Hot Product 18mm PTFE, silicone, Butyl RUBBER SEPTA for Lab seal glass vial

Featuring rounded bottoms and a deep thread finish for an extra turn of security for those important jobs, these heavyweights are fully annealed for maximum strength.
The rounded bottom allows for the efficient transfer of heat and easier cleaning. 

Aijiren Clear 8-425 HPLC Sample Vial, Clear Type 1 Class A, Amber 8-425 HPLC Sample Vial is manufactured in Type 1 Class B Borosilicate Glass, sample identification, measurement values 0.5, 1.0 and 1.5 ml. Consistency between the vial and the true neck 6mm of the standard glass insert is always guaranteed.

The material of the headspace sample bottle produced by Aijiren is borosilicate glass with low extraction rate, which has low expansion rate, high temperature resistance, high strength, high hardness, high light transmittance and high chemical stability. The headspace sample bottle is suitable for headspace analysis of volatile solids and gases.

The Silicone/PTFE Septa produced by Aijiren uses high-quality raw materials and an exclusive compounding process. This process does not require any adhesives to compound Septa and Silicone to achieve no cracking, no falling off, and a perfect fit for autosampler vial and antosampler.

1.5ml/2ml 8-425 autosampler vial (Shimadzu chromatography sample vial) is provided by Zhejiang Aijiren Rechnology Co., Ltd., instead of imported Shimadzu sample bottle, standard GC, HPLC sample bottle, 5MM caliber, 8-425 standard Threaded port can be used for autosampler and sample storage.

0.3 ml clear glass micro insert fixed in 2ml glass vial. Conical base micro  insert vial can saving samples while during injection.  Wide opening top for better needle injection.

Syringe filter is a small, disposable device used for filtering liquids or gases.It consists of a plastic housing with a membrane filter at one end and a female luer lock or luer slip connection at the other end, which allows it to be attached to a syringe or other fluid delivery system.
Syringe filters are commonly used in laboratory and research settings to remove particles, microorganisms, or other impurities from samples before analysis or further processing. The membrane filter in a syringe filter acts as a barrier, allowing only the desired components of the sample to pass through while retaining any larger particles or contaminants.
The choice of membrane material depends on the nature of the sample and the substances to be filtered.

Headspace vials can withstand the higher temperatures and internal pressures required for volatile gas analysis. With very low metal content, extractables and leachables, they meet high standards to meet your regulatory requirements. These headspace vials are specification-certified for physical dimensions and autosampler compatibility.

• Widely used in HPLC applications, universally usable vials for almost autosamplers, include the one with robotic handing.
• Snap vials can be closed with either snap caps or crimp caps.
• Snap caps can be easy as push-on, pull-off by hand.
• Clear glass vials–made from USP Type I, Class A, 33Borosilicate Expansion glass
• Amber glass vials—made from USP Type 1 Class B, 51Borosilicate Glass.

Aijiren finds the right size filter in order to ensure that customers can filter the particles correctly. It is recommended that you choose the diameter of the filter carefully. Aijiren produces usually sizes of 13 mm and 25 mm. Each of them has a different ability to hold particles. According to the sample size, the appropriate filter diameter can be selected. For example, a diameter of 13 mm can be used for samples of 1-10 ml. Similarly, 25 mm PVDF syringe filters can be used for sample volumes of 10-100 ml. Their retention is less than 100 ml.

2ml autosampler vials 9mm for HPLC system with bonded septa caps. Including: 100pcs Clear/amber bottles 32×11.6mm made of borosilicate glass, 2ml lab vials 9-425 screw thread, Flat base Sample Vials; Made out of USP TYPE I Glass. With writing patch for pencil mark.

These vials are a good choice for the latest autosamplers. With an emphasis on improving sample security and integrity, we offer innovative 9mm closures and 9mm screw top vials for consistent productivity across all separations.
Standard opening screwed viars are manufactured from borosicate glass and the maximum filling volume is 2 ml.

The Hand Crimper and Hand Decrimper produced by Aijiren are designed to facilitate customers to seal and disassemble the Crimp Neck Vial. Since Crimp Neck Caps are usually made of metal, it is not easy to disassemble, so tools are needed. In the picture, Aijiren’s Hand Decrimper is very Convenient choice.

Aijiren Storage vial is an ideal device for general laboratory use and storage of diverse samples due to excellent sealability and chemical tolerance. Besides, chemically inert caps are a good choice for most chromatography and storage applications. Top grade PTFE or Silicone septa are adopted to ensure cleaning production and consistent quality of sample vials.

The 9mm screw cap is made from high-quality material, providing excellent durability and chemical resistance. Its precise threading allows for easy and efficient sealing, ensuring a reliable closure for HPLC vials. The septa, made of a specialized material, offers optimal inertness and compatibility with a wide range of samples, ensuring accurate and reproducible results in HPLC analysis.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

Vial rack is a laboratory tool designed to hold and organize vials or tubes. Vials are small containers used in scientific research, diagnostics, and other applications to store and transport liquids, powders, or other samples. Vial racks are typically made of plastic, metal, or a combination of both materials and come in various sizes and configurations to accommodate different types of vials.

It is worth noting that Aijiren’s production workshop is a dust-free workshop, but after packaging and transportation, Aijiren recommends that customers perform pre-cleaning treatment before using it. If customers need sterile Vial, they need to perform sterile treatment by themselves before using it.

Aijiren’s Crimp Top Vial has a standard 11.6x32mm shape and is compatible with 11mm aluminum sealing caps. The Aluminum Cap has a 5.5mm center hole to facilitate automatic sampling by the automatic sampling arm. Septa can also choose whether to pre-slit, which is convenient for automatic Sampling needle pierced Septa.

Type 1 borosilicate glass. Clear glass vials with 20mm crimp seal finish are designed to fit most headspace autosamplers. Flat bottom vials maximize heating efficiency when used with bottom. Round bottom vials are more easily handled by robotic arms that lift the vial from the tray.

Storage glassware manufactured in Type 1, Class A, 33 expansion borosilicate glass
Capacity ranges from 2mL to 60mL
Provide constant pH for duration of sample storage life
Chemically inert caps suitable for most chromatography and storage applications
Top grade PTFE/silicone septa used for cleanliness

The COD tube provided by Aijiren uses high-quality glass, which is extremely inert and will not react with reagents. Through Aijiren COD tube test, the time required for the measurement process is greatly shortened, especially for standard analysis and series measurement, which greatly reduces the workload.

Aijiren participated in Analytica China in Shanghai in 2020. At that time, Aijiren carefully designed the booth in order to promote the products, and went to Analytica China with full products and sincerity. This was to give customers more convenience and let the industry use it more. Those who know Aijiren, know Aijiren.