Kind Of Reagent Bottle

Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, plastic, borosilicate or related substances, and topped by special caps or stoppers. They are intended to contain chemicals in liquid or powder form for laboratories and stored in cabinets or on shelves.

Discover premium quality clear borosilicate reagent bottles with GL45 blue caps. Available in various sizes: 50ml, 100ml, 250ml, 1000ml, and 2000ml. Shop now!

The screw caps on these bottles are made of heat-resistant thermoplastic polyester and can be sterilized with hot air at temperatures up to 180°C, compared to 140°C for bottles with polypropylene screw caps.Bottles with thermoplastic polyester caps, Teflon sealing discs and pouring rings
Withstands hot air sterilization up to 180°C
PTFE sealing discs resist chemical attack
Made of high-temperature and chemical-resistant borosilicate glass

With their superior chemical resistance, these bottles are ideal for storing reagents, culture media, biological fluids and a variety of other aqueous and non-aqueous solutions.

Clear bottles are ideal for display purposes and range in size from 100ml to 1000ml, the larger sizes can be used to store preserved biological specimens in the laboratory. The larger sizes also make excellent terrariums or miniature aquariums.

Constructed from borosilicate glass or soda-lime glass, reagent bottles feature stoppers or caps, which protect the contents from spilling or outside environmental contamination. Reagent bottles are excellent for storing powders and liquids.

When pouring hot liquids into a reagent bottle or placing the bottle in the refrigerator, the lid should be propped open with a toothpick or other small object until the liquid and bottle are cool. Another way to seal the bottle while preventing the lid from sticking is to place a sheet of plastic wrap loosely over the bottle neck before pushing the stopper down.

With a large enough change in temperature, the neck of the bottle can actually crack if it shrinks too tight around the stopper. Additionally, if hot liquid is poured in the bottle, the liquid will form an air-tight seal between the stopper and bottle and as the liquid and steam in the bottle cool and shrink, the stopper will be pulled down into the bottle neck.? This is the same principle that makes the center of a canning jar lid pop down until the seal is released.

Bottles and screw caps can be autoclaved / sterilized. Made from borosilicate glass helps prevent changes in ph levels and maintain content purity. Non-slip coating allows for greater ease and stability when handling wet or dry. 45mm white polypropylene unlined screw cap comes attached to bottle to help maintain cleanliness. Pvc-based plastisol coats exterior of bottle retaining contents if bottle is accidentally broken.

Aijiren™ reusable reagent bottles are made of high-quality borosilicate 3.3 glass. These bottles have excellent chemical resistance and are ideal for storing reagents, culture media, biological fluids, and various other aqueous and non-aqueous solutions.

500ml reagent bottle refers to a type of laboratory container specifically designed for holding chemical reagents. It has a capacity of 500 milliliters, which is equivalent to half a liter or approximately 16.9 fluid ounces. Reagent bottles are typically made of glass or plastic and have a narrow neck with a screw cap or stopper to secure the contents and prevent spillage or contamination.

The reagent bottle, also called the culture medium bottle or graduated bottle, is a container made of glass, borosilicate or related substances and covered with a special cap or stopper. They are intended to be used in the laboratory for chemicals in liquid or powder form and are stored in cabinets or shelves.

Aijiren can reuse glass bottles with lids and use these glass bottles for various routine laboratory applications. Aijiren’s reusable glass bottle has a lid, a convenient opening, an enhanced scale and a polypropylene pouring ring. With clear (natural), non-drip, replaceable polypropylene casting ring. Chemical resistance, high temperature and high pressure resistance, no dripping, a variety of specifications can choose borosilicate 3.3 glass material