Aijiren 2ml Glass Vials for HPLC

The 9mm screw neck vial is the 9mm screw neck vial, which has the highest sales volume among Aijiren’s HPLC vials, because it can be used with most autosamplers on the market. In addition, the 9mm screw neck vial has a wide mouth and is convenient for automatic injection. Needle for pulling samples.

Aijiren’s 8-425 2ml Autosampler Vials is very popular. It is favored by our customers for its high quality and cheap price. Aijiren is a manufacturer of 8-425 2ml Vials, so we bring our customers to the factory price.Buy 8-425 vials,Choose Aijiren.

The Aijiren Crimp top sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

The aijiren chromatography sample vial is made of borosilicate glass and meets ASTM TYPE I ClassA and USP TYPE I standards.
There are four types: colorless and amber vial, handwriting area and no handwriting area.

Aijiren’s 9-425 Autosampler Vials are available in clear and amber colors, and Aijiren produces Cap with Septa that is matched with 9-425 Autosampler Vials. Only the Closures made of Screw Thread’s 9mm diameter PP are compatible. Septa uses PTFE and Silicone is compounded without adhesives to ensure the stiffness and quality of Septa.

2 ml snap top autosampler borosilicate glass vials are a specific type of vials commonly used in analytical laboratories and automated sample handling systems. They are designed for convenient and secure sealing, as well as compatibility with autosamplers for efficient sample handling.

Aijiren is committed to ensuring the safety and integrity of the analyzed samples. Aijiren provides an innovative 10mm 2ml Hplc screw Vials to ensure that all experimental data during the separation process are consistent. 10-425 Screw Vials are the best choice for the latest autosamplers. The standard opening vial is made of borosilicate glass and has a maximum filling volume of 2ml.

Aijiren is a supplier of Autosampler Vial. Aijiren has been in this industry for more than 10 years. Aijiren’s Vials are of good quality and affordable. And it is suitable for Autosampler of Waters. It can bring a lot of help to the daily experiment of the laboratory.

If the reagent to be tested by the customer is very precious and the capacity of 2ml vial is too large, Aijiren 8-425 2ml Autosampler Vials can be used with different types of micro-insert. There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert. All three types of micro-insert can be adapted to 8-425 2ml Autosampler Vials.

2ml 9mm fisher screw autosamplers are automated instruments commonly used in analytical laboratories for sample handling and injection into analytical instruments such as gas chromatographs (GC) or liquid chromatographs (LC).
Fisher Scientific offers a wide range of laboratory equipment, including autosamplers from various manufacturers.
Borosilicate glass vials are commonly used in laboratory and pharmaceutical settings for the storage and transportation of various liquid or solid samples.
Borosilicate glass is a specialized type of glass that contains boron trioxide, which gives it unique properties compared to regular soda-lime glass.

Capacity: 1.5/2ml
Temperature: -60—200℃
Material: bottle (domestic borosilicate); gasket (Teflon/silicone); lid (polypropylene)
Color: bottle (transparent/amber), cap (blue)

1.5/2ml autosampler vial refers to a type of sample container commonly used in analytical chemistry and laboratory settings.
The vial has a total volume capacity of 1.5 to 2 milliliters (ml).
Autosampler vials are designed to be compatible with automated liquid handling systems, such as autosamplers, which are used to inject samples into analytical instruments for analysis.
The vial typically consists of a cylindrical glass or plastic body with a narrow opening at the top.
It is sealed with a cap or septum to prevent sample contamination and evaporation.

Aijiren 9-425 HPLC Vial can choose the type with writing area and scale for easy filling and identification of samples. Aijiren 9-425 sample vials can be used with the robotic arm autosampler. The opening of the 9mm sample vial is 40% larger than that of ordinary vials to facilitate sample preparation. The Aijiren 9-425 sample vial must be used together with the 9mm screw pp bottle cap. Ensure proper fit and function.

Silver aluminum caps ND11 refer to a specific type of closure used for sealing vials or containers with an ND11 neck size. ND11 refers to the outer diameter of the vial’s opening, which is a standardized measurement in the laboratory industry.

Silver aluminum caps are commonly used in laboratory settings due to their durability, chemical resistance, and ability to provide a secure seal. Here are some key features of silver aluminum caps

Aijiren is a supplier of 2ml 9mm Screw HPLC Vials. Our factory specializes in the production of vials for chromatography. We use good raw materials to make vials and sell them at a cheap price while ensuring quality.
The 2ml 9mm Screw HPLC Vials provided by Aijiren can be added with a writing area, which is convenient for customers to mark
samples during experiments and to distinguish samples. Aijiren’s 2ml 9mm Screw HPLC Vials also accept logo customization. If
the customer needs, we can print the customer’s brand logo on the vial. We provide customized services to facilitate customer needs. If you need 2ml 9mm Screw HPLC Vials or customized service, please contact us.

