9mm Screw Neck PP Cap be Mading

High recovery Vials are manufactured from heavy wall, low extractable, borosilicate glass providing excellent chemical resistance and durability during packaging and transportation.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

Short Thread Caps with Septa for 9mm 1.5ml HPLC Vial often come with multiple septa options to accommodate different analytical requirements. Depending on the specific application, researchers can choose from various septa materials, such as silicone, PTFE, or bonded septa, to optimize sample compatibility and performance.

The transparent glass threaded sample bottle is 2mL, 12x32mm, and has an advanced sample bottle sealing system. The screw vial can prevent the septum from being pressed in, and can provide a stop point for the bottle cap to prevent over-tightening or over-tightening, and it can provide the best and consistent seal every time.

The Lab 9mm 2ml Screw Top HPLC Autosampler Vial features a precision-engineered design, ensuring a secure and leak-proof seal. It is compatible with various autosamplers, making it a versatile choice for HPLC applications.

Our vial comes with a variety of septa options to suit your specific application needs. Whether you require septa with different materials, thicknesses, or properties, our Autosampler HPLC Vial provides versatility and customization. Select the ideal septa option to ensure optimal sample protection and compatibility with your analysis requirements.

The China 0.3ml, 9mm, Clear or Amber, Polypropylene Micro Vial is available in disposable and sterile options, catering to different laboratory needs. The disposable vials offer convenience and eliminate the need for cleaning or sterilization, saving valuable time and resources. The sterile vials are pre-sterilized, ensuring contamination-free sample storage and reducing the risk of experimental errors or cross-contamination.

The 9mm 1.5ml Short Thread HPLC Vials exhibit excellent chemical compatibility, making them suitable for a wide range of sample matrices and analysis methods. They can withstand exposure to organic solvents, acids, bases, and other chemicals commonly used in HPLC analysis. This chemical resistance ensures sample integrity and reliable analysis results.

Aijiren understands that 2ml HPLC vial are as important as chromatography columns or instruments. As a result, Aijiren 2ml HPLC sample vial are designed to meet the highest standards you can expect. So 2ml HPLC vial can be exported to 32 countries.

These caps form an exceptionally tight seal and offer a good chemical barrier. This liner molds itself around the sealing areas of the finish as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, binding and backing off. Great for everything from liquids, to soaps, to macro-invertebrates.

Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.

Aijiren offer innovative high recovery vials for comprehensive collection, automated handling and storage, with the subsequent maximum retrieval of high value samples. 1.5ml 9mm high Recovery Vials Reduce Residual Product Waste by 99%.

Suit for: 9mm Short Thread Vials
Caps Material: polypropylene
Cap Diameter: 9mm
Cap Features: 6mm Centre Hole or Closed Top
Septa Material: PTFE / Silicone
Septa Feature: Pre-slit I or X
Septa diameter: 9mm
Septa Thickness: 1mm

The 1.5mL 9mm Short Threaded Sample Vial provides researchers with an effective solution for storing samples in a laboratory environment. It is made from premium plastic materials that reliably maintain sample integrity while producing accurate analytical results. Produced from inert borosilicate glass for chemical resistance and sample stability.

Aijiren strongly recommends to use only ready-made sealing caps, whose lining matches the bottle cap completely, and has been automatically inserted under strict sanitary conditions.

9mm standard 2ml short threaded sample vial(2ml autosampler vial), 2ml, 12×32mm, neck diameter 9mm; red PTFE/white silicone vial gasket, blue perforated polypropylene (PP) vial cap, sample vial has Transparent, amber, transparent with scale writing, and amber with scale writing are available for selection, suitable for various models of autosamplers such as Aijiren, Waters, Varian and Shimadzu.

High recovery vials are optimal for manual and automated compound or biological sample applications. High Recovery Vials allow maximum sample extraction without need for separate inserts

The 9mm high recycling vial is a new vial specially designed by Aijiren for precious samples in the laboratory. Many times the autosampler will leave sample residue in the vial when it is injecting samples. If the sample is precious, this residue is undoubtedly a waste. High-recovery vials can avoid this problem.

Aijiren’s 9mm Screw Neck Autosampler Vial is one of Aijiren’s most popular products. The screw neck and 2ml capacity are very compatible with the specifications of the autosampler, especially Aijiren’s 100pcs/pack, which is very convenient for customers to use. It is well received, has strong stability and is not easily affected by other reagents.

The staff in the picture is disassembling the assembled 9mm Screw Neck Cap with Septa. These are 9mm Screw Neck Closures randomly selected from different machines. Since Aijiren produces more machines, many samples need to be checked. Solution to check whether Septa and Cap are damaged, if they are not sturdy, Septa may fall off or fall off easily. Aijiren’s strict quality inspection guarantees the quality of the product.

Vial Closure Size: 9mm
Vial Volume (Metric) 1.5mL
Volume (Metric) Working 1.3mL
Material: Glass
Color: Amber
Height (Metric) 32mm
Outside Diameter (Metric) 12mm
Residual Volume: <4μL

2ml 9mm Screw Top Autosampler Vials are cleaned and packaged in a certified Class 10,000 clean room according to a designed process, developed to eliminate chromatographic errors associated with vials. For Chromatography vials, 2ml 9mm Screw Top Autosampler Vials is the most commonly vial in laboratories. 2ml 9mm Screw Top Autosampler Vials are more leak-tight and easy for the experimenter to operate.

The Autosampler Vial produced by Aijiren is often used in autosamplers. Whether it is Aijiren or other brands of autosamplers, Aijiren Autosampler Vial can be perfectly adapted. It is precisely because of this that Aijiren Autosampler Vial can be so well-known and become A well-known manufacturer of chromatography consumables in the world.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials.

The Lab Use 9mm 2ml HPLC Autosampler Vial for Supply is a specialized vial designed for high-performance liquid chromatography (HPLC) applications. With a 9mm thread size, these vials ensure a secure and leak-proof seal, preventing sample contamination and maintaining sample integrity during analysis.

9mm screw autosampler vial is widely used in laboratory chromatographyanalysis. Aijiren as one of largest chromatography consumable supplier, supplies 9mm screw HPLC vial in wholesale price. This 9mm screw vial package can reduce screw vial mouth touch to prevent contamination of sample. At the same time, the package box can be used as a vial rock, it is save the cost. Welcome to inquiry us about chromatography consumable.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.