lab chromatography analysis autosampler Vial 2ml Clear Crimp Neck Vial

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

Use Aijiren 11 mm Glass Crimp Top Vials with aluminum crimp seal closures. These high-quality 11 mm glass vials are 2 mL, 12 x 32 mm and fit most brands of autosamplers. Made of superior quality 33 expansion borosilicate clear (Type 1, Class A), they meet all requirements of US, EU, JPN Pharmacopia. Choose from Aijiren brands.

Vial Closure Size: 9mm
Vial Volume (Metric) 1.5mL
Volume (Metric) Working 1.3mL
Material: Glass
Color: Amber
Height (Metric) 32mm
Outside Diameter (Metric) 12mm
Residual Volume: <4μL

The Aijiren Crimp top sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

9mm screw autosampler vial is widely used in laboratory chromatography analysis. Aijiren as one of largest chromatography consumable supplier, supplies 9mm screw HPLC vial in wholesale price. This 9mm screw vial package can reduce screw vial mouth touch to prevent contamination of sample. At the same time, the package box can be used as a vial rock, it is save the cost. Welcome to inquiry us about chromatography consumable.

2ml Amber Snap Autosampler Vial is mainly used in lab chromatography analysis. This 2ml Amber Snap Autosampler Vial has some features: 1.Extremely high inertness: The inertness of the sample vial can reduce the peak variability of the analyte. 2. Consistent performance: Each batch of the sample vial has consistent performance, which saves you more time for troubleshooting and re-running samples.

9mm standard 2ml short threaded sample vial(2ml autosampler vial), 2ml, 12×32mm, neck diameter 9mm; red PTFE/white silicone vial gasket, blue perforated polypropylene (PP) vial cap, sample vial has Transparent, amber, transparent with scale writing, and amber with scale writing are available for selection, suitable for various models of autosamplers such as Aijiren, Waters, Varian and Shimadzu.

The 9mm screw neck vial is the 9mm screw neck vial, which has the highest sales volume among Aijiren’s HPLC vials, because it can be used with most autosamplers on the market. In addition, the 9mm screw neck vial has a wide mouth and is convenient for automatic injection. Needle for pulling samples.

2ml crimp top vial from Aijiren is made of high-quality borosilicate hydrochloric acid glass, which can effectively prevent chemical substances from reacting with Vial to affect the results of the experiment. The glass of Vial has two colors, Clear and Amber, and customers can put it according to the claim The characteristics of the samples are selected.

“Aijiren Vials manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B, borosilicate glass
Aijiren Vials have a standard graduated write-on patch for easy filling and identification
Snap caps used with the Aijiren Vial system are a convenient alternative to aluminum seals
Snap caps or aluminum seals ensure a secure seal for samples”

Caps are made of high quality polyproylene to exact manufacturing tolerances and lined in a controlled manufacturing environment, Cap colors are available in black only, Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration.

All Aijiren HPLC vials are ideal for autosamplers and offer excellent chemical compatibility and ultra-cleanliness. 2ml Crimp HPLC Vial with Cap are the most commonly used gas sampling vials on the market today. Aijiren 2ml Crimp HPLC Vials are manufactured from Type 1 borosilicate glass, available in clear or amber. Excellent for long term storage. 2ml volume sample vial especially suitable for laboratory use. At the same time, some 2ml Crimp HPLC Vial bottoms are designed at the bottom, so they have a flat bottom and are compatible with automatic sampling devices.

Aijiren Crimp Top vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, it has a flat bottoming function and compatibility with automatic sampling equipment.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

Aijiren focus on improving the safety and integrity of our samples. Aijiren provide innovative 10mm thread caps and 10mm 2ml Hplc Screw Vials to ensure consistent productivity in all separation processes. These vials are the best choice for the latest autosampler. Standard open screw vials are made of borosilicate glass with a maximum filling volume of 2ml.

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Glass vials are available in 2 ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

Clear Glass Screw Thread Vials are 2mL, 12x32mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time.

The 2ml snap autosampler vial is often used in conjunction with the automatic sampler. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass with a writable label for sample identification.

2ml Snap Top HPLC Vial is made of Type 1 borosilicate glass. Comparing with 9mm screw vial, this 2ml Snap Top HPLC Vial mouth is wider opening. So 2ml Snap Top HPLC Vial is easier to fill and provides a larger target area for the autosampler needle. That means, the 2ml Snap Top HPLC Vial can protect the needle.

The crimp vials produced by Aijiren are made of transparent or amber type 1 borosilicate glass or polypropylene. Requires crimper and lid opener. Very suitable for long-term storage. Deactivation and MS authentication can also be used.

All Aijiren vials are very suitable for autosamplers and have good chemical compatibility and ultra-cleanliness. The crimp top sample bottle is currently the most commonly used gas sampling bottle on the market. The sample bottle with a volume of 2ml is especially suitable for laboratory use. At the same time, the bottom of some sample bottles is designed with a round bottom, so it has a flat bottom function and is compatible with automatic sampling equipment.

The 2ML HPLC Crimp Top Vial is very suitable for HPLC analysis, because it has good sealing properties and guarantees the same quality of samples. Crimp Top Vial should be used with Crimper and Decrimper. Crimp Top Vial of different calibers needs to be used with different Crimper and Decrimper. Aijiren provides high-quality Crimp Top Vial and Crimper&Decrimper, hoping to provide you with some convenience.

2ml Autosampler HPLC Screw glass vials are small containers used in high-performance liquid chromatography (HPLC) analysis. They are designed specifically for use in autosamplers, which are instruments used to inject samples into the HPLC system automatically.
These vials are made of high-quality glass that is resistant to the solvents and chemicals commonly used in HPLC analysis. The vials have a capacity of 5 milliliters, which is the maximum volume of sample they can hold. The vials are typically clear or amber in color, with clear vials allowing for visual inspection of the sample, while amber vials provide protection against light-sensitive samples.

Material: Borosilicate glass
Finish Type: Screw Neck
Color: Clear / amber
Size: 11.6*32mm
Cap: Black Polypropylene Cap
Closed-top or with 5.5mm center hole
PTFE/silicone Septa
with pre-slit

The Aijiren 2ml crimp autosampler vial requires an 11mm crimp finish and requires an aluminum seal closure. Crimping aluminum caps are superior seals than screw caps and snap caps. In addition, crimp caps are resistant to high temperatures. However, a 2ml crimp autosample vial requires tools to seal the vials. This can increase costs. Aijiren is a 2ml crimp top autosample vial manufacturer. If you are buying a 2ml crimp top autosampler vial, you can get it from Aijiren at wholesale prices. Welcome to contact us.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.