Diameter 13 mm 0.22 um Disposable Hydrophilic PVDF/PTEF/For Laboratory Use only Syringe Filter

Aijiren’s Caps all come with Septa, and 9mm Cap is the most popular choice, because 9mm Cap with Vial are Aijiren’s hot-selling products. The screw Neck design ensures the consistency of the seal and the pattern, and the seal is good, and it is convenient for manual operation. The operation meets the needs of laboratory personnel, and the packaging of 100pcs meets the convenience of experimental use.

The clear glass crimp vial produced by Aijiren uses borosilicate hydrochloric acid glass. This type of glass is divided into 5.0 type and 7.0 type. Customers can choose according to their own needs. The quality of 7.0 type is better and it can carry more reagents.

Syringe filter is a disposable filter unit designed to remove impurities from liquids or gases using a syringe as the fluid delivery system.
It consists of a plastic housing with an inlet and an outlet, and a filter membrane positioned between them.
The filter membrane is often made of materials such as polypropylene, polytetrafluoroethylene (PTFE), or nylon.
To use a syringe filter, the liquid or gas to be filtered is drawn into a syringe, and then the syringe is attached to the inlet of the syringe filter.

Order as individual sample storage vials and closures or as unassembled convenience kits.
Unassembled convenience kits saves time during sample preparation.
Solid-top convenience kits include matched quantities of vials and screw caps with pre-assembled septa.
Open-top convenience kits contain shrink-wrapped vials and separately packaged caps and septa in polybags.

The hydrophobic PTFE syringe filter membrane is made of hydrophobic polytetrafluoroethylene. It filters organic solvents, aqueous solutions and gases that are chemically corrosive, and can withstand most strong acid and alkaline solutions. Product application: Used for the clarification and filtration of strong acids and alkalis, the filtration of high-temperature liquids and special chemical reagents, and the clarification and filtration of air or various gases.

Aluminum Caps for 20mm Crimp-top Vial
9.5mm Centre Hole
Septa: PTFE/ Silicone
Septa Size: 20*3mm

Membrane: HPLC Certified Nylon
Use with: Bases, Most HPLC solvents, Alcohols, Aromatic Hydrocarbons, THF.
Don¡¯t use with: Acids, Aggressive Halogenated hydrocarbons, protein samples (Nylon is a high binder)
Sterilization: Syringe filters can be sterilized by autoclave at 125¡ã for 15 minutes.
Applications: General Laboratory filtration, most HPLC samples

2 ml PP clear short thread sample bottle refers to a sample bottle made of polypropylene (PP) with a short thread design. These bottles are commonly used in laboratory and industrial settings for the collection, storage, and transportation of various samples, including liquids, powders, or solid specimens.

HPLC Vial Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. When used in conjunction with autosampler vials, micro inserts allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial.

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

The 9mm screw neck vial is the 9mm screw neck vial, which has the highest sales volume among Aijiren’s HPLC vials, because it can be used with most autosamplers on the market. In addition, the 9mm screw neck vial has a wide mouth and is convenient for automatic injection. Needle for pulling samples.

Our Headspace Vial features a user-friendly design with a labeling area for easy sample identification and traceability. This enables efficient record-keeping and organization in your laboratory, ensuring accurate tracking and retrieval of crucial analytical information.

8-425 screw-thread vials are the original, standard opening vials£¬Vials are manufactured of Clear, Type I Class A or Amber, Type I Class B borosilicate glass, Vials have a standard graduated write-on patch for easy filling and identification of sample, Require the use of 8-425 closures and 8mm septa.

The aijiren chromatography sample vial is made of borosilicate glass and meets ASTM TYPE I ClassA and USP TYPE I standards.
There are four types: colorless and amber vial, handwriting area and no handwriting area.

2ml Autosampler HPLC Screw glass vials are small containers used in high-performance liquid chromatography (HPLC) analysis. They are designed specifically for use in autosamplers, which are instruments used to inject samples into the HPLC system automatically.
These vials are made of high-quality glass that is resistant to the solvents and chemicals commonly used in HPLC analysis. The vials have a capacity of 5 milliliters, which is the maximum volume of sample they can hold. The vials are typically clear or amber in color, with clear vials allowing for visual inspection of the sample, while amber vials provide protection against light-sensitive samples.

The automatic sample vial is produced from high-quality raw materials. It has high-temperature resistance and corrosion resistance. Controlled manufacturing environment quality and service have won the trust of customers.

The Syring Filter with nylon membrane produced by Aijiren has good hydrophilicity, acid and alkali resistance, and oxidation resistance. It is not only suitable for aqueous solutions containing acids and alkalis, but also for organic solvents such as alcohols, hydrocarbons, lipids, phenols, ketones and other organic solvents. It can be used for organic solvents such as strong acid, 70% ethanol, dichloromethane and so on. High temperature resistance, good strength, stable chemical properties.

2 ml 9 mm HPLC vial kits are convenient packages that include a selection of vials, caps, and septa specifically designed for use in high-performance liquid chromatography (HPLC) applications. It ensures compatibility between vials, caps, and septa, reducing the risk of mismatched or incompatible parts that can compromise sample integrity and analysis results.

9mm screw caps, septa and sample vials are specially designed for use with rotating or robotic samplers. 2ml, 12X32mm sample vials are made of amber, Class 1, Class B, Class B, and B borosilicate glass, and are equipped for sample identification The available cap colors include yellow, red, green and blue.