China manufacturer laboratory chromatography 1.5ml sample vial in wholesale price with 9mm Ptfe Silicone Pre-slit Septa

The Aijiren 8-425 screw cap and vial are suitable for waters and other rotating or robotic arm samplers. The specifications for the 8-425 HPLC sample vial are 12 x 32 mm. The opening of the 8-425 HPLC sample vial is 40% larger than the standard narrow opening vial, preventing syringe problems. Accurately handle bottlenecks and enable the mechanical arm to operate efficiently. The special screw design ensures a consistent seal.

9-425 Screw Cap 2ml HPLC vial is a type of vial commonly used in High Performance Liquid Chromatography (HPLC) applications. It is designed to hold samples for analysis in HPLC systems.The vial has a capacity of 2ml, which refers to the maximum volume of liquid it can hold. The 9-425 designation indicates the thread size and type of the screw cap, which is compatible with specific autosampler systems.These vials are widely used in chromatography laboratories for the storage and analysis of liquid samples in HPLC systems.

The 2ML HPLC Crimp Top Vial is very suitable for HPLC analysis, because it has good sealing properties and guarantees the same quality of samples. Crimp Top Vial should be used with Crimper and Decrimper. Crimp Top Vial of different calibers needs to be used with different Crimper and Decrimper. Aijiren provides high-quality Crimp Top Vial and Crimper&Decrimper, hoping to provide you with some convenience.

The aijiren chromatography sample vial is made of borosilicate glass and meets ASTM TYPE I ClassA and USP TYPE I standards.
There are four types: colorless and amber vial, handwriting area and no handwriting area.

Aijiren 13-425 glass vials with screw cap are customized products based on your experimental requirements for vial types, writing areas, logos and other individual parameters. Aijiren 13-425 glass vials with screw cap is fully compatible with SHIMADZU autosamplers. Compared to crimp top vials, 13-425 glass vial with screw cap can easily tighten the lid without the help of a tool. Polypropylene threaded cap with PTFE septa, can form a good seal on the vial, improve work efficiency.

These caps form an exceptionally tight seal and offer a good chemical barrier. This liner molds itself around the sealing areas of the finish as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, binding and backing off. Great for everything from liquids, to soaps, to macro-invertebrates.

• Widely used in HPLC applications, universally usable vials for almost autosamplers, include the one with robotic handing.
• Snap vials can be closed with either snap caps or crimp caps.
• Snap caps can be easy as push-on, pull-off by hand.
• Clear glass vials–made from USP Type I, Class A, 33Borosilicate Expansion glass
• Amber glass vials—made from USP Type 1 Class B, 51Borosilicate Glass.

1.5ml 9mm Screw Neck Vial for automatic samplers is made of low metal type 33 and 51 COE borate glass to prevent sample instability or leaching. By selecting the cap and pad, we provide the best sealing solution for the sample.

Snap caps provide a secure seal that minimizes evaporation, even with volatile samples. Snap caps are often more convenient than crimp caps as they can easily be applied and removed by hand. An audible click ensures a secure seal has been formed and that the cap is correctly aligned. Snap/crimp vials can be closed with either snap caps or crimp caps.

2ml Crimp HPLC Vial requires a relatively inexpensive painted aluminum crimp cap. When properly assembled, it will become the best seal for long-term storage. 2ml Crimp HPLC Vial with Cap needs to be used with crimper and cap opener. The crimp cap cannot be reused, it can only be used once.

1.5ml/2ml 8-425 autosampler vial (Shimadzu chromatography sample vial) is provided by Zhejiang Aijiren Rechnology Co., Ltd., instead of imported Shimadzu sample bottle, standard GC, HPLC sample bottle, 5MM caliber, 8-425 standard Threaded port can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum. The bottle cap is made of high-quality polypropylene, and the septum is manufactured with high-quality materials to ensure the efficiency of the function.
Applicable to: Beckman, Diane, Finnigen, Gilson, LKB, Thermoelectric Thermo, Varian Varian, Shimadzu and other autosamplers.

2ml screw autosampler vial refers to a specific type of vial used in laboratories for the storage and analysis of samples. It is designed to be compatible with autosamplers, which are automated instruments used for sample handling and injection into analytical instruments such as gas chromatographs (GC) and liquid chromatographs (LC).
The “2ml” refers to the vial’s nominal volume, which is 2 milliliters. This volume indicates the maximum capacity of the vial. The vial typically has clear glass or sometimes amber glass construction, allowing for visibility of the sample contents. The vial is cylindrical in shape with a screw thread on the outer surface of the neck.

