9-425 Screw Cap 2ml HPLCPTFE/Silicone/Rubber Vial Screw vial for chromatography

9mm screw thread caps, septa, and vials are designed especially for use with Aijiren’s and other rotating or robotic are samplers
2ml 12*32mm clear borosilicate glass vial,with a write-in patch; high quality polypropylene caps, ptfe / silicone septa can be pre-slit to easy needle penetration

Vial Closure Size: 9mm
Vial Volume (Metric) 1.5mL
Volume (Metric) Working 1.3mL
Material: Glass
Color: Amber
Height (Metric) 32mm
Outside Diameter (Metric) 12mm
Residual Volume: <4μL

1.5ml/2mlSnap autosampler borosilicate glass vial refers to a type of vial commonly used in laboratory settings for sample storage and analysis.
Borosilicate glass is chosen for its excellent resistance to thermal shock, chemical durability, and low contamination potential.
The term “Snap autosampler” typically refers to an automated instrument used in analytical chemistry, specifically in chromatography.
It is designed to automatically inject samples into the chromatographic system for analysis.
The vials used with such autosamplers need to be compatible with the instrument’s design and specifications.

The crimp type vial, bottom diameter is 11.6mm, the height is 32mm, the neck diameter is 11mm. Actual capacity 2mL, standard capacity 1.5mL

1.5/2ml autosampler vial refers to a type of sample container commonly used in analytical chemistry and laboratory settings.
The vial has a total volume capacity of 1.5 to 2 milliliters (ml).
Autosampler vials are designed to be compatible with automated liquid handling systems, such as autosamplers, which are used to inject samples into analytical instruments for analysis.
The vial typically consists of a cylindrical glass or plastic body with a narrow opening at the top.
It is sealed with a cap or septum to prevent sample contamination and evaporation.

Capacity: 1.5/2ml
Temperature: -60—200℃
Material: bottle (domestic borosilicate); gasket (Teflon/silicone); lid (polypropylene)
Color: bottle (transparent/amber), cap (blue)

Features: 32*11.6mm vial; 11*1mm Teflon/silicone septa; 11mm white open PP cover. It can be used on various autosamplers.

2ml snap autosampler vial is mainly used in lab chromatography analysis. This 2ml snap top autosampler vial has some features: 1.Extremely high inertness: The inertness of the sample vial can reduce the peak variability of the analyte. 2. Consistent performance: Each batch of the sample vial has consistent performance, which saves you more time for troubleshooting and re-running samples. You can also cooperate with Micro-insert when the sample margin is small.

Aijiren 13-425 glass vials with screw cap are customized products based on your experimental requirements for vial types, writing areas, logos and other individual parameters. Aijiren 13-425 glass vials with screw cap is fully compatible with SHIMADZU autosamplers. Compared to crimp top vials, 13-425 glass vial with screw cap can easily tighten the lid without the help of a tool. Polypropylene threaded cap with PTFE septa, can form a good seal on the vial, improve work efficiency.

The 2ml Snap Vial provided by Aijiren is suitable for use on Waters Autosampler. The bayonet design of Snap makes the operation of capping Vial very convenient. Aijiren’s Snap Top Vial Cap is made of high-quality PP plastic, and can be customized in a variety of colors to meet customer needs.

Aijiren 9-425 HPLC Vial can choose the type with writing area and scale for easy filling and identification of samples. Aijiren 9-425 sample vials can be used with the robotic arm autosampler. The opening of the 9mm sample vial is 40% larger than that of ordinary vials to facilitate sample preparation. The Aijiren 9-425 sample vial must be used together with the 9mm screw pp bottle cap. Ensure proper fit and function.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

2ml 9mm sample vial with screw cap is easy to seal. You can seal the screw cap, easily, without any tools. 2ml 9mm sample vial with screw cap’s size is 22.5x46mm. Choose the 2ml sample vial with cap for your PERKIN ELMER autosampler.

The 9mm screw neck vial is the 9mm screw neck vial, which has the highest sales volume among Aijiren’s HPLC vials, because it can be used with most autosamplers on the market. In addition, the 9mm screw neck vial has a wide mouth and is convenient for automatic injection. Needle for pulling samples.

Snap Vials are manufactured from Type 1 borosilicate glass(Class A, 33 expansion borosilicate glass), available in clear or amber, or from Polypropylene. Snap Vials accept both an Aluminum Snap Seal as well as a Polyethylene Snap Cap. Excellent for short term storage. Deactivation, MS Certification is also available.

