lab 11mm crimp top hplc vials for analysis equipment with aluminum cap

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process

9mm Blue Plastic Screw Caps is suitable for: 9mm Short Thread HPLC Vials
Caps Material: polypropylene, size: 11.5*6mm, inner diameter: 9mm, with 6mm Centre Hole or Closed-Top
Color: usually blue, other colors are also provided, such as red, black, yellow, etc
The Septa are PTFE / silicone, size: 9*1mm, the sapta could be pre-slit

The 2ml snap HPLC vial is made of type 1 borosilicate glass. Compared to 9mm screw vials, this 2ml snap hplc vial opening is a wider opening. Therefore, the 2ml snap top HPLC vial is easy to fill and increases the target area of the autosampler needle. This means that 2ml snap-top HPLC vials can protect needles.

The 2ml snap-top HPLC vial size is 11.6x32mm and is compatible with most autosamplers such as Aijiren. 2ml HPLC vials are available in amber and transparent colors. The bottom of the vial is flat. It is convenient to put. Aijiren offers 2ml snap-top HPLC vials and pads at wholesale prices.

1.5ml/2ml 8-425 autosampler vial (Shimadzu chromatography sample vial) is provided by Zhejiang Aijiren Rechnology Co., Ltd., instead of imported Shimadzu sample bottle, standard GC, HPLC sample bottle, 5MM caliber, 8-425 standard Threaded port can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum. The bottle cap is made of high-quality polypropylene, and the septum is manufactured with high-quality materials to ensure the efficiency of the function.
Applicable to: Beckman, Diane, Finnigen, Gilson, LKB, Thermoelectric Thermo, Varian Varian, Shimadzu and other autosamplers.

The opening of the vial produced by Aijiren is 40% larger than the standard opening aluminum sealed bottle
It is made of transparent Class 1 Class A or Amber, Class 1 Class B borosilicate glass
Sample vials provide standard progressive pasteable patches for easy filling and identification

Aijiren’s 9mm hplc vials are very suitable for Autosampler, especially Aijiren’s machines, because Aijiren’s 9mm hplc vials have a long neck to facilitate the grasping of instruments, and the bottom is flat and easy to place in the sampling area, and the accuracy of the thread is guaranteed Improved the sealing performance of 9mm hplc vials. In addition, Aijiren’s Cap and Septa have types that are convenient for Autosampler to puncture. Cap has a center hole, and Septa is very convenient for puncture.

2ml UPLC (Ultra-Performance Liquid Chromatography) glass vial refers to a specific type of vial used in analytical chemistry for storing and handling liquid samples in UPLC systems. UPLC is a high-pressure liquid chromatography technique that allows for fast and efficient separation of compounds in a liquid sample.
These vials are specifically designed to withstand the high pressures and temperatures often encountered in UPLC systems. They are typically equipped with a screw cap or a snap-on cap to provide a secure seal and prevent leakage or contamination of the sample.

Aijiren’s 10-425 screw vial is made of borosilicate hydrochloric acid glass, which has the characteristics of high temperature resistance and corrosion resistance, 10-425 screw vial is very compatible with the automatic sampler with a mechanical arm.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Autosampler borosilicate glass vials are specifically designed for use in autosamplers, which are automated instruments used in high-performance liquid chromatography (HPLC) and other analytical techniques. These vials are constructed from borosilicate glass, known for its excellent chemical resistance and thermal stability.hen selecting autosampler borosilicate glass vials, it is essential to consider factors such as vial size, closure compatibility, and the specific requirements of your autosampler instrument.

All Aijiren vials are very suitable for autosamplers and have good chemical compatibility and ultra-cleanliness. The crimp top sample bottle is currently the most commonly used gas sampling bottle on the market. The sample bottle with a volume of 2ml is especially suitable for laboratory use. At the same time, the bottom of some sample bottles is designed with a round bottom, so it has a flat bottom function and is compatible with automatic sampling equipment.

2 ml snap HPLC 5.0 borosilicate glass vials are a specific type of vial designed for use in high-performance liquid chromatography (HPLC) applications. These vials are characterized by their snap cap closures, which provide a convenient and secure sealing mechanism.It’s also essential to select the appropriate vial size to accommodate your sample volume and ensure compatibility with your HPLC autosampler.

9-425 Screw Cap 2ml HPLC vial is a type of vial commonly used in High Performance Liquid Chromatography (HPLC) applications. It is designed to hold samples for analysis in HPLC systems.The vial has a capacity of 2ml, which refers to the maximum volume of liquid it can hold. The 9-425 designation indicates the thread size and type of the screw cap, which is compatible with specific autosampler systems.These vials are widely used in chromatography laboratories for the storage and analysis of liquid samples in HPLC systems.

2 ml borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample storage and analysis.Borosilicate glass is preferred in HPLC because it offers excellent chemical resistance and thermal stability, making it suitable for handling a wide range of solvents and temperature conditions.When working with water samples in HPLC, borosilicate glass vials are a suitable choice due to their resistance to water and other polar solvents.

