High Quality MCE Syringe Filter for Lab Use

The syringe filters are available in various pore sizes and membrane materials to accommodate different filtration requirements. They are suitable for a wide range of laboratory applications, including sample preparation, clarification, and sterilization. The filters provide reliable performance and consistent filtration results, contributing to accurate and reproducible data in analytical chemistry, microbiology, and other fields.

The EPA VOA vials feature a secure closure mechanism to maintain sample integrity and prevent sample leakage or contamination. The vials typically come with a screw cap equipped with a septum, ensuring a tight and leak-proof seal. This closure mechanism ensures the preservation of volatile organic compounds during storage and transportation.

The nylon membrane of the syringe filter should be compatible with the chemical characteristics of the sample. The nylon membrane should be compatible with various water-based and organic solvents. The membrane should also have high resistance to HPLC solvents and chemicals. The 0.45mm aperture ensures that you have enough capacity and throughput to process samples efficiently and quickly.

Feature and benefits: 0.2 ¦Ìm hydrophobic air filters are excellent industrial air filter media. Testable by water break through (WBT) test or bubble point testing.Passes USP Class VI biosafety tests for plastics. Manufactured in clean room facilities. Range of filtration areas from 4¨C2000 cm2 to support filtration volumes as small as one liter and as large as a large tank vessel

Aijiren disposable syringe filter devices are designed to provide fast and efficient filtration of aqueous and organic solutionsfrom small volumes up to 100 mL.

The hydrophobic PTFE syringe filter membrane is made of hydrophobic polytetrafluoroethylene. It filters organic solvents, aqueous solutions and gases that are chemically corrosive, and can withstand most strong acid and alkaline solutions. Product application: Used for the clarification and filtration of strong acids and alkalis, the filtration of high-temperature liquids and special chemical reagents, and the clarification and filtration of air or various gases.

Nylon membrane has high strong mechanical strength, chemical stability, can be tolerated by most organic solvents, extremely low in extractables, good thermal stability (up to 50¡ãC), natural hydrophilic and the majority of water solution filter characteristics. It more often applied to the common organic solvent HPLC mobile phase filtering.

Aijiren’s PVDF syringe filters are hydrophilic in nature and have strong chemical compatibility. They can bring precision to your research and ensure the highest level of performance. Our filter range is designed with female leur-Lock imports and male Leur-slip exports. In addition, these filters have better mechanical resistance and it can withstand high temperatures.

MCE features: relatively uniform pore size, high porosity, no media shedding, thin texture, low resistance, fast filtration rate, and minimal adsorption.
The main purpose of MCE: to filter out the particles and bacteria of liquid medicine, gas, oil, beverages, sprinkles, electronic instruments, etc., and can also be used for the detection of particles and bacteria.

These syringe filters feature a user-friendly design that allows for easy and efficient filtration. They are compatible with standard luer-lock syringes, providing a secure and leak-free connection. The nylon membrane has a small pore size, typically ranging from 0.2μm to 0.45μm, enabling efficient removal of contaminants while retaining the desired analytes. The filters provide high flow rates and low protein binding, making them suitable for a variety of sample types.

PTFE Syringe Filter is resistant to almost all corrosive chemicals, which makes PTFE syringe filters an ideal choice. However, the disadvantage of natural hydrophobic PTFE is that after many chemicals are diluted with water, the aqueous solution cannot pass through. Need to be wetted with water in advance.

The reinforcement ring can provide greater strength to the shell to prevent leakage and bursting (30mm product pressure is rated at 120 psi). The shell is made of solvent-resistant, low-extraction polypropylene resin, specifically selected for wide compatibility with common HPLC sample matrices. The solution can be filtered at temperatures up to 100¡ãC, which is convenient and easy to use.

Aijiren’s PVDF membrane (imported packaging, 6.6¡Á8.5cm, 0.2¦Ìm) is a pre-cut polyvinylidene fluoride (PVDF) imprinting membrane with a size of 6.6¡Á8.5cm and a pore size of 0.2¦Ìm. It is most commonly used for the transfer of protein from gel to membrane in immunoblot (Western blot), and can also be used for adsorption analysis, amino acid analysis, N-terminal protein sequencing, dot and slot blot detection, Glycoprotein color development and lipopolysaccharide analysis, etc.

