Double-sided Silicone Septa for Cap

The Sample Cell Vial produced by Aijiren is often used for water quality testing. Its small size and flat design allow it to stand stably on a table or cabinet. Compared with the 16mm COD Test Tube, which is also used for water quality monitoring, it capacity is larger.

The COD Test Tube produced by Aijiren is often used in chemical oxygen demand testers. Since the chemical oxygen demand test is a test that requires strong corrosive reagents, Aijiren uses the most inert and stable glass to produce the COD Test Tube, which is produced by Aijiren. COD Test Tube meets customer requirements for oxygen demand testing.

Reagent bottle, also known as culture medium bottle or scale bottle, is a container made of glass, borosilicate or related substances, with a special cover on the top. They are designed to contain chemicals in the form of liquid or powder for laboratory use and are stored on cabinets or shelves. Some reagent bottles are amber (photochemical), brown or red to protect photosensitive compounds from visible, ultraviolet and infrared radiation, which may change them; Bottles are called “graded” when they are marked on the side to indicate the approximate (usually 10% error) amount of liquid at a given level in the container. Reagent bottle is a kind of laboratory glassware.

Clear Glass Screw Thread Vials are 2mL, 12x32mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time.

The snap-on sample vial is made of type 1 borosilicate glass (type A, 33 expanded borosilicate glass), transparent or amber, or made of polypropylene. The snap-on vial can accept either aluminum snap-on seals or polyethylene snap-on caps. Very suitable for short-term storage. You can also deactivate MS authentication.

The sterile syringe filter provided by Aijiren has a cellulose acetate or PES filter membrane. A sterile membrane with a pore size of 0.2um is an ideal material for sterilization and filtration, while a pore size of 0.45¦Ìm can be used for clarification. The sterile needle filter is sterilized by gamma radiation, which avoids the toxic residue caused by other sterilization methods

Finally, the gas in the vial enters the gas phase detection. Top space gas analysis with the help of a headspace vial helps automate quality control or sample selection. Using modern instruments, through highly reproducible samples, the entire experiment can be prepared for analysis in an accurate manner.

Syringe filter is a disposable filter unit designed to remove impurities from liquids or gases using a syringe as the fluid delivery system.
It consists of a plastic housing with an inlet and an outlet, and a filter membrane positioned between them.
The filter membrane is often made of materials such as polypropylene, polytetrafluoroethylene (PTFE), or nylon.
To use a syringe filter, the liquid or gas to be filtered is drawn into a syringe, and then the syringe is attached to the inlet of the syringe filter.

Efficiently hold and organize vials while using them or for storage. Save space by stacking the 50 or 100 plastic vial racks on top of each other. Economical and convenient storage for samples of your screw cap and crimp seal vials. Can be stacked when empty or full. Autoclavable, 120¡ã C.

Cellulose Acetate Syringe Filter Surfactant-free membrane for cleanliness in downstream applications, Filter type printed on the filter for ease of identification, Convenient, larger pack sizes,Gamma sterilised.

Reagent Bottles, also known as Media Bottles, are manufactured from high quality borosilicate 3.3 glass with a GL45 threaded cap. With their superior chemical resistance, these bottles are ideal for storing reagents, culture media, biological fluids, and a variety of other aqueous and non-aqueous solutions.

Cellulose acetate is a very low protein binding membrane that is ideal for aqueous based samples and biological samples. It is a lower protein binder than either polyethersulphone or PVDF membranes, but has a lower chemical resistance than regenerated cellulose (RC). CA is a strong membrane mechanically and hydrophilic.

Aijiren vials combine the robustness of a Glass vial with the benefits of a glass micro-insert. The glass micro-insert is firmly seated in the cone of the vial and its edges slightly exceed the rim of the vial, ensuring that the septum seals tightly to the glass.
Accurate centering of the insert ensures safe needle injection. Crystal clear Glass offers good transparency and chemical resistance.

The 2mL screw cap sample rack can effectively store sample bottles and can be stacked to save more space. The rack has an alphanumeric index function to easily identify sample bottles. The polypropylene vial holder is resistant to most solvents.

Aijiren has been producing 15-425 Screw Neck Storage Vial since 2009 and has been there for more than ten years.We welcome the purchase of cheap 15-425 Screw Neck Storage Vial, PP vials, chromatography vials and Syringe Filter. Find 15-425 Screw Neck Storage Vial with cap manufacturers and suppliers from China. We are a professional manufacturer of 15-425 Screw Neck Storage Vial.

The manual crimper is designed for laboratory use with a surface coating that provides good chemical resistance and is widely used for capping laboratory vials. The vial crimper is ideal for small volume crimping operations and sample preparation operations. It is safe, reliable, tight, smooth and has a good seal.

15-425 Screw storage vials are suitable for the packaging of various pharmaceutical intermediates, high value-added chemicals, chemical reagents, biological reagents, cosmetics, essences and oils, etc. It is suitable for long-term storage and transportation for products, and has excellent sealing performance.

IV250 vial insert
Conical Bottom
31*5.7mm
suit for 9mm, 10mm, 11mm vials

Aijiren is one of the largest 2ml 9mm sample vial with screw cap manufacturer in south of China, which supply 2ml 9mm screw HPLC vial in wholesale price. The screw 9mm HPLC sample vial meet or exceed OEM specifications to ensure autosampler compatibility. 2ml 9mm sample vial compatible with Perkinelmer.

Aijiren 8mm threaded top sample vials are designed to be easy to use, especially when using an autosampler system, so 8-425 vials are also called autosampler vials. And the vials are very compatible.