Hromatographic automatic injection ptfe/ Silicone pad 9-425 2ml

The PVDF Syringe Filter produced by Aijiren is made of high-quality raw materials. The filter membrane is very suitable for sample preparation and reagent filtration. Aijiren believes that the PVDF Syringe Filter can be integrated with water-based reagents, and the hydrophilicity ensures that the PVDF Syringe Filter can filter water-based reagents. success.

The glass media bottle is made of borosilicate glass or soda lime glass and equipped with a plug or cover to prevent the contents from overflowing or being polluted by the external environment. Reagent bottles are ideal for storing powders and liquids. Amber or red media bottles can protect photosensitive contents from ultraviolet, visible and infrared radiation.

Aijiren has been engaged in the production of chromatographic consumables for 20 years. The types of products produced by Aijiren include Autosampler Vial, Syringe Filter, COD Test Tube, Headspace Vial, Reagent Bottle, etc. These products need to be packaged and shipped after Aijiren is produced. This uses the packaging workshop in the picture.

Aijiren can merge septa and cap, and before the merger, the machine can automatically identify the front and back of septa, silicone and PTFE surface, choose to fix the PTFE side up into the Cap, fully automated production saves a lot of manpower, Aijiren Be able to invest more talents in quality inspection and product development.

Transparent crimp top headspace vial with aluminum crimp cap and ptfe silicone septum
volume: 10ml or 20ml, diameter: 20mm neck diameter

The 11mm 20mm hand crimper removes aluminum caps safely and quickly with a single grip. The adjustable crimp caps crimper provides an adjustable stop on the handle to ensure consistent tightening and loosening of the cap each time, and the depth of the crimps can be changed by adjusting the screws inside the metal crimp.

In the field of experimental consumables, glassware consumables account for 86%. Reagent bottles are widely used for reagent storage and transport, accounting for only 32% of the final glassware. 2ml HPLC vials are widely used in chromatography, accounting for 54% of glassware consumables. This shows that the demand for the 2ml HPLC vial market is very large.

The crimp vial produced by Aijiren has a standard 11.6x32mm shape and is compatible with 11mm aluminum sealing caps. The Aluminum Cap is 11mm in diameter and has a 5.5mm center hole, which is convenient for sampling with automatic injection needles. In addition, the Septa matched with crimp vial can also be pre-slit to facilitate the automatic injection needle to pierce the septa.

Headspace vials are common consumables generally used in gas phase experiments. Headspace samples are typically prepared in vials containing sample, diluting solvent, matrix modifier, and headspace.

If the weight, damage, surface inertness, and/or disposal costs of the glass vial are concerned, the vial manufactured from polypropylene is an alternative to consideration. The benefits of polypropylene materials include low extraction rates, compatibility with many solvents, ideal for working with proteins, ideal for ion chromatography applications, ideal for pH-sensitive sample storage, and eliminate the need for inserts during microsampling.

Aijiren’s 8-425 2ml Autosampler Vials is very popular. It is favored by our customers for its high quality and cheap price. Aijiren is a manufacturer of 8-425 2ml Vials, so we bring our customers to the factory price.Buy 8-425 vials,Choose Aijiren.

A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

The screw thread of 13-425 HPLC Vial produced by Aijiren ensures the tightness of the HPLC Vial and ensures that the sample is not volatile. The Screw thread is also the most convenient type in HPLC Vial.

“Thread glass sample borosilicate” appears to be an incomplete or unclear term. However, if you are referring to a borosilicate glass sample vial or container with a threaded neck, I can provide information about that.Borosilicate glass is a type of glass known for its high resistance to thermal shock, chemical durability, and low coefficient of expansion.It is commonly used in laboratory settings and is ideal for containing and storing various types of samples.

1.5ml/2ml 8-425 autosampler vial (Shimadzu chromatography sample vial) is provided by Zhejiang Aijiren Rechnology Co., Ltd., instead of imported Shimadzu sample bottle, standard GC, HPLC sample bottle, 5MM caliber, 8-425 standard Threaded port can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum. The bottle cap is made of high-quality polypropylene, and the septum is manufactured with high-quality materials to ensure the efficiency of the function.
Applicable to: Beckman, Diane, Finnigen, Gilson, LKB, Thermoelectric Thermo, Varian Varian, Shimadzu and other autosamplers.

The 2ml snap HPLC vial is made of type 1 borosilicate glass. Compared to 9mm screw vials, this 2ml snap hplc vial opening is a wider opening. Therefore, the 2ml snap top HPLC vial is easy to fill and increases the target area of the autosampler needle. This means that 2ml snap-top HPLC vials can protect needles.

The 2ml snap-top HPLC vial size is 11.6x32mm and is compatible with most autosamplers such as Aijiren. 2ml HPLC vials are available in amber and transparent colors. The bottom of the vial is flat. It is convenient to put. Aijiren offers 2ml snap-top HPLC vials and pads at wholesale prices.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial.

Due to their artificially reduced cap height screw caps don’t have a standardized thread design. Therefore, it is recommendable only to use vials and closures from one source of supply, in order to ensure a harmonious and tight matching of both components

The 9mm screw HPLC autosampler sample vial is made of colorless borosilicate glass or amber 1 B grade borosilicate glass, which is a high-quality raw material. Excellent high temperature and corrosion resistance. Aijiren has strict control over the production environment. Aijiren 9mm screw HPLC autosampler sample vials have won the trust of customers.

The neck finish allows the use of standard aluminum seals. Surface treatment eliminates the need for crimping or capping off. Designed for use in Aijiren and other autosamplers. Choose from clear or amber Type I borosilicate glass. The wide opening can accurately center the limited volume of the insert at the neck of the sample. A scaled marking point can be provided.

2ml snap autosampler is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass, and attach a writable label for sample identification.

The vial cap is made of high-quality polypropylene, and the septum is made of the highest-quality materials. The precise manufacturing tolerances and the controllable manufacturing environment ensure the high efficiency of product functions.

In this test a reagent blank is used instead of the usual water blank referred to in the general photometer operating instructions. The reagent blank is prepared by adding deionised or distilled water to the reagent tube and then digesting the tube in the same manner as for the water sample.
It is not necessary to prepare a reagent blank each time the test is carried out. The reagent blank tube may be prepared weekly and used repeatedly with all samples prepared from the same batch of reagent tubes. The reagent blank should be stored in the dark between uses.

Aijiren 8mm threaded top sample vials are designed to be easy to use, especially when using an autosampler system, so 8-425 vials are also called autosampler vials. And the vials are very compatible.

Aijiren’s 9mm Screw Cap is made of high-quality PP material, and the color can be customized according to customer needs. You can also choose whether to have a center hole. If you need to perform automatic sampling, it is recommended to use a Cap with a center hole to facilitate automatic injection needles sampling.