Cap&Septa Assemble Machine

Aijiren is a factory specializing in the production of Autosampler Vials, with professional production machinery and equipment and large-scale production factories. It is precisely because of such a strong production base that Aijiren can guarantee the production of large quantities of products. Aijiren has a considerable number of products in stock. The operation of multiple production lines also ensures the timeliness of customer orders.

Aijiren presses Silicone and PTFE composite into the picture, and cuts them into rectangular sheets of similar size. Because PTFE is easy to curl and deform, the raw materials in the picture are all curled. Wait for it to enter the dryer to dry the moisture. Keep it level. Aijiren uses a mechanical laser to cut Septa, and guarantees the integrity and chemical nature of Septa.

The Aijiren staff in the picture is using a vernier caliper to detect 2ml HPL Vials. The thread of the amber glass hplc vial in the picture is the type of screw neck. This type of threaded hplc vial is very convenient for sealing and storage, and it is easy to operate. Autosampler Vials is the first choice of many customers. Secondly, the amber glass can avoid ultraviolet rays and protect the samples. Staff needs to check whether the specifications meet the standards, and need to check the production status of the glass texture.

Aijiren’s 9mm Autosampler Vial, Screw Threads neck fits perfectly with Closures, and the thread seal is also convenient for customers to operate. This type of vial is a hot selling model that can be applied to all models of Autosampler.

Aijiren has always insisted on using high-quality glass, because only the quality of the glass is high enough to be compatible with more samples and more convenient for customers to experiment. Therefore, Aijiren decided on borosilicate glass after various comparisons. This glass is not only resistant to high temperature and corrosion It is also inert and not easily broken, which is very suitable for large-capacity 60ml sample storage vial.

Aijiren’s 2ml hplc vial adopts a fully automated production method, mass production guarantees a large amount of daily production, Aijiren has 6 vial production lines, and can also be customized for logo or label, scale printing, and closures. Aijiren Provide the option of purchasing vial/cap separately or purchasing vial and cap together.

The PTFE layer of Aijiren’s 20mm PTFE Septa composite diaphragm is in contact with the reagent. It is chemically inert, resistant to acids, alkalis, temperature and adhesion. Even at high temperatures, it cannot work with concentrated acids, alkalis or strong oxidants. At the same time, the elasticity of the silicone rubber or silicone layer can ensure the sealing performance; Aijiren abides by strict production management to ensure the quality of the product. The product is clean and can be used directly without washing.

The 9mm Screw Closures provided by Aijiren are made of high-quality PP Cap, and the exclusive special composite process is used to make Silicone and PTFE composite Septa, and the process of combining Cap and Septa is completed by the machine. The 9mm Screw Closures produced by Aijiren are sufficient. Able to complete chromatographic analysis experiments.

Aijiren not only produces autosampler vial, but also accessories for autosampler vial. Cap with Septa, especially the production of Cap, needs to be exactly the same as Autosampler Vial. It must also produce different types of Cap with different necks. Aijiren is a high-quality company. Chromatography consumable manufacturers, there is no error between the PP Cap produced, and it can perfectly match Autosampler Vials

Aijiren’s 9mm Amber Vial has a huge production workshop and many production lines. The 9mm Amber Vial provided by Aijiren is 100 pcs/pack. Generally speaking, it is packaged in PP Box. The minimum order quantity is 10 boxes. It supports two-in-one packaging with PP Closures or Individually packaged.

Unique dual-track cap and septa combination machine
Double track, double speed, double efficiency

The 9mm Screw Closures produced by Aijiren have many advantages such as high quality, strong adaptability, resistance to cracking, high temperature resistance, chemical resistance, etc. Since 9mm Screw Closures have many different styles and materials, the demand for 9mm Screw Closures is very high. High and diversified options also allow customers multiple choices.

The packaging of Sample Storage Vial produced by Aijiren uses PP Box, 100pcs is a box, Aijiren’s minimum order quantity is generally 10 boxes, because the order of too small quantity will cause the volume of the vial to be larger, and the shipping cost is more expensive than the product price. In order to avoid this situation, Aijiren set the sample storage Vial’s minimum order quantity to 10 boxes.

Aijiren provides Cap customization services. Customers can customize Cap according to their own experimental needs. As long as Aijiren can provide them, Aijiren will try to provide customized services. Today, Aijiren is already a well-known supplier of chromatography consumables in China. Aijiren will continue to work hard to improve itself, broaden its product line, and maintain high-quality production.

Bule, white, red ptfe material
white, natural silicone material
Sufficient materials for makeing vial septa
Aijiren is professional vial septa maker for hplc gcms vials, sample vials

Aijiren Provide ODM OEM service
the custom logo can be printed on the vials in printing workwhop
through plate making, printing, High temperature baking, to packing
2-3 times checking during the whole process to make sure high quality

20mm PTFE Septa can overcome the degradation that occurs due to long-term high temperature, because it is very common in silicone rubber septa. Degradation causes baseline drift and extra peaks. Therefore, the 20mm PTFE Septa produced by Aijiren is usually fixed with the PTFE side facing the column packing. For most GC/MS and other high-sensitivity detectors, Aijiren recommends septa materials with the PTFE logo; these are the cleanest and highest performing products. The PTFE septum contains very low levels of contaminants, which minimizes interference with the analysis and guarantees excellent results on all major LC/MS and GC/MS instruments.

