China vial manufacturer 20mm gc vials pharmacy decapper vial crimper

The snap-on sample vial is made of type 1 borosilicate glass (type A, 33 expanded borosilicate glass), transparent or amber, or made of polypropylene. The snap-on vial can accept either aluminum snap-on seals or polyethylene snap-on caps. Very suitable for short-term storage. You can also deactivate MS authentication.

ND11 Snap Neck Autosampler Vials is suitable for most autosamplers on the market. It has a wide neck design and is easy to fill. It is suitable for 6mm diameter intubation tubes. Sample bottles with inscriptions provide graduated labels for easy sample identification. High-quality imports generally use 5.0 The glass tube is made of borosilicate hydrochloric acid, and the lid is made of polyethylene material to reduce the damage caused by repeated use of the lid

24mm Silicone/PTFE Septa is matched with 24mm screw neck cap, suitable for 24mm screw sample storage vial. Aijiren has an exclusive production technology that can compound PTFE and Silicone without adding any adhesives, so Aijiren’s Septa is soft and not easily deformed.

The COD Test Tubes produced by Aijiren are often used for chemical oxygen demand detection. The glass used in the COD Test Tubes produced by Aijiren has high temperature resistance, corrosion resistance, and can well protect the samples without affecting the experimental results. Aijiren’s raw materials are of high quality and production experience Abundant, with favorable product prices, it is a high-quality supplier of chromatographic consumables.

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

11mm Snap Closures are an extension of the crimp cap sealing system. Stretch the plastic cover on the edge of the 11mm Snap Vial, and form a seal by squeezing the Septa between the glass and the PP Cap. The advantage of the plastic snap cap is that it can be assembled without tools. 11mm Snap Closures is a simple sealing system. If 11mm Snap Closures have a very tight fit, they are difficult to apply and may crack. If the fit is too loose and the seal is not good, Septa may fall off.

Snap cap vials have standard 12×32 profiles compatible with 11mm snap caps or 11mm crimp closures. Snap caps can be easily pushed or pulled by hand. 11mm Gc Snap Top Cap with Ptfe Silicon Septum for 2ml Snap Vial, 11mm Gc Snap Top Cap with Ptfe Silicon Septum for 2ml Snap Vial in SupplierAijiren Technology Co., Ltd.

2 ml borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample storage and analysis.Borosilicate glass is preferred in HPLC because it offers excellent chemical resistance and thermal stability, making it suitable for handling a wide range of solvents and temperature conditions.When working with water samples in HPLC, borosilicate glass vials are a suitable choice due to their resistance to water and other polar solvents.

In addition to producing Autosampler Vial, Aijiren is also rich in matching Caps. Usually Caps are made of high-quality polypropylene for use in automatic sample injection vials. Aijiren uses a unified standard to produce PP Caps in an assembly line project to ensure that the Cap lines between batches are consistent and there is no difference. It is convenient for the customer’s laboratory sampling operation.

The chemically inert lid used in the Sample storage vial is ideal for most chromatography and storage applications. Use top PTFE or silicone septa to ensure clean production and stable quality of sample bottles.

A syringe filter is a disposable filtration device that is attached to a syringe for the purpose of filtering or clarifying liquid samples.
It consists of a plastic housing with a membrane filter that allows for the removal of particles or contaminants from the sample as it passes through the filter.
Syringe filters are widely used in research laboratories, quality control laboratories, pharmaceutical industries, biotechnology companies, and other applications where the filtration of liquid samples is necessary.

Aijiren uses high-quality raw materials to make 16mm Test Tube for Water Analysis. Customer satisfaction and praise have made Aijiren one of the largest laboratory consumables producers in southern China. First, Aijiren will stick original intention to ensure the quality of 16mm Test Tube for Water Analysis.

The GL45 Reagent Bottle for Laboratory conforms to the GL45 standard, ensuring compatibility with a wide range of laboratory equipment and accessories. These bottles fit standard GL45 closures, such as caps, adapters, and pouring rings, facilitating seamless integration into laboratory workflows. This compatibility promotes ease of use and reduces the risk of errors or inconsistencies in laboratory procedures.

Metal caps offer the widest range of temperature tolerances and are very resistant to fracture from impact. Metal caps are great for gas chromatography applications. A metal closure is manufactured from either steel (coated with anti-corrosive coating of either chromeplate or tinplate) or aluminum.

Efficiently hold and organize vials while using them or for storage. Save space by stacking the 50 or 100 plastic vial racks on top of each other. Economical and convenient storage for samples of your screw cap and crimp seal vials. Can be stacked when empty or full. Autoclavable, 120¡ã C.

11mm Crimp Neck Vials is made of high-quality 33 expanded borosilicate 51A brown (type 1 type B) glass. Some sample bottles provide graduated writing labels for easy identification of samples. Wide neck design is easy to fill. If there is a need for small sample detection, it can be matched with micro -insert.

Aijiren participated in Analytica China in Shanghai in 2020. At that time, Aijiren carefully designed the booth in order to promote the products, and went to Analytica China with full products and sincerity. This was to give customers more convenience and let the industry use it more. Those who know Aijiren, know Aijiren.

13/25 mm 0.22/0.45 um syringe filters are used to achieve a cleaner and purer liquid sample for various laboratory applications. They are particularly useful in sample preparation for analytical techniques such as chromatography or spectroscopy, where removing impurities is crucial for accurate results.The filtered liquid passes through the membrane and collects in a separate container, while the impurities are retained by the filter.

The neck finish of 2ml Crimp Vial allows the use of standard aluminum seals. Surface treatment eliminates the need for crimping or capping. Designed for use in autosamplers. Choose from clear or amber type I borosilicate glass. The ID design combines the StepVial function, which can accurately center the limited volume of the insert on the bottleneck of the sample. A scaled marking point can be provided.

Aijiren’s PVDF syringe filters are hydrophilic in nature and have strong chemical compatibility. They can bring precision to your research and ensure the highest level of performance. Our filter range is designed with female leur-Lock imports and male Leur-slip exports. In addition, these filters have better mechanical resistance and it can withstand high temperatures.

The Aijiren 15x45mm vials have a 13-425 GPI thread and can hold up to 4ml of sample. Use the 13 x 425 caps with septa for use as sample vials and with diffusion caps for wash vials. With closed top screw seals, these vials can also be used as storage vials.

Order as individual sample storage vials and closures or as unassembled convenience kits.
Unassembled convenience kits saves time during sample preparation.
Solid-top convenience kits include matched quantities of vials and screw caps with pre-assembled septa.
Open-top convenience kits contain shrink-wrapped vials and separately packaged caps and septa in polybags.

Vial crimper is ideal for small batch capping operations and sample preparation operations. Designed for laboratory use with good chemical resistant surface coating, the manual capper is widely used for laboratory headspace sample vial crimping.