9mm Screw Neck Vial Production

Aijiren’s sample storage vials are produced by fully automated machinery. This production method is efficient and consistent in specifications, and it is not easy to make errors. The packaging is a PP box, 100pcs is a box for packaging, the customer should purchase according to the box when purchasing, the minimum order quantity of Aijiren is 10 boxes.

Threaded storage vials have excellent chemical stability, colorless and brown are available, and have excellent sealing and corrosion resistance. This series of products are designed and produced in accordance with the requirements of the US EPA, with good storage properties. The septum and plastic cap are combined together to avoid excessive evaporation and keep the sample vial properly sealed.

Aijiren is a professional manufacturer of products such as Headspace Vials, which are large-capacity laboratory Vials. The capacity of such Vials ranges from 6ml-20ml. Generally, they are more commonly used for gas chromatography. This type of experiment requires heating the Headsapce Vials and the liquid held in it, and detecting the evaporated gas above the Vials, so the sealing performance of Headsapce Vials is required to be high.

Aijiren’s septa can choose whether to have pre-slit or not. The pre-slit pattern is divided into one-shaped and cross-shaped. The septa with pre-slit is better to be pierced, especially for blunt automatic injection needles. , The cross star pre-slit septa can guide the automatic injection needle to accurately enter the vial to suck liquid, and will not deviate from the direction and cause the automatic injection needle to poke on the vial and cause the via to rupture.

The worker of Aijiren shown in the picture is inserting a 22mm Silicone/PTFE Septa into a 24mm Screw neck Cap. The worker wears finger cots and holds a tool to press harder to consolidate the tightness of the Cap and Septa. Since Aijiren’s automated merging of Cap and Septa machines is only suitable for the closure of 2ml autosampler vial, this large-volume closure requires manual combination by workers. Aijiren uses a dust-free workshop for production and packaging, so customers can be completely assured of hygiene issues.

Aijiren’s Caps all come with Septa, and 9mm Cap is the most popular choice, because 9mm Cap with Vial are Aijiren’s hot-selling products. The screw Neck design ensures the consistency of the seal and the pattern, and the seal is good, and it is convenient for manual operation. The operation meets the needs of laboratory personnel, and the packaging of 100pcs meets the convenience of experimental use.

In addition to producing Autosampler Vial, Aijiren is also rich in matching Caps. Usually Caps are made of high-quality polypropylene for use in automatic sample injection vials. Aijiren uses a unified standard to produce PP Caps in an assembly line project to ensure that the Cap lines between batches are consistent and there is no difference. It is convenient for the customer’s laboratory sampling operation.

Aijiren is a manufacturer of chromatography consumables specializing in the production of glass products. Its products include Autosampler Vials, Headspace Vials, Sample Storage Vials, EPA Vials, COD Test Tubes, etc. High-quality glass products ensure that customers can analyze more conveniently Experiment.

Aijiren can merge septa and cap, and before the merger, the machine can automatically identify the front and back of septa, silicone and PTFE surface, choose to fix the PTFE side up into the Cap, fully automated production saves a lot of manpower, Aijiren Be able to invest more talents in quality inspection and product development.

The Headspace Vials produced by Aijiren have two different calibers, one is Crimp Neck and the other is Screw Neck. Aijiren uses borosilicate hydrochloric acid glass to make Headspace Vials, because the borosilicate hydrochloric acid glass can ensure the stability of the reagent when it is inside the Vias. And it can also ensure the safety of Vials itself. The borosilicate glass used by Aijiren is resistant to high temperature, not easy to break, not easy to burst, and easy to use.

Aijiren not only produces autosampler vial, but also accessories for autosampler vial. Cap with Septa, especially the production of Cap, needs to be exactly the same as Autosampler Vial. It must also produce different types of Cap with different necks. Aijiren is a high-quality company. Chromatography consumable manufacturers, there is no error between the PP Cap produced, and it can perfectly match Autosampler Vials

Aijiren provides pre-assembled caps & septa, the dual-track cover pad assembly machine, used for the assembly of vial caps & septa, double tracks can greatly increase production efficiency; the pre-assembled vial closures can greatly reduce your experiment preparation work and improve experiment efficiency

Aijiren’s 4ml threaded sample bottle (13-425) should be matched with 13mm Screw Closures, suitable for Aijiren, Waters, Varian, Shimadzu, PE, Diane and other types of chromatographic autosamplers. The 13mm Screw Closures produced by Aijiren have accurate thread sizes, and the width of the center hole ensures accurate collection by the autosampler. The 4ml transparent screw cap sample bottle (13-425) equipped with 13mm Screw Closures can also be used as a sample bottle and storage bottle.

The special packaging used in the 2ml vial in the picture, 100pcs in a box with a partition to separate the vial. This kind of packaging is not only more compact and beautiful, but also can better alleviate the vibrations that occur during transportation and protect the vial. At the same time, it can also bring the brand logo printed on the box, Aijiren can meet the customer’s packaging customization plan, only need to communicate the details in place and pay the corresponding packaging costs.