13 mm Syringe Filters: For sample volumes <10 mL range; Ideal choice for most applications; Holdup (dead) volume is <15 ul; Female inlet luer lock; Maximum operation pressure <15 bar; Bubble point: Hydrophilic 2-3 bar; Hydrophobic 1-1.2 bar.

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. Therefore, samples and solvents must be pre-filtered to remove particulate contaminants and protect the instrument.

Aijiren’s syringe filters with nylon membranes are compatible with a wide range of solvents, making them ideal for fast filtration of most aqueous and organic solutions. Therefore, when a mixture of sample aqueous solution and organic solvent passes through nylon membrane, fine droplets of extractor solvent accumulate and are separated from the sample aqueous solution. Using this simple method, the total extraction time is only 3-4 minutes; It is environmentally friendly, has no centrifugal effect, provides a higher sample purification rate by filtering receptor phases, and filtering reagents ensures reduced impurities and protects the color column.

Nylon has excellent flow characteristics, extremely low extractable level and mechanical stability, and can provide the best combination of physical parameters to meet the most stringent analysis requirements of 13mm, 25mm and 33mm diameters. Nylon’s natural hydrophilicity, high protein binding capacity and high dirt adsorption capacity are natural advantages.

Syringe filter is a disposable device used in laboratory settings to filter small volumes of liquid samples. It is commonly utilized to remove particulate matter and microorganisms from solutions before analysis or to protect sensitive instruments from contamination.
Syringe filters consist of a plastic housing with a membrane filter at one end and a female luer lock or luer slip connection at the other end. The filter membrane is typically made of materials such as nylon, polyethersulfone (PES), polytetrafluoroethylene (PTFE), or cellulose acetate.

Polypropylene is compatible with acetone, ethyl acetate, methanol, isobutanol, methanol and methyl ethyl ketone. Polypropylene is incompatible with cyclohexane, ether, dichlorobenzene, pentane, methylene chloride and trichlorobenzene. It is recommended to use gas, disinfectant or autoclave to sterilize products made of polypropylene. The maximum operating temperature is 135¡ãC.

Our syringe filters are high quality, packaged and sold at fair competitive prices. They are available in most of the major membrane materials including nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF, and are available in 13mm, 17mm, 25mm and 30mm formats for virgin polypropylene housings.

Disposable syringe filters are widely used in labs for quick and efficient filtering, material purification or even sterilization for solutions <250mL, to avoid setting ups of Buchner filters or similar.

Aijiren sterile PES syringe filter
100% integrity test, individual packaging, gamma radiation
Diameter: 13mm, aperture: 0.45um, 100/pack
In line with ISO certification, quality is guaranteed
Applications: Preparation of tissue culture media, sterile filtration and clarification of biological fluids, probe solutions, protein and enzyme filtration, hybridization buffers, etc.

The MCE membrane offers exceptional retention capabilities, trapping particles and microorganisms as small as 0.22 μm in size. This fine filtration helps safeguard sensitive analytical instruments, HPLC systems, and other lab equipment from contamination, preserving their optimal performance and extending their lifespan.

Disposable syringe filter devices are designed to provide fast and efficient filtration, premium quality and economy. The membrane could be PTEF, PVDF, PES, Nylon, MES, PP, CA, and can be suitable for different situations.

Filter sterilization, that is, removing microorganisms by physical means such as screening or filter material adsorption, is a commonly used method of sterilization. The filtration method is widely used, and some materials that need to be sterilized cannot be heated, such as many vitamin solutions. In addition to being used in the production of beverages and drugs, the air is often sterilized by filtration. When we usually do microbiology experiments, the sterilized container is usually plugged with cotton at the outlet, which is actually filtering to remove microorganisms in the air, so that there is no microbial contamination in the air entering the container.