Closures suit for GC Vial

PVDF Syringe filter has many advantages. PVDF film has high mechanical strength, is not easy to break or curl; it has the advantages of low background, wide solvent compatibility, and excellent coloring ability; in addition, PVDF film can be tested repeatedly after proper treatment. The pore size of PVDF membrane is 0.22¦Ìm and 0.45¦Ìm. 0.22¦Ìm is suitable for proteins with molecular weight less than 20kDa, which can effectively reduce the leakage of small molecular weight proteins. Compared with 0.45¦Ìm PVDF membrane, it has higher protein adsorption rate and protein sequencing yield. For example, the adsorption capacity of insulin and BSA are 1.64 times and 1.58 times that of the commonly used 0.45¦Ìm PVDF membrane, respectively.

11mm Snap Closures are an extension of the crimp cap sealing system. Stretch the plastic cover on the edge of the 11mm Snap Vial, and form a seal by squeezing the Septa between the glass and the PP Cap. The advantage of the plastic snap cap is that it can be assembled without tools. 11mm Snap Closures is a simple sealing system. If 11mm Snap Closures have a very tight fit, they are difficult to apply and may crack. If the fit is too loose and the seal is not good, Septa may fall off.

The septa produced by Aijiren uses high-quality raw materials. The raw materials are softened and heated into a mold into a shape with the same size and size. Then, a unique process is used to combine Silicone and PTFE, and finally cut and cut into a size suitable for Vial. . Aijiren, as a rubber factory, has enough experience and strength for Septa’s quality assurance.

During Aijiren’s production process, more production is used as a backup. Autosampler Vial with part of the margin is packaged in a carton for packaging. Aijiren’s factory can provide Autosampler Vial, Headspace Vial, COD Test Tube, Syirnge Filter and other different products. Production, so Aijiren has great advantages in exporting products. These advantages have created Aijiren and made Aijiren a well-known supplier of chromatography consumables in China.

The Crimp Closures produced by Aijiren are made of aluminum. This metal Cap is very strong and will not leak air after the Hand Crimper is sealed. Aijiren uses plastic sealed bags to pack 100pcs/pack. If customers need, Aijiren also provides plastic cans. This kind of packaging can reduce squeezing and ensure that each closure is complete.

Aijiren 18mm magnetic screw cap (silver) and silicone/PTFE septa. Cap: The magnetic 18 mm screw cap can be effectively tested on the gas chromatograph autosampler, and the standard aperture of the center hole ensures the effective injection of the autosampler. Septa uses inert PTFE and Silicone bonding, or PTFE and Butyl bonding, these can be provided to customers to choose.

In order to produce 9mm closures, Aijiren purchased brand new automatic production equipment, such as septa production machines and Cap production machines, and Aijiren can also automate the assembly of Cap and Septa, and realize the pre-cutting machines for Septa, all of which are available in the Aijiren factory of.

Aijiren’s septa for 24mm screw closures uses natural-color Silicone and PTFE. These Septas have a diameter of 22mm and a thickness of 3mm, which are consistent with the size of the Cap and can be placed between the Vial and the Cap to isolate the air and the sample. The size is 3mm. The thickness is also very suitable for needle piercing. The material of Septa is soft and tough, not easily deformed and will not break.

There are two types of packaging for 20mm Crimp Top Closures produced by Aijiren, one is packaged in plastic bags, the other is packaged in threaded plastic cans, and the quantity is 100 per bag/can. Aijiren is packaged in cans. Because 20mm Crimp Top Closures are easily squeezed and deformed during transportation, which affects the sealing effect in the experiment, they are packed in cans.

In addition, the material of Butyl determines that Septa is not easy to deform, even if it is used for a long time, it is stretched. Aijiren uses high-quality raw materials, which ensures that Butyl Septa will not break and contaminate the sample when it is penetrated by the automatic injection needle in time.

Aijiren’s 9mm Screw Neck Autosampler Vial is one of Aijiren’s most popular products. The screw neck and 2ml capacity are very compatible with the specifications of the autosampler, especially Aijiren’s 100pcs/pack, which is very convenient for customers to use. It is well received, has strong stability and is not easily affected by other reagents.

The 9mm screw cap produced by Aijiren has a center hole to facilitate the sampling of the injection needle of the autosampler. The injection needle will penetrate the septa and enter the interior of the vial for extraction. The thread pattern of the 9mm screw cap fits closely with the vial. Septa is slightly squeezed between the cap and vial to fill the gap, so the sealing is extremely high.

Aijiren recommends that each syringe filter be used only about 10 times. If there are too many impurities in the reagent, the pore size of the syringe filter will be blocked and the filtration task cannot be completed. The Syringe filter provided by Aijiren has a favorable price and good quality. It is very suitable to change to a new Syringe filter to continue filtering after using it several times.

9mm Screw Neck Closures-Polypropylene Screw Cap with two-layer material compound Septa can provide anti-evaporation seal. The double layer includes Silicone and PTFE. This compounded Septa can be used for multiple injections. And it is matched with a PTFE lined screw cap for organic samples. The screw cap provides an inert, air-tight seal and the use of a syringe needle to directly penetrate the sample.