Features:
1) 8mm screw vials can be used with all common autosamplers
2) Standard narrow neck design for GC and HPLC
3) 8mm wide opening that is easy to drill holes

There are three types of 2ml HPLC Vials produced by Aijiren, Screw, Snap and Crimp Top. These three types of Vials can be used for autosamplers, but different bottlenecks are used with different types of machines, but these three types of vials The maximum capacity is 2ml, and you can choose vias with label area on the bottle.

If the reagents you test are invaluable and the capacity of the 2ml vials is too large, you can use the Ajiren 8-425 2ml autosampler vial in different types of microinse inserts. There are three types of microinse inserts. 29* 5mm 150uL micro inserts, mandolin interior and polymer feet, 150uL conical bottom micro inserts and 250uL flat-bottom microinserts. All three micro inserts can be adapted to 8-425 2ml autosampler vials.

The 2ML HPLC Crimp Top Vial is very suitable for HPLC analysis, because it has good sealing properties and guarantees the same quality of samples. Crimp Top Vial should be used with Crimper and Decrimper. Crimp Top Vial of different calibers needs to be used with different Crimper and Decrimper. Aijiren provides high-quality Crimp Top Vial and Crimper&Decrimper, hoping to provide you with some convenience.

Material: Brosilicate Glass/1st hydrolytic class glass
Volume: 1.5-2.0ml
Dimension: 11.6x32mm
Neck: 9mm Screw neck
Color: Amber and Clear
Septa: Pre-Slit, PTFE/Silicone
OEM & ODM Custom Service

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

1.5ml/2mlSnap autosampler borosilicate glass vial refers to a type of vial commonly used in laboratory settings for sample storage and analysis.
Borosilicate glass is chosen for its excellent resistance to thermal shock, chemical durability, and low contamination potential.
The term “Snap autosampler” typically refers to an automated instrument used in analytical chemistry, specifically in chromatography.
It is designed to automatically inject samples into the chromatographic system for analysis.
The vials used with such autosamplers need to be compatible with the instrument’s design and specifications.

2ml lab autosampler vial is a small container typically used in laboratory settings to store and transport samples for analysis.
Autosampler vials are designed to be compatible with automatic sampling systems or instruments known as autosamplers.
The capacity of a 2ml autosampler vial refers to its volume, and it can hold up to 2 milliliters (2 ml) of liquid or sample.
These vials are commonly made of glass or high-quality plastic materials such as polypropylene or polymethylpentene (PMP).
The choice of material depends on the specific application and compatibility requirements.

2ml crimp hplc vials vary depending on the filling volume. Distinguish between a standard 2ml crimp hplc vial and a micro vial with a shape that reduces the volume or outer volume. Alternatively, of course, you can use inserts to reduce the capacity in the vial and create ideal conditions for removing samples.

The 2ml crimp hplc vial with insert is larger than the 9mm screw sample vial and has a wider mouth. The 2ml crimp hplc vial features an opening about 40% wider than the standard opening vial. Large openings reduce the risk of autosampler needle bending during sampling.

Glass Screw Vials ND9mm for HPLC, Clear & Amber, with /without Patch
High Recovery Glass Screw Vials ND9mm, Clear & Amber, with /without Patch
0.3ml Glass Screw Vial integrated with Micro-insert, Base Bonded, Clear & Amber, with /without Patch
PP Screw Vials ND9mm, Clear & Amber
0.3ml PP short Screw Micro Vials, Clear & Amber

10mm sample bottles are widely used in the pretreatment of samples analyzed by gas chromatography and liquid chromatography. With the development of testing technology and the improvement of testing standards, the quality requirements for sample bottles have also increased. The 10mm large opening of Aiji can effectively prevent the risk of injection needle deviation.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Aijiren focus on improving the safety and integrity of our samples. Aijiren provide innovative 9mm thread caps and 9mm 2ml Hplc Screw Vials to ensure consistent productivity in all separation processes. These vials are the best choice for the latest autosampler. Standard open screw vials are made of borosilicate glass with a maximum filling volume of 2ml.

Too much or too little resistance to the needle can damage the septum, damage the re-sealing, the needle may be clogged by the core ring of the septum material, or the autosampler may be damaged. The Used Aijiren silicone rubber/PTFE septum is designed to give moderate resistance to the autosampler needle during the injection process, so it penetrates correctly into the vial without damaging the septum or injection needle.

Snap Top 2ml HPLC Vials can accommodate 250uL Micro-inserts,The specifications of Micro-insert are 29*5.7mm, 31*5.7mm, and 31*6mm. You can choose Micro-insert according to your needs. This is more helpful for HPLC analysis of precious samples, which can save samples without causing waste.

1.5/2ml autosampler vial refers to a type of sample container commonly used in analytical chemistry and laboratory settings.
The vial has a total volume capacity of 1.5 to 2 milliliters (ml).
Autosampler vials are designed to be compatible with automated liquid handling systems, such as autosamplers, which are used to inject samples into analytical instruments for analysis.
The vial typically consists of a cylindrical glass or plastic body with a narrow opening at the top.
It is sealed with a cap or septum to prevent sample contamination and evaporation.