Lab Sterile Syringe Filters Wholesale

PES syringe filter is mainly used for filtering and sterilizing liquid samples of small volume samples such as a small amount of buffers, protein solutions, additives, various reagents or drugs, and removing particles. It is also the first choice for sterilization and filtration of small samples of HPLC and GC. method.

By using Aijiren syringe filters unwanted particles are removed which can otherwise cause contamination and clogging of sensitive instrumentation. So, filtering your samples leads to an increase of lifetime and less downtime of chromatographic columns and equipment, gives more consistent and reproducible results and thereby saves time and money.

The EPA VOA vials feature a secure closure mechanism to maintain sample integrity and prevent sample leakage or contamination. The vials typically come with a screw cap equipped with a septum, ensuring a tight and leak-proof seal. This closure mechanism ensures the preservation of volatile organic compounds during storage and transportation.

The hydrophobic PTFE syringe filter membrane is made of hydrophobic polytetrafluoroethylene. It filters organic solvents, aqueous solutions and gases that are chemically corrosive, and can withstand most strong acid and alkaline solutions. Product application: Used for the clarification and filtration of strong acids and alkalis, the filtration of high-temperature liquids and special chemical reagents, and the clarification and filtration of air or various gases.

Aijiren disposable MCE syringe filter units are designed to provide clear filtration of aqueous and organic solutions from small volumes up to 100 mL.
MCE syringe filters are made from mixed cellulose ester (MCE) membrane and polypropylene overmolded housing.

Aijiren PP syringe filter
Product Model: 25mm,0.22um Sterilization Independent Packaging
Application: sterilize and filter the aqueous solution
Operating temperature: 45¡ãC
Inlet pressure: bar (psi): 5.2 (75)
Wettability: hydrophilic
Filter membrane diameter: 25mm
Membrane aperture: 0.22um

13mm, 25mm 0.22um, 0.45um hydrophobic PVDF (polyvinylidene fluoride) membrane syringe filter is a filtration device commonly used in laboratory settings to remove particulates and microorganisms from fluids.
It’s important to note that specific details of hydrophobic PVDF membrane syringe filters, such as pore size, diameter, and filtration capacity, can vary between manufacturers and product lines.
Therefore, it’s recommended to consult the product specifications or contact the supplier for precise information about the syringe filters you are considering for your specific application.

Ideal for use with aqueous and organic solvents, Nylon Syringe Filters are an excellent choice for filtering high-performance liquid chromatography samples. Nylon syringe filters are durable, tear resistant and wet evenly.
PES (Polyethersulfone ) syringe filter is natural hydrophilic which makes is an ideal choice (highly recommended) for aqueous solutions and alcohols. It’s not necessary to treat the filter membrane surface with wetting agents.

Aijiren’s expert staff is available via live chat and email to help you decide on the best membrane filter for your needs. Email us, and our helpful customer representatives will respond promptly¡ªin just one business day or sooner. And if you still need help deciding on the right product, we¡¯ll ship you a sample to ensure you receive the best membrane filter for your needs.

The MCE membrane offers exceptional retention capabilities, trapping particles and microorganisms as small as 0.22 μm in size. This fine filtration helps safeguard sensitive analytical instruments, HPLC systems, and other lab equipment from contamination, preserving their optimal performance and extending their lifespan.

Sample preparation for high-throughput Ultra High Performance Liquid Chromatography (UHPLC)/High Performance Liquid Chromatography (HPLC) analysis can be time consuming when using multiple consumables such as a syringe, syringe filter, sample vial, cap, and septum. Aijiren HPLC filters result in faster sample preparation than the normal syringe filter method.

In addition to HPLC, syringe filters have a multitude of other applications. A syringe filter adds a few minutes and a minimal expense to your testing process, but you will see a big return on your investment. Small volume venting£¬HPLC sample preparation£¬Removal of protein precipitates£¬Routine QC analysis£¬Dissolution testing.

Our syringe filters are high quality, packaged and sold at fair competitive prices. They are available in most of the major membrane materials including nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF, and are available in 13mm, 17mm, 25mm and 30mm formats for virgin polypropylene housings.

The nylon membrane used in the syringe filter has high mechanical strength, chemical stability, can be tolerated by most organic solvents, has very low extractables, has good thermal stability and natural hydrophilicity, and is filtered by most aqueous solutions characteristic.

A syringe filter is a quick, convenient and reliable filter tool used routinely in the laboratory. Because they don’t need to change the membrane and filter cleaning, it’s eliminating the complex and time-consuming preparation.  

Sterile filtration is used in many applications: serum-containing or non-serum-containing media that supports the growth of cell cultures, reagents or solutions containing sensitive components that will degrade during high temperature processing, and when there is no autoclave, filtration should be added to the sterile growth media supplement Liquid, filter samples to avoid microbial growth during storage, filter buffers, remove particulate matter and avoid microbial growth during storage, filter biological samples to be analyzed, avoid microbial contamination of expensive equipment, filter environmental samples to be analyzed, filter fermentation liquids, Further purification or analysis.

Membrane: HPLC Certified Nylon
Use with: Bases, Most HPLC solvents, Alcohols, Aromatic Hydrocarbons, THF.
Don¡¯t use with: Acids, Aggressive Halogenated hydrocarbons, protein samples (Nylon is a high binder)
Sterilization: Syringe filters can be sterilized by autoclave at 125¡ã for 15 minutes.
Applications: General Laboratory filtration, most HPLC samples

Aijiren syringe filter membrane is made of polyethersulfone (PES), hydrophilic (Hydrophilic), pore size is 0.22¿˜m, shell diameter is 13mm, effective membrane diameter is 11.7mm, and effective membrane area is 1.09cmº†.

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. Therefore, samples and solvents must be pre-filtered to remove particulate contaminants and protect the instrument.
In addition, chromatography commonly used in environmental analysis requires that no inorganic contaminants be introduced during sample pretreatment.

The syringe filter produced by Aijiren is the preferred method for filtering small samples before being loaded into HPLC and GC, and is usually used with disposable syringes to filter out impurities in the sample to ensure that there is no quality in the test Problems and affect the experimental results.

Polypropylene (PP) is recommended for one time use only with low vapor transmission. Polypropylene is a rigid plastic that is translucent. At room temperature, polypropylene exhibits excellent chemical resistance to acids, alcohols, and bases. Polypropylene is compatible with acetone, ethyl acetate, methanol, isobutyl alcohol, methanol, and methyl ethyl ketone. Polypropylene is incompatible with cyclohexane, ethers, dichlorobenzene, pentanes, methylene chloride, and trichlorobenzene.

The 0.22um 0.45um Lab Use Reusable Syringe Filter With Printing finds application in diverse laboratory settings. It is suitable for pharmaceutical research, biotechnology, environmental analysis, food testing, and other scientific research fields.

Aijiren PVDF filters are high defined pore structure, low nonspecific binding, compatible with organic and aqueous solvents. Please note that Hydrophilic PVDF syringe filters are not compatible with majority of strong acids and caustic solutions, such as dimethyl sulfoxide, dimethylformamide (DMF), acetone, ketones, esters, and ethers.

Aijiren’s PVDF syringe filters are hydrophilic in nature and have strong chemical compatibility. They can bring precision to your research and ensure the highest level of performance. Our filter range is designed with female leur-Lock imports and male Leur-slip exports. In addition, these filters have better mechanical resistance and it can withstand high temperatures.

Your benefits when using Aijiren syringe filters£ºDifferent membrane types to meet multiple filtration needs. Low content of extractable compounds. Fast flow geometry for easy filtration. Low hold-up volume for maximum filtrate recovery. HPLC certified