Aijiren uses PP Boxes for packaging. Generally, Aijiren uses 100pcs/pack, and the box has strong anti-impact ability. It is not easy to cause the vial to break during transportation. Aijiren’s 2ml hplc Vial has three different calibers to choose from. Screw, crimp and snap, the openings are divided into 8mm-11mm, many types are convenient for customers to choose.

The packaging of Sample Storage Vial produced by Aijiren uses PP Box, 100pcs is a box, Aijiren’s minimum order quantity is generally 10 boxes, because the order of too small quantity will cause the volume of the vial to be larger, and the shipping cost is more expensive than the product price. In order to avoid this situation, Aijiren set the sample storage Vial’s minimum order quantity to 10 boxes.

20mm PTFE Septa can overcome the degradation that occurs due to long-term high temperature, because it is very common in silicone rubber septa. Degradation causes baseline drift and extra peaks. Therefore, the 20mm PTFE Septa produced by Aijiren is usually fixed with the PTFE side facing the column packing. For most GC/MS and other high-sensitivity detectors, Aijiren recommends septa materials with the PTFE logo; these are the cleanest and highest performing products. The PTFE septum contains very low levels of contaminants, which minimizes interference with the analysis and guarantees excellent results on all major LC/MS and GC/MS instruments.

Bule, white, red ptfe material
white, natural silicone material
Sufficient materials for makeing vial septa
Aijiren is professional vial septa maker for hplc gcms vials, sample vials

Aijiren’s 9mm Autosampler Vial, Screw Threads neck fits perfectly with Closures, and the thread seal is also convenient for customers to operate. This type of vial is a hot selling model that can be applied to all models of Autosampler.

The PTFE layer of Aijiren’s 20mm PTFE Septa composite diaphragm is in contact with the reagent. It is chemically inert, resistant to acids, alkalis, temperature and adhesion. Even at high temperatures, it cannot work with concentrated acids, alkalis or strong oxidants. At the same time, the elasticity of the silicone rubber or silicone layer can ensure the sealing performance; Aijiren abides by strict production management to ensure the quality of the product. The product is clean and can be used directly without washing.

24mm Silicone/PTFE Septa is matched with 24mm screw neck cap, suitable for 24mm screw sample storage vial. Aijiren has an exclusive production technology that can compound PTFE and Silicone without adding any adhesives, so Aijiren’s Septa is soft and not easily deformed.

The Aijiren staff in the picture is using a vernier caliper to detect 2ml HPL Vials. The thread of the amber glass hplc vial in the picture is the type of screw neck. This type of threaded hplc vial is very convenient for sealing and storage, and it is easy to operate. Autosampler Vials is the first choice of many customers. Secondly, the amber glass can avoid ultraviolet rays and protect the samples. Staff needs to check whether the specifications meet the standards, and need to check the production status of the glass texture.

The staff in the picture is plastic-sealing the packaged 9mm hplc vials. Generally speaking, 9mm hplc vials is 100 pcs/pack. Aijiren will first put the finished 9mm hplc vials in the box, and then plastic-encapsulate it to prevent dust and moisture. This will ensure that Vial is clean and tidy. Aijiren, as a manufacturing company, is inspiring to allow customers to use the preferential and practical 9mm hplc vials.

Aijiren’s 8mm Septa is made of Silicone and PTFE raw materials. Aijiren cuts Pre-slit on Septa for the convenience of customers. The pattern is a font and a cross. The cross-shaped pre-slit septa is the best. It is convenient for the automatic injection needle to puncture. If the customer uses a blunt needle, you can consider buying a cross-type pre-slit septa.

Aijiren uses a dust-free workshop to produce 9mm closures. The 9mm closures produced in a dust-free workshop have strict quality standards and uniform threads, which guarantee the quality of Aijiren’s products. Aijiren is planning to use product quality to build brand awareness and become a world-renowned supplier of chromatography consumables.

Aijiren produces headspace vials for the convenience of gas chromatographic analysis. Gas chromatographic analysis requires heating and other methods to vaporize the liquid in the vial and extract gas for detection and analysis through an automatic injection needle. Gas chromatograph requires the vial to have good airtightness and heat resistance. With strong stability and large capacity, the crimp top headspace vials produced by Aijiren perfectly meet these conditions.

There are two types of 24mm Screw neck Cap, center hole and closed-top. The cap with center hole can be more convenient for sample injection. The closed top can store samples and has better sealing. It can have its own for 20ml-60ml. Storage range and capacity.

Purchasing Aijiren’s 9mm hplc sample bottle requires the purchase of 9mm Screw Cap with Septa. Aijiren’s Caps are made of high-quality polypropylene. You can choose whether to have a center hole cover. The septum uses a double-sided combination of PTFE and silicone. The assembled lid and septum are very convenient for customers to use.

PTFE/silicone septa are most commonly used in HPLC applications, and pre-cut septa are easier to pierce with a needle. The cap color is generally black, but other special colors can also be produced accordingly. Easy to apply and easy to remove. Pre-installed caps and septa are very convenient. Aijiren 13mm Screw Closures are commonly used in 4ml Screw Top HPLC Vial. Aijiren can recommend the most suitable Closures for your HPLC Vial.

Unique dual-track cap and septa combination machine
Double track, double speed, double efficiency