Cellulose Acetate Syringe Filter on Sale

Syringe filter is a small, disposable device used for filtration purposes in laboratories and other scientific settings. It consists of a plastic housing with a membrane filter at one end and a female luer lock or male luer slip connection at the other end, allowing it to be attached to a syringe.
The purpose of a syringe filter is to remove impurities, particulates, or unwanted substances from a liquid sample before it is injected or analyzed. The membrane filter within the syringe filter acts as a barrier, selectively allowing only certain particles or molecules to pass through while retaining larger particles.

Use Aijiren CA syringe filter to remove interfering substances and fine particles to the rated pore size, thereby obtaining a cleaner sample extract. Cellulose acetate (CA) syringe filters are ideal for filtering tissue culture media and filtering sensitive biological samples. Adding a syringe filtration step before chromatographic injection not only helps to ensure more consistent and reliable results, it also helps protect the instrument and extend the life of the column. Economical choice Syringe filters are available in a variety of sizes and membrane types to meet the needs of any application.

Due to the high hydrophobicity of the PVDF membrane, it needs to be immersed in ethanol, methanol or other suitable solutions for activation. This product is only for scientific research by professionals, and must not be used for clinical diagnosis or treatment, or used for food or medicine, and must not be stored in ordinary residences. For your safety and health, please wear lab coats and disposable gloves for operation.

1. The pore size of the needle-punched membrane is accurate, providing comprehensive protection for your instrument and chromatographic column
2. There is a clear label on the Nylon syringe filter to avoid confusion
3. The luer interface of the needle filter with lock can prevent the filter from flying out due to excessive pressure

Among the many medium types of Syringe Filters produced by Aijiren, Polypropylene Syringe Filter is a special one. Because Polypropylene is often used to make the shell of Syringe Filter, there are fewer types of membranes made of Polypropylene. Aijiren finally decided to use this material to produce Syringe Filter after studying the production materials of many different manufacturers and the usage of different customers.

PTFE (polytetrafluoroethylene) performance: suitable for water system and various organic solvents, resistant to all solvents, low solubility. It has the characteristics of air permeability and water impermeability, large air flux, high particle retention rate, good temperature resistance, resistance to strong acids, alkalis, organic solvents and oxidants, resistance to aging, non-stickiness, non-flammability, non-toxicity, and biocompatibility. Its related products are widely used in chemical, pharmaceutical, environmental protection, electronics, food, energy and other fields

The Lab Use Syringe Filter MCE is a versatile filtration tool designed for laboratory applications. Constructed with high-quality mixed cellulose ester (MCE) material, these syringe filters offer excellent chemical compatibility and durability. They effectively remove particulates, microorganisms, and impurities from liquid samples, ensuring enhanced sample purity for accurate analysis.

The special color contrast provided on the surface of the MCE film helps to detect particles and minimize eye strain. It is ideal for the recovery and retention of bacteria in colony counting and sterility testing, as well as water/wastewater analysis and other microbiological tests.

Aijiren’s Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housings.

Features of the syringe filter: Luer lock inlet provides a sealed syringe connection, with various filter types, porosities and diameters. Color coding is easy to identify. Rugged polypropylene shell. Can be autoclaved to 121℃ for 15 minutes. The quantity exceeds the minimum order quantity to save more.

In HPLC analysis, the particle size of the chromatographic column packing is small and it is easy to be blocked by impurity particles. Therefore, samples and solvents need to be filtered in advance to remove particulate contaminants and protect the instrument. Ion chromatography, which is commonly used in environmental analysis, also requires that no inorganic pollutants be introduced in sample pretreatment.

Aijiren syringe filter membrane use method introduction: before inhaling the sample, suck about 1ml of air into the syringe, so as to minimize the liquid residue, suck the sample into the syringe, invert the syringe and clear all the residues on the top Clean, connect the needle filter to the syringe, tighten it gently to ensure a good seal, filter the sample in the syringe and inject it into the sample bottle, and then follow the steps to maximize the recovery rate, remove the filter, and suck air into the syringe, Reconnect the filter head and eject all residual samples.

The PTFE syringe filter is tritium-free and has a two-way membrane support and Luer lock inlet/outlet and a safe and suitable syringe. The membrane type and pore size are printed on each filter for easy identification. All Aijiren syringe filters are 100% integrity tested and comply with ISO 9002 standards. The sterilizing filter is sterilized with gamma rays. And detect no pyrogen, no cytotoxicity.

