Excellent for long term storage. 2ml volume sample vial especially suitable for laboratory use. At the same time, some 2ml Crimp HPLC Vial bottoms are designed at the bottom, so they have a flat bottom and are compatible with automatic sampling devices.

The 8-425 Autosampler Vial provided by Aijiren can choose Caps with or without a center opening, an autosampler with a center opening for easy sampling, and an HPLC Vials without a center opening for storing samples. Sapmle not easy to damage and volatilize.

The Aijiren 2ml crimp autosampler vial requires an 11mm crimp finish and requires an aluminum seal closure. Crimping aluminum caps are superior seals than screw caps and snap caps. In addition, crimp caps are resistant to high temperatures. However, a 2ml crimp autosample vial requires tools to seal the vials. This can increase costs. Aijiren is a 2ml crimp top autosample vial manufacturer. If you are buying a 2ml crimp top autosampler vial, you can get it from Aijiren at wholesale prices. Welcome to contact us.

2ml clear crimp top hplc autosampler vial is made of borosilicate glass. Comparing with 2ml amber crimp headspace vial, the 2ml clear crimp top hplc autosampler vial should be made by special process. The appearance of a clear and transparent 2ml crimp top sample hplc vial has attracted widespread attention. 2ml clear crimp top hplc autosampler vial is made by adding UV-absorbed metal oxides to the glass, while using the complementary effect of color, and then adding certain metals or their oxides to fade the colored glass. So in theory, the 2ml clear crimp top HPLC autosampler vial is a little expensive than Amber autosampler vial.

9mm screw thread caps, septa, and vials are designed especially for use with Aijiren’s and other rotating or robotic are samplers
2ml 12*32mm clear borosilicate glass vial,with a write-in patch; high quality polypropylene caps, ptfe / silicone septa can be pre-slit to easy needle penetration

9mm Blue Plastic Screw Caps is suitable for: 9mm Short Thread HPLC Vials
Caps Material: polypropylene, size: 11.5*6mm, inner diameter: 9mm, with 6mm Centre Hole or Closed-Top
Color: usually blue, other colors are also provided, such as red, black, yellow, etc
The Septa are PTFE / silicone, size: 9*1mm, the sapta could be pre-slit

2 ml borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample storage and analysis.Borosilicate glass is preferred in HPLC because it offers excellent chemical resistance and thermal stability, making it suitable for handling a wide range of solvents and temperature conditions.When working with water samples in HPLC, borosilicate glass vials are a suitable choice due to their resistance to water and other polar solvents.

Amber Borosilicate Glass
ND9mm Screw Neck Vial
11.6*32mm
With Writing Spot
9mm Blue Short Screw PP Cap
with 6mm Centre Hole
Pre-slit / non-slit PTFE Silicone Septa
Septa Size: 9*1mm

Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum.
8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass , And attached with a writable label for sample identification.
The vial cap is made of high-quality polypropylene, with precise manufacturing tolerances and a controllable manufacturing environment. The gasket is made of the highest quality PTFE/silicone to ensure the high efficiency of the function.

PTFE (polytetrafluoroethylene) silicon vials, also known as PTFE-lined silicon vials, are specialized containers commonly used in pharmaceutical and laboratory settings. These vials are designed to provide a high level of chemical resistance and inertness, making them suitable for storing and transporting sensitive or reactive substances.TFE silicon vials are commonly used for storing and transporting pharmaceutical drugs, particularly those that are sensitive to interactions with container materials.

Aijiren’s Snap Top Vial is suitable for most Autosamplers on the market, especially Waters’ Autosampler. If you are using Waters’ autosampler, you can consider purchasing Aijiren’s Snap Top Vial for use. The Cap of Snap Top Vial has a center hole to facilitate the automatic injection needle to take samples.

11mm Snap Top Closures are made of PP. The translucent Cap design allows users to see the fixed card slot. The inside of the Snap Cap has 4 protrusions for fixing in the lateral groove of the Vial Neck.

Autosampler borosilicate glass vials are specifically designed for use in autosamplers, which are automated instruments used in high-performance liquid chromatography (HPLC) and other analytical techniques. These vials are constructed from borosilicate glass, known for its excellent chemical resistance and thermal stability.hen selecting autosampler borosilicate glass vials, it is essential to consider factors such as vial size, closure compatibility, and the specific requirements of your autosampler instrument.

Aijiren has been engaged in the production of 8-425 HPLC Vial with Caps for more than ten years, we have absolutely rich experience and familiar processes to produce 8-425 HPLC Vial with cap, and we can guarantee the high quality of 8-425 HPLC Vial with Cap produced by Aijiren with reasonable price.

• Widely used in HPLC applications, universally usable vials for almost autosamplers, include the one with robotic handing.
• Snap vials can be closed with either snap caps or crimp caps.
• Snap caps can be easy as push-on, pull-off by hand.
• Clear glass vials–made from USP Type I, Class A, 33Borosilicate Expansion glass
• Amber glass vials—made from USP Type 1 Class B, 51Borosilicate Glass.