9 mm screw top vial, 32×11.6 mm, clear glass, high recovery, borosilicate glass
1.5ml vial with 30ul reservoir for sample concentration and injection, no transfer to micro insert

2ml / 1.5ml glass crimp vials with crimp seals for hplc autosampler
Crimp the caps to the vials with the hand crimper
100pcs per pack, aluminum caps with ptfe silicone septa, 100pcs per pack

The crimp vials produced by Aijiren are made of transparent or amber type 1 borosilicate glass or polypropylene. Requires crimper and lid opener. Very suitable for long-term storage. Deactivation and MS authentication can also be used.

2ml Crimp HPLC Vial requires a relatively inexpensive painted aluminum crimp cap. When properly assembled, it will become the best seal for long-term storage. 2ml Crimp HPLC Vial with Cap needs to be used with crimper and cap opener. The crimp cap cannot be reused, it can only be used once.

Autosampler borosilicate glass vials are specifically designed for use in autosamplers, which are automated instruments used in high-performance liquid chromatography (HPLC) and other analytical techniques. These vials are constructed from borosilicate glass, known for its excellent chemical resistance and thermal stability.hen selecting autosampler borosilicate glass vials, it is essential to consider factors such as vial size, closure compatibility, and the specific requirements of your autosampler instrument.

The 8-425 Autosampler Vial provided by Aijiren can choose Caps with or without a center opening, an autosampler with a center opening for easy sampling, and an HPLC Vials without a center opening for storing samples. Sapmle not easy to damage and volatilize.

Aijiren’s 9mm hplc vials are very suitable for Autosampler, especially Aijiren’s machines, because Aijiren’s 9mm hplc vials have a long neck to facilitate the grasping of instruments, and the bottom is flat and easy to place in the sampling area, and the accuracy of the thread is guaranteed Improved the sealing performance of 9mm hplc vials. In addition, Aijiren’s Cap and Septa have types that are convenient for Autosampler to puncture. Cap has a center hole, and Septa is very convenient for puncture.

The Crimp Vial produced by Aijiren has a standard 11.6x32mm shape and is compatible with 11mm aluminum sealing caps. Hand Crimper is required for crimp sealing and Decrimper for unsealing. Aijiren provides supporting 11mm Hand Crimper and Decrimper, which are easy to operate and well sealed.

11mm Gc Snap Top Caps With Ptfe Silicone Septa For 2ml Snap Vials , Find Complete Details about 11mm Gc Snap Top Caps With Ptfe Silicone Septa For 2ml Snap Vials,Auto Sampler Vial,Hplc Vial,Snap Vial from Supplier or Manufacturer-Jiangyin Allpro Polymer Technology Co., Ltd.

Aijiren’s Snap Top 2ml HPLC Vials for autosampler are constructed from type 33 and type 51 COE borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching.
By choosing Aijiren caps and septa, you provide your sample with a the best containment solution available.

Borosilicate glass is a type of glass that is known for its high resistance to heat and thermal shock. It is composed primarily of silica and boron oxide, which give it its unique properties.
Borosilicate glass has a low coefficient of thermal expansion, meaning it does not expand or contract significantly when exposed to changes in temperature. This makes it highly resistant to thermal stress and allows it to withstand rapid temperature changes without breaking.
Overall, borosilicate glass is valued for its exceptional thermal properties, chemical resistance, and optical clarity. Its versatility and durability have made it a preferred material in various industries, particularly in laboratory settings and for specialized glassware applications.

The 2ml crimp auto sample vial is easy to fill because it is a sample vial with a wide opening. Fits most autosamplers especially for Aijiren. The 2ml crimp autosampler vial supports a 11.6x32mm vial format. High quality 33 extended borosilicate transparent glass type 1, class A or 51A amber glass. Uniformly flat bottom to ensure safety with inserts. You can choose a 2ml crimp autosample vial with or without a tick mark.

2ml lab autosampler vial is a small container typically used in laboratory settings to store and transport samples for analysis.
Autosampler vials are designed to be compatible with automatic sampling systems or instruments known as autosamplers.
The capacity of a 2ml autosampler vial refers to its volume, and it can hold up to 2 milliliters (2 ml) of liquid or sample.
These vials are commonly made of glass or high-quality plastic materials such as polypropylene or polymethylpentene (PMP).
The choice of material depends on the specific application and compatibility requirements.

Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum.
8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass , And attached with a writable label for sample identification.

If the reagents you test are invaluable and the capacity of the 2ml vials is too large, you can use the Ajiren 8-425 2ml autosampler vial in different types of microinse inserts. There are three types of microinse inserts. 29* 5mm 150uL micro inserts, mandolin interior and polymer feet, 150uL conical bottom micro inserts and 250uL flat-bottom microinserts. All three micro inserts can be adapted to 8-425 2ml autosampler vials.