The Aijiren Crimp top sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

1.5ml Autosampler HPLC Screw glass vials are small containers used in high-performance liquid chromatography (HPLC) analysis. They are designed specifically for use in autosamplers, which are instruments used to inject samples into the HPLC system automatically.
These vials are made of high-quality glass that is resistant to the solvents and chemicals commonly used in HPLC analysis. The vials have a capacity of 1.5 milliliters, which is the maximum volume of sample they can hold. The vials are typically clear or amber in color, with clear vials allowing for visual inspection of the sample, while amber vials provide protection against light-sensitive samples.

Snap Cap Vials Wide opening vial is easier to fill and provides a larger target area for the autosampler needle Fit most autosamplers that accommodate the 12x32mm vial format Superior quality 33 expansion borosilicate clear glass Type 1, (Class A) or 51A amber glass Uniformly flat

Aijiren 2ml snap neck has 40% lager target area which makes it much safer for the autosampler needle. Snap vials can be closed with either snap caps or crimp caps. Snap cap vials cannot be pressurized, but can be easy as push-on, pull-off by hand. A audible click ensures a secure seal has been formed and that the cap is correctly aligned. Precision-formed neck improves autosampler handling.

9mm screw thread caps, septa, and vials are designed especially for use with Aijiren’s and other rotating or robotic are samplers
2ml 12*32mm clear borosilicate glass vial,with a write-in patch; high quality polypropylene caps, ptfe / silicone septa can be pre-slit to easy needle penetration

2ml snap HPLC vials are less likely to be damaged when removing the cap because there is a lot of glass used in the vial neck. Snap-neck HPLC vials are compatible with either crimps or snap vial devices. You don’t need any special tools to remove the cap. Because seals are not as safe as crimps or threaded seals, 2ml snap HPLC vials are recommended for short-term sample storage and non-volatile samples.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

Brand: Aijiren
Mouthful capacity: 2.0ml
Material: made of grade 1 hydrolyzed glass
Color: brown
Whether OEM processing: Yes
Packing: 100 pcs/box, packed in PP plastic pallet box

Caps are made of high quality polyproylene to exact manufacturing tolerances and lined in a controlled manufacturing environment, Cap colors are available in black only, Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration.

1.5ml/2ml Screw neck HPLC clear vials are a type of vial used in high-performance liquid chromatography (HPLC) applications.
HPLC clear vials are made from clear glass, typically borosilicate glass, which offers excellent visibility and chemical resistance.
The clear glass allows for easy visual inspection of the sample and facilitates accurate volume measurements.
These vials are specifically designed to meet the requirements of HPLC applications, which often involve sensitive and precise analyses.
Screw neck HPLC clear vials are a type of vial used in high-performance liquid chromatography (HPLC) applications.

2ml Clear/Amber Hplc borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample storage and analysis.orosilicate glass is preferred in HPLC because it offers excellent chemical resistance and thermal stability, making it suitable for handling a wide range of solvents and temperature conditions.

The 9mm screw neck vial is the 9mm screw neck vial, which has the highest sales volume among Aijiren’s HPLC vials, because it can be used with most autosamplers on the market. In addition, the 9mm screw neck vial has a wide mouth and is convenient for automatic injection. Needle for pulling samples.

11mm Snap Top Closures are made of PP. The translucent Cap design allows users to see the fixed card slot. The inside of the Snap Cap has 4 protrusions for fixing in the lateral groove of the Vial Neck.

The Aijiren sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

1.5ml HPLC borosilicate glass vials are a type of autosampler vials specifically designed for use in High-Performance Liquid Chromatography (HPLC) applications.
HPLC is a widely used analytical technique that separates, identifies, and quantifies components in a liquid sample.
1.5ml HPLC borosilicate glass vials are commonly used in pharmaceutical, environmental, and other analytical laboratories where HPLC analysis is performed.

Although most laboratories have switched to 9 mm screw thread vials for a wider opening while still being autosampler compatible, some labs use 8-425 vials for storing solvents. The standard opening 8-425 vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.