9mm Autosampler hplc Vial with Cap and Septa

9mm standard 2ml short threaded sample vial(2ml autosampler vial), 2ml, 12×32mm, neck diameter 9mm; red PTFE/white silicone vial gasket, blue perforated polypropylene (PP) vial cap

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections.

Vial Closure Size: 9mm
Vial Volume (Metric) 1.5mL
Volume (Metric) Working 1.3mL
Material: Glass
Color: Amber
Height (Metric) 32mm
Outside Diameter (Metric) 12mm
Residual Volume: <4μL

9mm standard 2ml short threaded sample vial(2ml autosampler vial), 2ml, 12×32mm, neck diameter 9mm; red PTFE/white silicone vial gasket, blue perforated polypropylene (PP) vial cap, sample vial has Transparent, amber, transparent with scale writing, and amber with scale writing are available for selection, suitable for various models of autosamplers such as Aijiren, Waters, Varian and Shimadzu.

High recovery vials are optimal for manual and automated compound or biological sample applications. High Recovery Vials allow maximum sample extraction without need for separate inserts

Chromatography vial is a glass vial used by automatic samplers and headspace samplers such as liquid chromatography, gas chromatography, mass spectrometry, etc. for chromatographic automatic sampling. Its basic requirements are accurate volume, ability to withstand a certain pressure, good sealing performance, and no adsorption to samples.

High recovery vials offer precision vials made from low expansion borosilicate glass and designed with a unique interior bottom, solid glass vial of a Microliter-Vial with inner cone, allowing for maximum retrieval of contents by a syringe.  

9-425 short thread vials with screw caps wholesale, the best supplier in China
Aijiren provides chromatography vials, caps, vial inserts, syringe filters for hplc, glass reagent bottles, etc
Suitable for most autosampler use in the market

Autosampler vials are available in a variety of sizes, with 2 mL vials being the most common size. During the injection process, the autosampler needle pierces the cap and extracts the desired amount of analyte from the vial. There are different types of vials for chromatography applications.

 9mm Screw conical micro-vial for lab chromatography experiment, the micro-vial size is 11.6x32mm.  High quality glass vial for HPLC/GC analysis. 0.3 ml clear or amber  glass micro insert fixed in 2ml glass vial.

9mm screw autosampler vial is widely used in laboratory chromatographyanalysis. Aijiren as one of largest chromatography consumable supplier, supplies 9mm screw HPLC vial in wholesale price. This 9mm screw vial package can reduce screw vial mouth touch to prevent contamination of sample. At the same time, the package box can be used as a vial rock, it is save the cost. Welcome to inquiry us about chromatography consumable.

With its 9mm screw thread design and capacity of 1.5mL, this vial makes for easy handling and integration into autosamplers. Ideal for applications requiring limited quantities. The vial comes equipped with various finishes and closure options, such as screw caps and snap caps, so researchers can select their ideal choice according to their unique research needs.

2mL Clear Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vial, the product material is of paramount importance.

9mm thread screw neck vial, 32×11.6mm, transparent / amber PP, with graduation line, slightly concave shaped bottom
Preassembled cap and septafor 9mm thread screw PP cap, blue, centrel hole, PTFE/Silicone 9x1mm

Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.

The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Glass Screw Top Autosampler Vials, the product material is of paramount importance.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

The staff in the picture is disassembling the assembled 9mm Screw Neck Cap with Septa. These are 9mm Screw Neck Closures randomly selected from different machines. Since Aijiren produces more machines, many samples need to be checked. Solution to check whether Septa and Cap are damaged, if they are not sturdy, Septa may fall off or fall off easily. Aijiren’s strict quality inspection guarantees the quality of the product.

The 9mm screw cap is made from high-quality material, providing excellent durability and chemical resistance. Its precise threading allows for easy and efficient sealing, ensuring a reliable closure for HPLC vials. The septa, made of a specialized material, offers optimal inertness and compatibility with a wide range of samples, ensuring accurate and reproducible results in HPLC analysis.

The non-pre-slit septas help to reduce carryover from vial to vial because the resealing characteristics of the septum act as a squeegee to wipe solution from the outside of the needle. Typically, a non-slit septum exhibits resealing capabilities for a limited number of needle punctures but for long-term storage in the vial, using a new non-punctured septum is best practice.

The vial is made of colorless Class 1 A or amber Class 1 B borosilicate glass. The automatic sample vial is produced from high-quality raw materials. It has high-temperature resistance and corrosion resistance. Controlled manufacturing environment quality and service have won the trust of customers.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.