Aijiren’s PTFE syringe filter housing is made of high-quality polypropylene (PP) with high mechanical strength and good chemical compatibility. The filter membrane is made of hydrophobic polytetrafluoroethylene (PTFE). No binders or additives are used, and there is little interference with the analysis. Teflon syringe filters are widely used in laboratories. It does not require membrane replacement and filter cleaning, eliminating complicated and time-consuming preparations. PTFE Syringe Filter is mainly used for sample pre-filtration, clarification and removal of particulate matter, and sterilization and filtration of liquids and gases. HPLC and GC are the preferred methods for small samples.

The workers of Aijiren in the picture are packaging the Micro-Insert. This kind of Micro-Insert is usually suitable for Autosampler Vial. For the Autosampler Vial of 9mm, 10mm, 11mm caliber, the capacity is 300ul, and the outer diameter is 5 or 6mm micro-insert. Both can be adapted, but for Autosampler vials with a diameter of 8mm, only micro-inserts with an outer diameter of 5mm can be used.

The thread of the magnetic metal cap fits closely with the Headspace Vial, and the thickness of Septa can also ensure that it is slightly squeezed to achieve a sealing effect when the cap is closed by Vial. The Cap with a center hole can facilitate sample injection without leaking reagents. The function of magnetism is to better fit the autosampler.

The screw closures produced by Aijiren are used for 9mm screw vial. 9mm screw vial is the most commonly used autosampler vial. Because of the 9mm opening and 12*36mm bottle body, it is compatible with most types of autosamplers and the convenience of screw closures It has also become the reason why screw vial sells well.

Aijiren’s 20mm headspace vial is a popular product of Aijiren, and its corresponding Aluminum Cap with PTFE/Silicone Septa is also a popular product of Aijiren. It is precisely because of Aijiren’s excellent quality and favorable price that Aijiren has become the most well-known chromatography in China. One of the manufacturers of consumables.

The COD Test Tube produced by Aijiren is often used for water quality analysis, environmental monitoring, oxygen demand detection and other chemical experiments. This requires high raw materials for the production of COD Test Tube, and requires stable and inert glass for production. The technical requirements for manufacturers are relatively high. As a factory with decades of production experience, Aijiren can easily handle this task.

Autosampler vial kit package
100pcs autosampler vials
+ 100pcs caps (screw caps / crimp caps / snap caps)
+ 100pcs septa ( ptfe/silicone / ptfe/silicone/ptfe or preslit septa)
New Package for safer shippment, lower damage rate

PTFE disposable syringe filter is a fast, convenient and reliable filter tool, often used in laboratories. It has the characteristics of beautiful appearance, light weight and high cleanliness. Because there is no need to replace the filter membrane and clean the filter, it saves tedious and time-consuming preparation work. It is widely used in laboratories, widely used for sample pre-filtration, clarification and removal of particulate matter, and sterilization and filtration of liquids and gases.

Aijiren’s syringe filter with nylon membrane is compatible with a variety of solvents and is very suitable for rapid filtration of most aqueous and organic solutions. Therefore, when the mixture of the sample aqueous solution and the organic solvent passes through the membrane, the fine droplets of the extraction solvent gather and separate from the sample aqueous solution. The nilong syringe filter produced by Aijiren is environmentally friendly and has no centrifugal effect. By filtering the receptor phase, it can provide a higher sample purification rate.

Crimp Neck Closures produced by Aijiren are often used in Crimp top Headspace Vial. The production of Crimp Neck Closures is fully automated. As a factory with 20 years of production experience, Aijiren can meet the quality of Crimp Neck Closures and become a well-known manufacturer of chromatographic consumables in China.

Aijiren has been engaged in the production of chromatographic consumables for 20 years. The types of products produced by Aijiren include Autosampler Vial, Syringe Filter, COD Test Tube, Headspace Vial, Reagent Bottle, etc. These products need to be packaged and shipped after Aijiren is produced. This uses the packaging workshop in the picture.

And the nylon membrane syringe filter produced by Aijiren can be used for alkaline blotting and fixation. If fixing methods such as baking and ultraviolet light are used, higher nucleic acid detection sensitivity can be obtained. Since the nylon membrane is a hydrophilic membrane, it does not need to be immersed in a solution such as ethanol or methanol for activation. The nylon syringe filter produced by Aijiren is only for professionals to use for scientific research, not for food.

Aijiren is a professional manufacturer specializing in the production of Autosampler Vials, Headspace Vials, Reagent Bottle, Syringe Fiter, etc. The production method adopted by Aijiren is fully automated mechanical production, which ensures that every vias undergoes strict inspection and conforms to ISO standard. The picture shows the packaging workshop of Aijiren. The produced Vias will be packed in boxes and waiting for shipment in the packaging workshop.

Aijiren¡¯s syringe filter has many different types of membranes. Aijiren can also sell membranes separately. Different reagents need to choose membranes of different materials to avoid the reaction between the membrane and the reagents and affect the experimental results. Aijiren usually recommends customers to choose PTFE, because PTFE is extremely inert and suitable for most reagents.

Aijiren’s Septa made of high-quality raw materials can protect the seal inside the Vial to a certain extent, and will not break or fall off the cap after the automatic injection needle is punctured. This is to a large extent. Gas chromatography experiments provide convenience, and bring safe and accurate results.