Aijiren has been producing 2ml glass autosampler vial since 2009. The glass vials we produce are widely used all over the world. For more than ten years, our customers are in more than 70 countries and regions. Our 2mlvial is also well received by customers. Aijiren’s customer service and product quality are among the best in laboratory consumables.

2 ml clear crimp neck vial is a type of vial commonly used in laboratory settings for storing and handling liquid samples or reagents.Clean the vials thoroughly before use to avoid contamination, and use a crimping tool to apply the cap or closure securely.

In the field of experimental consumables, glassware consumables account for 86%. Reagent bottles are widely used for reagent storage and transport, accounting for only 32% of the final glassware. 2ml HPLC vials are widely used in chromatography, accounting for 54% of glassware consumables. This shows that the demand for the 2ml HPLC vial market is very large.

Material: Borosilicate glass
Finish Type: Screw Neck
Color: Clear / amber
Size: 11.6*32mm
Cap: Black Polypropylene Cap
Closed-top or with 5.5mm center hole
PTFE/silicone Septa
with pre-slit

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

Aijiren is committed to ensuring the safety and integrity of the analyzed samples. Aijiren provides an innovative 10mm 2ml Hplc screw Vials to ensure that all experimental data during the separation process are consistent. 10-425 Screw Vials are the best choice for the latest autosamplers. The standard opening vial is made of borosilicate glass and has a maximum filling volume of 2ml.

1.5ml autosampler GC vial is a type of vial specifically designed for automatic sample injection in gas chromatography (GC) systems. These vials are typically made of glass or plastic and are used to contain liquid or solid samples that will be analyzed using a gas chromatograph.
Autosampler vials are designed to be compatible with automatic sample handling systems, allowing for efficient and precise sample introduction into the GC instrument.

9-425 short thread vials with screw caps wholesale, the best supplier in China
Aijiren provides chromatography vials, caps, vial inserts, syringe filters for hplc, glass reagent bottles, etc
Suitable for most autosampler use in the market

Aijiren 2ml 11mm Snap Ring HPLC Vial is made of transparent type A type 1 or amber type B type 1 type B borosilicate glass. Amber glass can effectively block ultraviolet rays and protect sensitive samples from the volatilization caused by ultraviolet rays. Aijiren 2ml 11mm Snap Ring HPLC Vial has a standard scale and writing area for easy filling and identification.

2ml crimp hplc vials vary depending on the filling volume. Distinguish between a standard 2ml crimp hplc vial and a micro vial with a shape that reduces the volume or outer volume. Alternatively, of course, you can use inserts to reduce the capacity in the vial and create ideal conditions for removing samples.

The 2ml crimp hplc vial with insert is larger than the 9mm screw sample vial and has a wider mouth. The 2ml crimp hplc vial features an opening about 40% wider than the standard opening vial. Large openings reduce the risk of autosampler needle bending during sampling.

2ml screw HPLC borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample containment. These vials are specifically designed to meet the requirements of HPLC analysis and are made from borosilicate glass.
Borosilicate glass is chosen for its excellent properties that make it suitable for HPLC applications. It has high resistance to thermal shock, meaning it can withstand rapid changes in temperature without breaking.
This is important in HPLC, where samples are often subjected to heating and cooling cycles during the analytical process.

1.5ml 9mm Screw Neck Vial for automatic samplers is made of low metal type 33 and 51 COE borate glass to prevent sample instability or leaching. By selecting the cap and pad, we provide the best sealing solution for the sample.

2ml amber snap autosampler vial is equipped with PP snap cap. Snap cap can be easy to take away. 2ml amber snap autosampler vial can be matched with various color of caps. 2ml amber snap autosampler vial caps bring more convenience to your inventory management.
2ml amber snap autosampler vial for lab chromatography analysis is also equipped with PTFE/Silicone Septa. This 2ml amber snap vial septa can total seal the vial. Aijiren has continued to improve septa to actively reduce leaching, chipping, blocking, pushing, stiffening, and adsorption issues.

2ml screw cap borosilicate glass vial with closure is a type of laboratory container commonly used for the storage, transport, and handling of liquid or solid samples. It consists of a borosilicate glass vial and a screw cap closure that provides a secure seal. When using screw cap borosilicate glass vials with closures, it is important to handle them carefully to avoid breakage or damage. Proper labeling and documentation should be applied to ensure accurate sample identification and traceability.