Aijiren Filtration Syringe Filter

The advantages of nylon: 1. Toughness 2. Wear resistance 3. Smoothness 4. Light weight 5. Insect resistance 6. Anti-mold and the material is not easy to generate static electricity, deformation, pilling and ageing.

The MCE membrane offers exceptional retention capabilities, trapping particles and microorganisms as small as 0.22 μm in size. This fine filtration helps safeguard sensitive analytical instruments, HPLC systems, and other lab equipment from contamination, preserving their optimal performance and extending their lifespan.

Syringe filter is a disposable filter unit designed to remove impurities from liquids or gases using a syringe as the fluid delivery system.
It consists of a plastic housing with an inlet and an outlet, and a filter membrane positioned between them.
The filter membrane is often made of materials such as polypropylene, polytetrafluoroethylene (PTFE), or nylon.
To use a syringe filter, the liquid or gas to be filtered is drawn into a syringe, and then the syringe is attached to the inlet of the syringe filter.

13 mm Syringe Filters: For sample volumes

Compared with Nitrocellulose membrane (NC membrane), PVDF membrane has many advantages. PVDF membrane has high mechanical strength, is not easy to break or curl; it has the advantages of low background, wide solvent compatibility, and excellent coloring ability; in addition, PVDF membrane can be repeatedly tested after proper treatment.

Features of MCE: uniform pore size, thin texture, low flow resistance, high filtration speed, low absorption, all items are quality tests for filter efficacy and housing integrity. The housing is pressure tested and can withstand pressures up to 75 psig (5.0 bar). Some filters are individually packaged aseptic packaging, certified, RNase, DNase and DNA free, and non-pyrogenic.

Our Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 25mm formats in virgin polypropylene housings.

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. Therefore, samples and solvents must be pre-filtered to remove particulate contaminants and protect the instrument.
In addition, chromatography commonly used in environmental analysis requires that no inorganic contaminants be introduced during sample pretreatment.

The use of PTFE syringe filters can be used for corrosive solvents, aerosol sampling, degassing agents, exhaust applications and organic-based HPLC filtration. The syringe filter has a variety of different filter covers, and has a wide range of chemical compatibility, and has strong chemical stability and inertia.

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. Therefore, samples and solvents must be pre-filtered to remove particulate contaminants and protect the instrument.

Use a disposable filter and a disposable sterile syringe to filter and sterilize, first suck the solution to be filtered into the syringe, and then pressure the solution into the sterile container under the filter (which contains a filter membrane with a pore size of 0.22 microns) ,This is done. If the amount of solution to be filtered is large, you can purchase a filter device with a pump.

Aijiren Syringe Filter is a comprehensive range of non-sterile disposable syringe filters for reliable sample pre-treatment. Reproducible membrane quality and automated manufacturing processes ensure particles are removed from all samples, extending the life of analytical columns and minimizing injection port and valve damage. The Aijiren syringe filter is available in 0.22um and 0.45um porosity, 4, 13, 25 and 30mm diameters.

PTFE (polytetrafluoroethylene) performance: suitable for water system and various organic solvents, resistant to all solvents, low solubility. It has the characteristics of air permeability and water impermeability, large air flux, high particle retention rate, good temperature resistance, resistance to strong acids, alkalis, organic solvents and oxidants, resistance to aging, non-stickiness, non-flammability, non-toxicity, and biocompatibility. Its related products are widely used in chemical, pharmaceutical, environmental protection, electronics, food, energy and other fields

The nylon membrane of the syringe filter should be compatible with the chemical characteristics of the sample. The nylon membrane should be compatible with various water-based and organic solvents. The membrane should also have high resistance to HPLC solvents and chemicals. The 0.45mm aperture ensures that you have enough capacity and throughput to process samples efficiently and quickly.

1. The pore size of the needle-punched membrane is accurate, providing comprehensive protection for your instrument and chromatographic column
2. There is a clear label on the Nylon syringe filter to avoid confusion
3. The luer interface of the needle filter with lock can prevent the filter from flying out due to excessive pressure

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. t. In HPLC analysis and IC analysis, syringe filters can be used to filter sample solutions, which is an important step in sample pretreatment.

In order to filter the particles correctly, you need to find the right size filter. You should choose the diameter of the filter carefully. They usually have sizes of 13mm, 25mm and 30mm. Each of these has a different ability to hold particles. According to the sample size, you can choose the appropriate filter diameter. For example, a diameter of 13 mm can be used for 1-10 ml samples. Similarly, 25 mm PVDF syringe filters can be used for sample volumes of 10-100 ml. Their retention is less than 100 ml.

PES (Polyethersulfone ) syringe filter is natural hydrophilic which makes is an ideal choice (highly recommended) for aqueous solutions and alcohols. It’s not necessary to treat the filter membrane surface with wetting agents.

PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing.

A syringe filter is a quick, convenient and reliable filter tool used routinely in the laboratory. Because they don’t need to change the membrane and filter cleaning, it’s eliminating the complex and time-consuming preparation.  

Aijiren disposable cellulose acetate(CA) syringe filter devices are designed to provide clear filterate of aqueous and organic solutionsfrom small volumes up to 100 mL.

Membrane: HPLC-certified PVDF
Use with: Alcohols, weak acids, proteins, peptides and other biomolecules
Don¡¯t use with: ?Some strong acids, bases, esters, ethers or ketones.?
Sterilization: Syringe filters can be sterilized by autoclave at 125¡ã for 15 minutes.?
Applications: General biological filtration, filtration of samples for high protein recovery.?

The Non-sterile Disposable Syringe Filter is a versatile filtration device used in laboratories for sample preparation and clarification. It consists of a polypropylene housing with a membrane filter, providing efficient filtration of particulate matter and microorganisms. These syringe filters are available in various pore sizes and diameters to suit different filtration needs, and they come in non-sterile packaging.

Filter sterilization, that is, removing microorganisms by physical means such as screening or filter material adsorption, is a commonly used method of sterilization. The filtration method is widely used, and some materials that need to be sterilized cannot be heated, such as many vitamin solutions. In addition to being used in the production of beverages and drugs, the air is often sterilized by filtration. When we usually do microbiology experiments, the sterilized container is usually plugged with cotton at the outlet, which is actually filtering to remove microorganisms in the air, so that there is no microbial contamination in the air entering the container.