A syringe filter (or wheel filter) is a single-use, membrane-based device used for the removal of particulate impurities from small (≤ 100 mL) liquid samples. Selected based upon the desired end application, disposable syringe filters are commonly used in labs for fast and efficient filtering, material purification, or even sterilization.

The use of PTFE syringe filters can be used for corrosive solvents, aerosol sampling, degassing agents, exhaust applications and organic-based HPLC filtration. The syringe filter has a variety of different filter covers, and has a wide range of chemical compatibility, and has strong chemical stability and inertia.

PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing.

Aijiren’s sterile syringe filter has a bidirectional diaphragm support and Luer lock inlet/outlet, which can be securely mounted on the syringe. The type and pore size of the membrane are printed on each filter for easy identification. All Aijiren syringe filters are 100% integrity tested and manufactured according to ISO 9002 standards. The sterile filter is sterilized by gamma radiation. They are proven to be pyrogen-free, non-cytotoxic, and are blister packs.

These syringe filters feature a user-friendly design that allows for easy and efficient filtration. They are compatible with standard luer-lock syringes, providing a secure and leak-free connection. The nylon membrane has a small pore size, typically ranging from 0.2μm to 0.45μm, enabling efficient removal of contaminants while retaining the desired analytes. The filters provide high flow rates and low protein binding, making them suitable for a variety of sample types.

The reinforcement ring can provide greater strength to the shell to prevent leakage and bursting (30mm product pressure is rated at 120 psi). The shell is made of solvent-resistant, low-extraction polypropylene resin, specifically selected for wide compatibility with common HPLC sample matrices. The solution can be filtered at temperatures up to 100¡ãC, which is convenient and easy to use.

The PTFE syringe filter is a general-purpose filter, and it is also Aijiren’s higher-selling syringe filter. PTFE is inert to many aggressive solvents and strong acids and alkalis. These syringe filters can also be exposed to high temperatures and are an excellent choice for HPLC sample preparation. Aijiren offers PTFE syringe filters in a hydrophobic state.

Cellulose Acetate Syringe Filter Surfactant-free membrane for cleanliness in downstream applications, Filter type printed on the filter for ease of identification, Convenient, larger pack sizes,Gamma sterilised.

Aijiren’s Syringe Filter is usually 100pcs/pack. Generally speaking, it is packaged in a plastic box. If the Syringe Filter is packaged in a plastic box, the Syringe Filters will not squeeze each other. The recommended minimum order quantity is 30 boxes.

The nylon membrane used in the syringe filter has high mechanical strength, chemical stability, can be tolerated by most organic solvents, has very low extractables, has good thermal stability and natural hydrophilicity, and is filtered by most aqueous solutions characteristic.

Syringe filter is a disposable device used in laboratory settings to filter small volumes of liquid samples. It is commonly utilized to remove particulate matter and microorganisms from solutions before analysis or to protect sensitive instruments from contamination.
Syringe filters consist of a plastic housing with a membrane filter at one end and a female luer lock or luer slip connection at the other end. The filter membrane is typically made of materials such as nylon, polyethersulfone (PES), polytetrafluoroethylene (PTFE), or cellulose acetate.

Syringe filter is a quick, convenient and reliable filter tool used routinely in the laboratory.Because they don’t need to change the membrane and filter cleaning, it’s eliminating the complex and time-consuming preparation. It is widely used in the sample pre filtration, removal of particles, aseptic filtration of liquids and gases. It is the preferred method to filter small samples before loading into HPLC and GC ,and it is often used with disposable syringe.

When using vents, these syringe filters can prevent moisture from passing through. Usable pH range: 1-14. PTFE can be applied to: filtering organic solvents with strong chemical corrosiveness, filtering strong acid solvents, filtering alkali solvents, compatible with gaseous samples, and can handle high-temperature liquids.

Chromatography commonly used in environmental analysis requires that no inorganic contaminants be introduced during sample pretreatment. In HPLC analysis and IC analysis, syringe filters can be used to filter sample solutions, which is an important step in sample pretreatment.

The syringe filter produced by Aijiren is the preferred method for filtering small samples before being loaded into HPLC and GC, and is usually used with disposable syringes to filter out impurities in the sample to ensure that there is no quality in the test Problems and affect the experimental results.