24mm Silicone/PTFE Septa is matched with 24mm screw neck cap, suitable for 24mm screw sample storage vial. Aijiren has an exclusive production technology that can compound PTFE and Silicone without adding any adhesives, so Aijiren’s Septa is soft and not easily deformed.

Aijiren’s 2ml hplc vial is suitable for most autosamplers, because this 2ml hplc vial has a standard thread/snap/crimp caliber pattern and a uniform shoulder distance, which is very convenient for the robot arm of the autosampler to grab it. As shown in the picture, Aijiren will prepare PP Boxes for Vial in advance, and wait for Vial’s production or printing before packaging and shipping.

Aijiren has more than ten years of production experience. Workers, test managers, and product development managers have rich experience in chromatography consumables. Aijiren has become one of the well-known manufacturers of chromatography consumables in China. Providing services in more than 200 countries and regions in the world, Aijiren will do better and work hard.

Aijiren¡¯s 9mm Screw Thread is short, and can be sealed with a slight rotation. The shoulder and neck lines are also very convenient for the autosampler to grab, and it is not easy to slip off. The vial can also customize the logo and whether it has a writing area. Aijiren will continue to make efforts for the convenience of the laboratory.

Aijiren has its own production factory. There are many production machinery and tools in the factory. Aijiren’s assembly line machine production needs to rely on molds with consistent specifications. The screw cap is shaped by pressing high-quality polypropylene into the mold. Aijiren needs to be polished. Molds, customized high-quality molds can guarantee the high standards of product production.

Aijiren uses Silicone and PTFE to produce Septa suitable for Autosampler Vial. Aijiren will compound PTFE and Silicone together in a binder-free compounding method. This Septa is softer and suitable for automatic injection needle puncture. Before laser cutting, there is a process, which is to dry in the dryer to dry the moisture in the raw materials, so as to ensure the texture and application of Septa.

Aijiren uses PP Boxes for packaging. Generally, Aijiren uses 100pcs/pack, and the box has strong anti-impact ability. It is not easy to cause the vial to break during transportation. Aijiren’s 2ml hplc Vial has three different calibers to choose from. Screw, crimp and snap, the openings are divided into 8mm-11mm, many types are convenient for customers to choose.

Aijiren has its own production workshop. In order to ensure the cleanliness of the inside of the production workshop, Aijiren has established a sanitary standard for a dust-free workshop. Employees entering the workshop need to change into uniforms. Before entering the workshop, dust must be removed inside the dust removal bellows to ensure Without bringing external dust into the workshop, the staff of Aijiren in the picture removes dust in front of the dust removal bellows.

Aijiren’s 4ml threaded sample bottle (13-425) should be matched with 13mm Screw Closures, suitable for Aijiren, Waters, Varian, Shimadzu, PE, Diane and other types of chromatographic autosamplers. The 13mm Screw Closures produced by Aijiren have accurate thread sizes, and the width of the center hole ensures accurate collection by the autosampler. The 4ml transparent screw cap sample bottle (13-425) equipped with 13mm Screw Closures can also be used as a sample bottle and storage bottle.

Aijiren’s factory is established in Quzhou, Zhejiang, which is close to the river and developed by land and water. Usually, Aijiren will notify the relevant freight forwarding company to pick up and deliver the goods after the production is completed. Generally speaking, the shipment can be completed within 3 days after the production is completed. , The next step is the time for water transportation. If the demand is not particularly large, then customers can consider express or air freight, which will be faster.

The 9mm amber vial produced by Aijiren has high quality and favorable price. Aijiren has its own factory, which can meet the customized needs of customers. Aijiren’s 9mm amber vial is often used in autosamplers and can be adapted to most brands on the market. Autosampler. 9mm amber vial is a popular product of Aijiren.

The staff in the picture is plastic-sealing the packaged 9mm hplc vials. Generally speaking, 9mm hplc vials is 100 pcs/pack. Aijiren will first put the finished 9mm hplc vials in the box, and then plastic-encapsulate it to prevent dust and moisture. This will ensure that Vial is clean and tidy. Aijiren, as a manufacturing company, is inspiring to allow customers to use the preferential and practical 9mm hplc vials.

Purchasing Aijiren’s 9mm hplc sample bottle requires the purchase of 9mm Screw Cap with Septa. Aijiren’s Caps are made of high-quality polypropylene. You can choose whether to have a center hole cover. The septum uses a double-sided combination of PTFE and silicone. The assembled lid and septum are very convenient for customers to use.