China gc vial supplier 20mm vial crimper

A syringe filter (or wheel filter) is a single-use, membrane-based device used for the removal of particulate impurities from small (≤ 100 mL) liquid samples. Selected based upon the desired end application, disposable syringe filters are commonly used in labs for fast and efficient filtering, material purification, or even sterilization.

20ml precision screw headspace vial, 18mm, round bottom, top space vial, strong adsorption. Headspace vials are manufactured to provide uniform glass thickness which insures even heat distribution for consistent sampling reliability.

The 9mm hplc vials produced by Aijiren can be used in many places and scenarios. The GC System is just one of them. More often, the 9mm hplc vials produced by Aijiren are used in different Autosamplers. Its compatibility is a major part of its popularity. the reason. Aijiren’s 9mm hplc vials is one of the most popular products.

Septa-silica gel has strong repetitive sealability, and it can maintain good close performance after multiple injections; PTFE is a material with better chemical conditions at present, and it can withstand strong acids and alkalis. The two materials After compounding, the bottle can be used for various laboratory purposes such as sealed sampling, chemical storage and so on.

Aijiren is a manufacturer specializing in the production of Autosampler Vial. It is precisely because of Aijiren’s expertise that it has its own production base and production line, which can guarantee large base production while ensuring quality. Aijiren’s quality inspection system is very strict. Aijiren’s staff will be in Via There are dozens of inspection procedures in the production process to carry out quality inspections, and you can rest assured to purchase Aijiren’s Autosampler Vial.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Crimp closures N11 are also universally suitable with regard to autosampler compatibility, however, they are not as safe and convenient in their closing technique as the screw closures N 9 (9mm) 2ml vials and closures.

Water Sample Cell
Color: Clear
Volume: 20ml, 30ml
Size: 25x60mm, 25x95mm
Cap: with black cap

There are three types of 2ml HPLC Vials produced by Aijiren, Screw, Snap and Crimp Top. These three types of Vials can be used for autosamplers, but different bottlenecks are used with different types of machines, but these three types of vials The maximum capacity is 2ml, and you can choose vias with label area on the bottle.

Aijiren now offers a full range of GC headspace vial kits, including Crimp and Screw Top configurations. All sample vials are type 1 borosilicate glass, and the range is wide enough to cover all major manufacturers’ instruments, including Shimadzu, Aijiren, PE, CTC and Tekmar headspace instruments.

Manufactured in state of the art moulding facility using high purity virgin polypropylene.
PP Material confirming to US FDA 21 CFR.
Used for storage of PCR reagents, enzymes and other diagnostics and biochemical reagents or sample.
HDPE screw closure is leak proof.
Can be used at low temprature.
Amber Storagr Vial can be used for light sensitive samples.

Screw Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. The material of Headspace Vials is low extractable Borosilicate glass with low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance and high chemical stability. Headspace Vials suitable for headspace analysis of volatile solids and gases.

Another way to determine the micron size of columns, 0.45 um for >3 um, and 0.22 um for <3um. 0.45 um membranes are typically used for general filtration and particle removal while 0.2/0.22um membranes, or sterilizing-grade membranes, are most commonly used for solution sterilization (bacteria removal).

20mm Crimp Caps squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The crimp cap vial requires crimping tools to carry out the sealing process.

500ml reagent bottle refers to a type of laboratory container specifically designed for holding chemical reagents. It has a capacity of 500 milliliters, which is equivalent to half a liter or approximately 16.9 fluid ounces. Reagent bottles are typically made of glass or plastic and have a narrow neck with a screw cap or stopper to secure the contents and prevent spillage or contamination.

And the nylon membrane syringe filter produced by Aijiren can be used for alkaline blotting and fixation. If fixing methods such as baking and ultraviolet light are used, higher nucleic acid detection sensitivity can be obtained. Since the nylon membrane is a hydrophilic membrane, it does not need to be immersed in a solution such as ethanol or methanol for activation. The nylon syringe filter produced by Aijiren is only for professionals to use for scientific research, not for food.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance.

A  headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

PVDF Syringe filter has many advantages. PVDF film has high mechanical strength, is not easy to break or curl; it has the advantages of low background, wide solvent compatibility, and excellent coloring ability; in addition, PVDF film can be tested repeatedly after proper treatment. The pore size of PVDF membrane is 0.22¦Ìm and 0.45¦Ìm. 0.22¦Ìm is suitable for proteins with molecular weight less than 20kDa, which can effectively reduce the leakage of small molecular weight proteins. Compared with 0.45¦Ìm PVDF membrane, it has higher protein adsorption rate and protein sequencing yield. For example, the adsorption capacity of insulin and BSA are 1.64 times and 1.58 times that of the commonly used 0.45¦Ìm PVDF membrane, respectively.

With the Aijiren COD tube test, each user can easily perform highly sensitive and accurate water detection.
The time required for the measurement process is significantly shortened, especially for standard analysis and series measurement, while significantly reducing the workload.
The COD Test tube contains a precise dose of reagent. Therefore, excessive chemical inventory is avoided and work safety is improved.

Bule, white, red ptfe material
white, natural silicone material
Sufficient materials for makeing vial septa
Aijiren is professional vial septa maker for hplc gcms vials, sample vials

Aijiren Headspace Vial and Cap facilitates automatic quality control or sample selection by performing headspace gas analysis. Common applications of Aijiren Headspace Vial and Cap include detection industry analysis, gas in polymers and plastics, volatile substances in beverages and foods, perfumes and cosmetics; also used to analyze the gasification of volatile organic solids and liquid samples. In recent years, the popularity of this technology has been recognized by laboratories around the world.