Blue Screw Neck 9mm PP Cap with Red Septa suit for 9mm vial

The PP cap will puncture with far less force than needed to puncture a PTFE/Silicone septa, thus minimizing instrument wear and tear as well as downtime. The septa are not resealable and are intended for single use.

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

The non-pre-slit septas help to reduce carryover from vial to vial because the resealing characteristics of the septum act as a squeegee to wipe solution from the outside of the needle. Typically, a non-slit septum exhibits resealing capabilities for a limited number of needle punctures but for long-term storage in the vial, using a new non-punctured septum is best practice.

blue screw cap for 9mm screw vials
with pre-slit septa white silicone blue PTFE
size: 9mm*1mm
package: 100pcs/pack

The Autosampler Vial produced by Aijiren is often used in autosamplers. Whether it is Aijiren or other brands of autosamplers, Aijiren Autosampler Vial can be perfectly adapted. It is precisely because of this that Aijiren Autosampler Vial can be so well-known and become A well-known manufacturer of chromatography consumables in the world.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

screw vials are also available in different sizes, and the cap is made of PP for sealing. The glass vial has a maximum capacity of 2ml and has a screw cap. The insert can be used with any autosampler and fits standard or wide-mouth vials.

Although most laboratories have switched to 9 mm screw thread vials for a wider opening while still being autosampler compatible, some labs use 8-425 vials for storing solvents. The standard opening 8-425 vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.

Aijiren polypropylene screw micro vials can be used in most standard gas and liquid chromatography autosamplers. These lightweight, economical vials are made from durable polypropylene which has good chemical resistance.

These vials have an internal tapered bottom which allows the contents to be concentrated at the bottom. Allows more space and larger volumes than concentrating to very small quantities. Ideal for derivatisation or target compounds with very low target concentrations.
Vial Closure Size: 9mm
Vial Volume (Metric) 1.5mL
Volume (Metric) Working 1.3mL
Material: Glass
Color: Amber
Height (Metric) 32mm
Outside Diameter (Metric) 12mm
Residual Volume: <4μL

The 9mm 1.5ml Short Thread HPLC Vials exhibit excellent chemical compatibility, making them suitable for a wide range of sample matrices and analysis methods. They can withstand exposure to organic solvents, acids, bases, and other chemicals commonly used in HPLC analysis. This chemical resistance ensures sample integrity and reliable analysis results.

Material: Brosilicate Glass/1st hydrolytic class glass
Volume: 1.5-2.0ml
Dimension: 11.6x32mm
Neck: 9mm Screw neck
Color: Amber and Clear
Septa: Pre-Slit, PTFE/Silicone
OEM & ODM Custom Service

These caps form an exceptionally tight seal and offer a good chemical barrier. This liner molds itself around the sealing areas of the finish as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, binding and backing off. Great for everything from liquids, to soaps, to macro-invertebrates.

These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative 9mm closures and 9mm screw top vials for consistent productivity on every separation. Standard opening screw-thread vials are manufactured from borosilicate glass and have a maximum fill volume of 2 ml.

Aijiren 9-425 HPLC Vial can choose the type with writing area and scale for easy filling and identification of samples. Aijiren 9-425 sample vials can be used with the robotic arm autosampler. The opening of the 9mm sample vial is 40% larger than that of ordinary vials to facilitate sample preparation. The Aijiren 9-425 sample vial must be used together with the 9mm screw pp bottle cap. Ensure proper fit and function.

Chromatography vial is a glass vial used by automatic samplers and headspace samplers such as liquid chromatography, gas chromatography, mass spectrometry, etc. for chromatographic automatic sampling. Its basic requirements are accurate volume, ability to withstand a certain pressure, good sealing performance, and no adsorption to samples.

The 1.5mL 9mm Short Threaded Sample Vial provides researchers with an effective solution for storing samples in a laboratory environment. It is made from premium plastic materials that reliably maintain sample integrity while producing accurate analytical results. Produced from inert borosilicate glass for chemical resistance and sample stability.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

1.5 ml vials from Aijiren Technology, Inc with high quality and favorable price. Zhejiang Aijiren is a manufacturer of Laboratory consumables. We supply autosampler vials, septa and caps at factory price. 9mm Short Thread Vials ND9 can be used for GC and HPLC.

Our 9 mm Wide Mouth Vials and Closures are our recommended screw thread vials. These vials are autosampler compatible and offer a 40% larger opening than 8-425 thread vials, simplifying pipetting and other routine functions. Aijiren Tech offers 9 mm screw thread vials in clear and amber glass, as well as polymeric options and mass spec quality glass.

9 mm screw top vial, 32×11.6 mm, clear glass, high recovery, borosilicate glass
1.5ml vial with 30ul reservoir for sample concentration and injection, no transfer to micro insert

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

High recovery vials are optimal for manual and automated compound or biological sample applications. High Recovery Vials allow maximum sample extraction without need for separate inserts

The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Glass Screw Top Autosampler Vials, the product material is of paramount importance.