9mm screw HPLC vial package

The steep conical High recovery interior bottom provides exceptional downward drainage while allowing maximum retrieval of contents by syringe. High recovery Vials are perfect for specialty pharma, biotech, pharmaceutical and diagnostics packaging applications.

Capacity: 1.5/2ml
Temperature: -60—200℃
Material: bottle (domestic borosilicate); gasket (Teflon/silicone); lid (polypropylene)
Color: bottle (transparent/amber), cap (blue)

Polypropylene caps are known for good impact strength, cost effectiveness, and pliability. They can be remelted after they are formed. Aijiren Polypropylene cap is widely used in chromatography analysis.

The 9mm hplc vial provided by Aijiren has a high recovery type, which can effectively recover samples and reduce sample residues. This high recovery 9mm hplc vial is made of extremely inert borosilicate hydrochloric acid glass, which is not easy to react with chemical reagents.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

Aijiren offer innovative high recovery vials for comprehensive collection, automated handling and storage, with the subsequent maximum retrieval of high value samples. 1.5ml 9mm high Recovery Vials Reduce Residual Product Waste by 99%.

Product name: 1.5/2ml sample vial plastic PP material

Packing: vial, boxed (100 pcs/box)/caps and septa  bag (100 pcs/pack)
Size: Vial (11.6*32mm) / Gasket (Φ9*1mm)
Material: Vial (PP) / Gasket (Teflon / Silicone) / Cap (Polypropylene)
Gasket performance: acid resistance, alkali resistance, temperature resistance, anti-sticking

1.5 ml vials from Aijiren Technology, Inc with high quality and favorable price. Zhejiang Aijiren is a manufacturer of Laboratory consumables. We supply autosampler vials, septa and caps at factory price. 9mm Short Thread Vials ND9 can be used for GC and HPLC.

The 9mm 1.5ml Short Thread HPLC Vials exhibit excellent chemical compatibility, making them suitable for a wide range of sample matrices and analysis methods. They can withstand exposure to organic solvents, acids, bases, and other chemicals commonly used in HPLC analysis. This chemical resistance ensures sample integrity and reliable analysis results.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

The non-pre-slit septas help to reduce carryover from vial to vial because the resealing characteristics of the septum act as a squeegee to wipe solution from the outside of the needle. Typically, a non-slit septum exhibits resealing capabilities for a limited number of needle punctures but for long-term storage in the vial, using a new non-punctured septum is best practice.

The 9mm hplc vials produced by Aijiren can be used in many places and scenarios. The GC System is just one of them. More often, the 9mm hplc vials produced by Aijiren are used in different Autosamplers. Its compatibility is a major part of its popularity. the reason. Aijiren’s 9mm hplc vials is one of the most popular products.

9 mm screw top vial, 32×11.6 mm, clear glass, high recovery, borosilicate glass
1.5ml vial with 30ul reservoir for sample concentration and injection, no transfer to micro insert

9mm screw thread caps, septa, and vials are designed especially for use with Aijiren’s and other rotating or robotic are samplers
2ml 12*32mm clear borosilicate glass vial,with a write-in patch; high quality polypropylene caps, ptfe / silicone septa can be pre-slit to easy needle penetration

With its 9mm screw thread design and capacity of 1.5mL, this vial makes for easy handling and integration into autosamplers. Ideal for applications requiring limited quantities. The vial comes equipped with various finishes and closure options, such as screw caps and snap caps, so researchers can select their ideal choice according to their unique research needs.

Suit for: 9mm Short Thread Vials
Caps Material: polypropylene
Cap Diameter: 9mm
Cap Features: 6mm Centre Hole or Closed Top
Septa Material: PTFE / Silicone
Septa Feature: Pre-slit I or X
Septa diameter: 9mm
Septa Thickness: 1mm

Aijiren understands that 2ml HPLC vial are as important as chromatography columns or instruments. As a result, Aijiren 2ml HPLC sample vial are designed to meet the highest standards you can expect. So 2ml HPLC vial can be exported to 32 countries.

These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative 9mm closures and 9mm screw top vials for consistent productivity on every separation.
Standard opening screw-thread vials are manufactured from borosilicate glass and have a maximum fill volume of 2 ml.