Clear Glass Vial 1ml Shell Vial

The reagent bottles are made of durable materials, such as borosilicate glass, offering excellent chemical resistance and long-term durability. The clear glass construction allows for easy visibility and monitoring of the reagent level. The GL45 screw cap provides convenient sealing and unsealing of the bottle, facilitating easy access to the reagent.

8-425 HPLC Vials is a GC and HPLC standard sample bottle, small caliber, 8-425 standard thread, suitable for autosampler and sample storage. It can be used with matching septa. The 8-425 autosampler vial is always suitable for Shimadzu, Spectra-Physics, Varian, and other autosamplers. It is a popular product of Aijiren, and it can be customized whether to add a writing area or a scale.

A low coefficient of thermal expansion (3.3), provides temperature resistance that is far superior to that of standard lab glass (or soda lime glass). Aijiren glass can withstand temperatures from -70 to 500°C, permitting repeated use in freezers, microwaves, autoclaves and dry heat sterilization chambers.

1. Septa and slit septa are available. 2. The usually available cap color is silver, and other special colors can also be produced accordingly. 3. Easy to apply and easy to remove. 4. Aluminum sealing ring with pre-inserted septum is compatible with standard opening crimp top vials.

Autosampler Vials, Caps and Closures Aijiren 20 mm Headspace Glass Vials Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish.

10mm sample bottles are widely used in the pretreatment of samples analyzed by gas chromatography and liquid chromatography. With the development of testing technology and the improvement of testing standards, the quality requirements for sample bottles have also increased. The 10mm large opening of Aiji can effectively prevent the risk of injection needle deviation.

11mm vial micro insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro Inserts allow for maximum sample recovery and easier sample removal when combined with hplc autosampler vials.

With the use of headspace vials, the whole experiment can be prepared for analysis in an efficient and accurate way. The essence of this experiment is that the volatile sample is heated and vaporized to form a gas in the top space of the headspace vial and then diffuses. Finally, the gas in the vial enters the gas phase detection.

The sample vial and caps have strict size standards and can be matched with various models of autosamplers such as Aijiren, Waters, Varian, and Shimadzu.

Polypropylene (PP) is recommended for one time use only with low vapor transmission. Polypropylene is a rigid plastic that is translucent. At room temperature, polypropylene exhibits excellent chemical resistance to acids, alcohols, and bases. Polypropylene is compatible with acetone, ethyl acetate, methanol, isobutyl alcohol, methanol, and methyl ethyl ketone. Polypropylene is incompatible with cyclohexane, ethers, dichlorobenzene, pentanes, methylene chloride, and trichlorobenzene.

PP cap is made in one molded piece of inert, chemically resistant polyethylene. The starburst slits allows for easy needle penetration. Developed for high-sensitivity applications, especially in the LCMS Market, the purity of this cap for extractables is well below the picogram range. This highgrade polyethylene does not have the contamination issues PTFE/Silicone septa show at low levels of detection, while also sealing exceptionally well.

There are many differences between butly rubber and natural rubber. The main advantage is that butyl rubber has better chemical stability and aging resistance than natural rubber. It has the elasticity of natural rubber and contains no protein components, but not butyl. Chemical Stability and Aging Resistance

• Fits 96 position tray
• Designed for best seal
• Push in cap for easy seal
• Lot to lot quality assurance with lot number coding
• Aqueous sample compatibility
• Caps have 0.01” center for easy needle penetration
• Type 1 borosilicate glass

Our syringe filters are high quality, packaged and sold at fair competitive prices. They are available in most of the major membrane materials including nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF, and are available in 13mm, 17mm, 25mm and 30mm formats for virgin polypropylene housings.

Aijiren’s chromatography vial has a wide-mouth crimp cap that provides a larger target area and improves the accuracy of the autosampler needle. The crimped vials with integrated micro inserts are made of transparent glass. Septa types: PTFE/silicone, natural rubber/TEF septa, single slit septa are available. The three-layer spacer of natural rubber/red butyl/TEF combines the good physical properties of Nat. Rubber with good butyl chemistry (resealability).

15-425 Screw storage vials are suitable for the packaging of various pharmaceutical intermediates, high value-added chemicals, chemical reagents, biological reagents, cosmetics, essences and oils, etc. It is suitable for long-term storage and transportation for products, and has excellent sealing performance.

The production process of high-performance total organic carbon (TOC) sample bottles is kept clean, and the workshop and production process are guaranteed to be clean, which can reduce instrument background and ensure top-level system performance for low-level monitoring.
It is equipped with a polypropylene cap with an open top and a PTFE/silicone low-leakage gasket bonded to the cap. The level 1 vials have been assembled and quality checked before leaving the factory.

The Supelco hand held crimper provides a consistent and dependable seal that allows secure vial closure each and every time. The high quality construction is engineered for durability and long life to provide a smooth and simple operation.
The adjustable hand crimper is ideal if you use varying thickness of septa in your analysis. This product has the ability to be adjusted for changes in septa thickness. This product is very useful in SPME applications requiring the use of a thinner septa.

The 20mm head crimper removes aluminum caps safely and quickly with a single grip. The adjustable crimp caps crimper provides an adjustable stop on the handle to ensure consistent tightening and loosening of the cap each time, and the depth of the jaws can be changed by adjusting the screws inside the crimp.

GL45 Screw 100ml Reagent Bottle is a type of laboratory glassware commonly used for storing and dispensing chemicals or reagents in scientific and research settings.
It is designed with a standard GL45 screw cap, which ensures a secure seal and prevents any leakage or contamination of the contents.
he bottle is made of high-quality borosilicate glass, which is resistant to thermal shock, chemical reactions, and corrosion.
This makes it suitable for a wide range of applications, including the storage of acids, bases, solvents, and various other liquid reagents.

2ml snap top chromatography autosampler borosilicate glass vials are commonly used in analytical laboratories for storing and handling samples in chromatography applications. These vials are designed to fit into autosampler systems, which are used for automated injection of samples into chromatography instruments such as gas chromatographs (GC) or liquid chromatographs (LC).When using 2ml snap top chromatography autosampler borosilicate glass vials, it is important to handle them carefully to prevent breakage and ensure a proper seal. Proper labeling and storage of the vials are also recommended to maintain sample integrity and traceability.

Efficiently hold and organize vials while using them or for storage. Save space by stacking the 50 or 100 plastic vial racks on top of each other. Economical and convenient storage for samples of your screw cap and crimp seal vials. Can be stacked when empty or full. Autoclavable, 120¡ã C.

The V-bottom design of the high recovery vials produced by Aijiren is to minimize the residual reagents in the vial, and the automatic injection needle can be directly inserted into the bottom to suck up the reagents. It is often used in experiments where reagents are precious or in rare quantities.

Use a disposable filter and a disposable sterile syringe to filter and sterilize, first suck the solution to be filtered into the syringe, and then pressure the solution into the sterile container under the filter (which contains a filter membrane with a pore size of 0.22 microns) ,This is done. If the amount of solution to be filtered is large, you can purchase a filter device with a pump.

Syringe filtration is a crucial technique in laboratory settings, playing a vital role in sample preparation for various analytical methods.