9-425 2ml Screw HPLC Vial with Logo

These vials are a good choice for the latest autosamplers. With an emphasis on improving sample security and integrity, we offer innovative 9mm closures and 9mm screw top vials for consistent productivity across all separations.
Standard opening screwed viars are manufactured from borosicate glass and the maximum filling volume is 2 ml.

9mm screw thread caps, septa, and vials are designed especially for use with Aijiren’s and other rotating or robotic are samplers
2ml 12*32mm clear borosilicate glass vial,with a write-in patch; high quality polypropylene caps, ptfe / silicone septa can be pre-slit to easy needle penetration

The Autosampler Vial produced by Aijiren is often used in autosamplers. Whether it is Aijiren or other brands of autosamplers, Aijiren Autosampler Vial can be perfectly adapted. It is precisely because of this that Aijiren Autosampler Vial can be so well-known and become A well-known manufacturer of chromatography consumables in the world.

Suit for: 9mm Short Thread Vials
Caps Material: polypropylene
Cap Diameter: 9mm
Cap Features: 6mm Centre Hole or Closed Top
Septa Material: PTFE / Silicone
Septa Feature: Pre-slit I or X
Septa diameter: 9mm
Septa Thickness: 1mm

9mm screw autosampler vial is widely used in laboratory chromatographyanalysis. Aijiren as one of largest chromatography consumable supplier, supplies 9mm screw HPLC vial in wholesale price. This 9mm screw vial package can reduce screw vial mouth touch to prevent contamination of sample. At the same time, the package box can be used as a vial rock, it is save the cost. Welcome to inquiry us about chromatography consumable.

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

The 9mm screw cap is made from high-quality material, providing excellent durability and chemical resistance. Its precise threading allows for easy and efficient sealing, ensuring a reliable closure for HPLC vials. The septa, made of a specialized material, offers optimal inertness and compatibility with a wide range of samples, ensuring accurate and reproducible results in HPLC analysis.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections.

Aijiren focus on improving the safety and integrity of our samples. Aijiren provide innovative 9mm thread caps and 9mm 2ml Hplc Screw Vials to ensure consistent productivity in all separation processes. These vials are the best choice for the latest autosampler. Standard open screw vials are made of borosilicate glass with a maximum filling volume of 2ml.

Caps with solid PE liners offer good chemical resistance and low moisture vapor transmission rate and is great for nail polish remover and higher concentration acids & alkalis. Good for non-oil products filled at room temperature. Because this lining system is paperless, your samples will not be contaminated with fiber or paper particles from the closure. Available in Phenolic caps.

The PP cap will puncture with far less force than needed to puncture a PTFE/Silicone septa, thus minimizing instrument wear and tear as well as downtime. The septa are not resealable and are intended for single use.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials.

The non-pre-slit septas help to reduce carryover from vial to vial because the resealing characteristics of the septum act as a squeegee to wipe solution from the outside of the needle. Typically, a non-slit septum exhibits resealing capabilities for a limited number of needle punctures but for long-term storage in the vial, using a new non-punctured septum is best practice.

9mm Closures are formed by the combination of Cap and Septa. Screw Neck guarantees the tightness of 9mm Closures. Generally speaking, one end of PTFE faces the sample surface, because PTFE is highly inert and difficult to react with chemicals. Aijiren also supports separate orders for Cap and Septa.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

The aijiren chromatography sample vial is made of borosilicate glass and meets ASTM TYPE I ClassA and USP TYPE I standards.
There are four types: colorless and amber vial, handwriting area and no handwriting area.

Our vial comes with a variety of septa options to suit your specific application needs. Whether you require septa with different materials, thicknesses, or properties, our Autosampler HPLC Vial provides versatility and customization. Select the ideal septa option to ensure optimal sample protection and compatibility with your analysis requirements.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

The China 0.3ml, 9mm, Clear or Amber, Polypropylene Micro Vial is available in disposable and sterile options, catering to different laboratory needs. The disposable vials offer convenience and eliminate the need for cleaning or sterilization, saving valuable time and resources. The sterile vials are pre-sterilized, ensuring contamination-free sample storage and reducing the risk of experimental errors or cross-contamination.

Material: Brosilicate Glass/1st hydrolytic class glass
Volume: 1.5-2.0ml
Dimension: 11.6x32mm
Neck: 9mm Screw neck
Color: Amber and Clear
Septa: Pre-Slit, PTFE/Silicone
OEM & ODM Custom Service

If the weight, damage, surface inertness, and/or disposal costs of the glass vial are concerned, the vial manufactured from polypropylene is an alternative to consideration. The benefits of polypropylene materials include low extraction rates, compatibility with many solvents, ideal for working with proteins, ideal for ion chromatography applications, ideal for pH-sensitive sample storage, and eliminate the need for inserts during microsampling.

The 0.3ml PP Clear or Amber Micro Vial with a 9mm Screw Neck is a versatile and compact solution for laboratory sample storage and analysis. These micro vials are made of high-quality polypropylene (PP) material, ensuring excellent chemical resistance and sample protection. Available in clear or amber options, they offer visibility and light protection for different sample types.

Short Thread Caps with Septa for 9mm 1.5ml HPLC Vial often come with multiple septa options to accommodate different analytical requirements. Depending on the specific application, researchers can choose from various septa materials, such as silicone, PTFE, or bonded septa, to optimize sample compatibility and performance.

High recovery Vials are manufactured from heavy wall, low extractable, borosilicate glass providing excellent chemical resistance and durability during packaging and transportation.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.