Green PP Syringe Filter for Sale

Sterile Syringe filters wholesale for hplc
membrane: ptfe, pvdf, mce, pes, ca, etc
Diameter: 25mm / 13mm, pore size: 0.22um, 0.45um

The Nylon Syringe Filter produced by Aijiren is mostly used for reagent filtration or sample preparation. Nylon Syringe Filter has different specifications. The filter membrane diameter is 13mm, 25mm and 33mm, which can be selected according to the capacity of the sample. Aijiren provides 0.22μm and 0.45. Two μm specifications are convenient for customers to choose. The Nylon Syringe Filter produced by Aijiren meets customers’ requirements and needs for product preparation.

Polypropylene is compatible with acetone, ethyl acetate, methanol, isobutanol, methanol and methyl ethyl ketone. Polypropylene is incompatible with cyclohexane, ether, dichlorobenzene, pentane, methylene chloride and trichlorobenzene. It is recommended to use gas, disinfectant or autoclave to sterilize products made of polypropylene. The maximum operating temperature is 135¡ãC.

A syringe filter (sometimes called a wheel filter for its wheel-like shape) is a single-use membrane based filter cartridge, to be attached with a syringe to remove impurities in liquid solutions. This pre-filtration step is vital in preventing damage to instruments (e.g. liquid chromatography, ICP, etc.).

Aijiren¡¯s PP syringe filter uses a hydrophobic polypropylene membrane, which has stable physical and chemical properties, good compatibility, low protein adsorption, and is suitable for filtration of aqueous solutions and most solvents. Commonly used to filter biological samples, solvents, deionized water and reduce biological load, the hydrophobic PP filter membrane is particularly good for gas filtration. The product was sterilized by dry heat at 121¡ãC for 15 minutes.

They are also very useful in the protection of vacuum pump pipelines and have the qualities of high absorption and retention capacity. Due to their advantages, these syringes can be used in laboratory situations as well as industrial applications.

Uniform aperture,Thin texture,Low flow resistance,High filtration speed,Little absorption,All items are quality tests for filter efficacy and housing integrity. The housing is pressure tested for use with up 75 psig (5.0 bar) of pressure.

Aijiren’s membrane materials are supplied by the best names in the industry and the ISO9000 certified manufacturing is carried out to the highest standards, in certified clean room conditions, using the latest manufacturing technology to ensure a high quality, consistent product. All the syringe filters are HPLC certified.

The reinforcement ring can provide greater strength to the shell to prevent leakage and bursting (30mm product pressure is rated at 120 psi). The shell is made of solvent-resistant, low-extraction polypropylene resin, specifically selected for wide compatibility with common HPLC sample matrices. The solution can be filtered at temperatures up to 100¡ãC, which is convenient and easy to use.

Syringe filter is a small, disposable device used for filtration purposes in laboratories and other scientific settings. It consists of a plastic housing with a membrane filter at one end and a female luer lock or male luer slip connection at the other end, allowing it to be attached to a syringe.
The purpose of a syringe filter is to remove impurities, particulates, or unwanted substances from a liquid sample before it is injected or analyzed. The membrane filter within the syringe filter acts as a barrier, selectively allowing only certain particles or molecules to pass through while retaining larger particles.

1. The pore size of the needle-punched membrane is accurate, providing comprehensive protection for your instrument and chromatographic column
2. There is a clear label on the Nylon syringe filter to avoid confusion
3. The luer interface of the needle filter with lock can prevent the filter from flying out due to excessive pressure

PES syringe filter is mainly used for filtering and sterilizing liquid samples of small volume samples such as a small amount of buffers, protein solutions, additives, various reagents or drugs, and removing particles. It is also the first choice for sterilization and filtration of small samples of HPLC and GC. method.

Sterile Syringe Filters
While the primary function of a syringe filter is to remove particulates from a liquid sample, you will select either a sterile or non-sterile filter, depending on the end application.
Sterile syringe filters are used to sterilize non-sterile solutions or clarify sterile solutions. Learn more about sterile filters by application.

Aijiren’s products enable pharmaceutical companies to increase productivity. Syringe filters and vials reduce HPLC sample preparation time and consumables usage, and track-etched and membranes are also vital to extruding liposomes for encasing and targeting drugs.

In the sample application of choosing the appropriate syringe filter and syringe, draw your sample into the syringe and place the filter on the syringe. If you are using a leur lock filter, make sure you have properly secured the filter into the syringe tip .Push a few drops through the filter with the syringe filter facing up and “top”. Place the filter in the overturned collection container and push the sample through the syringe filter by applying gentle positive pressure. The syringe filter to be cleared and the maximum To maximize sample throughput, remove the filter from the syringe and draw air into the syringe. Then reinstall the filter and push the plunger to force some air through the filter.

The syringe filters are available in various pore sizes and membrane materials to accommodate different filtration requirements. They are suitable for a wide range of laboratory applications, including sample preparation, clarification, and sterilization. The filters provide reliable performance and consistent filtration results, contributing to accurate and reproducible data in analytical chemistry, microbiology, and other fields.

13mm, 25mm 0.22um, 0.45um hydrophobic PVDF (polyvinylidene fluoride) membrane syringe filter is a filtration device commonly used in laboratory settings to remove particulates and microorganisms from fluids.
It’s important to note that specific details of hydrophobic PVDF membrane syringe filters, such as pore size, diameter, and filtration capacity, can vary between manufacturers and product lines.
Therefore, it’s recommended to consult the product specifications or contact the supplier for precise information about the syringe filters you are considering for your specific application.

The Non-sterile Disposable Syringe Filter is a versatile filtration device used in laboratories for sample preparation and clarification. It consists of a polypropylene housing with a membrane filter, providing efficient filtration of particulate matter and microorganisms. These syringe filters are available in various pore sizes and diameters to suit different filtration needs, and they come in non-sterile packaging.

PVDF syringe filters are made of hydrophilic PVDF membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes.

These syringe filters feature a user-friendly design that allows for easy and efficient filtration. They are compatible with standard luer-lock syringes, providing a secure and leak-free connection. The nylon membrane has a small pore size, typically ranging from 0.2μm to 0.45μm, enabling efficient removal of contaminants while retaining the desired analytes. The filters provide high flow rates and low protein binding, making them suitable for a variety of sample types.

PES syringe filter is hydrophilic in nature, and has low protein binding, high flow rate and excellent chemical stability. In addition, it also contributes to oxidation stability, high heat and low concentration of extractable elements.

The PTFE syringe filter is tritium-free and has a two-way membrane support and Luer lock inlet/outlet and a safe and suitable syringe. The membrane type and pore size are printed on each filter for easy identification. All Aijiren syringe filters are 100% integrity tested and comply with ISO 9002 standards. The sterilizing filter is sterilized with gamma rays. And detect no pyrogen, no cytotoxicity.

The 0.22um 0.45um Lab Use Reusable Syringe Filter With Printing finds application in diverse laboratory settings. It is suitable for pharmaceutical research, biotechnology, environmental analysis, food testing, and other scientific research fields.