9-425 2ml Clear/Amber Hplc borosilicate glass Vial for waters

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

2ml snap autosampler vial is equipped with PP snap cap. Snap cap can be easy to take away. 2ml snap autosampler vial can be matched with various color of caps. 2ml snap autosampler vial caps bring more convenience to your inventory management. 2ml snap autosampler vial for lab chromatography analysis is also equipped with PTFE/Silicone Septa. This 2ml snap vial septa can total seal the vial. Aijiren has continued to improve septa to actively reduce leaching, chipping, blocking, pushing, stiffening, and adsorption issues.

Let me introduce the material of 8-425 2ml autosampler vials, 33 Expansion borosilicate glass USP Type I Class A made of clear vial, or 51 Expansion borosilicate glass USP Type I, Class B made of Amber vial.Our glass uses neutral borosilicate and low borosilicate, but our neutral borosilicate can reach the standard of high borosilicate, and our low borosilicate can reach the standard of neutral borosilicate. We use excellent raw materials to make 8-425 2ml autosampler vials.

Aijiren has been producing 8-425 2ml hplc glass vial for more than ten years. During this decade, Aijiren added new factories and production lines to strictly regulate production standards and processes. Continuous improvement has made Aijiren one of the largest laboratory consumable suppliers in southern China.

Capacity: 1.5/2ml
Temperature: -60—200℃
Material: bottle (domestic borosilicate); gasket (Teflon/silicone); lid (polypropylene)
Color: bottle (transparent/amber), cap (blue)

Autosampler Vials for GC and HPLC are typically grouped according to the diameter of the vial, the height of the vial, and the thread finish. Both clear glass and amber glass are highly inert. Amber glass protects sensitive natural samples by avoiding exposure to UV rays. Vials are mainly used to inject samples from autosamplers. 2mL 8-425 vials are more commonly used, but are sold in multiple sizes. The autosampler needle penetrates the cap during injection and extracts the required sample fraction from the vial. Aijiren is proud to offer numerous vials for chromatography applications.

Aijiren’s Snap Vial is commonly used in HPLC analysis and is popular because of its convenient sealing. The glass of Aijiren snap vial is borosilicate hydrochloric acid glass that can hold samples and is not easy to change. The Cap of Snap Vial is Pe Cap, which is soft and easy to handle.

1.5ml/2mlSnap autosampler borosilicate glass vial refers to a type of vial commonly used in laboratory settings for sample storage and analysis.
Borosilicate glass is chosen for its excellent resistance to thermal shock, chemical durability, and low contamination potential.
The term “Snap autosampler” typically refers to an automated instrument used in analytical chemistry, specifically in chromatography.
It is designed to automatically inject samples into the chromatographic system for analysis.
The vials used with such autosamplers need to be compatible with the instrument’s design and specifications.

9-425 Screw Cap 2ml HPLC vial is a type of vial commonly used in High Performance Liquid Chromatography (HPLC) applications. It is designed to hold samples for analysis in HPLC systems.The vial has a capacity of 2ml, which refers to the maximum volume of liquid it can hold. The 9-425 designation indicates the thread size and type of the screw cap, which is compatible with specific autosampler systems.These vials are widely used in chromatography laboratories for the storage and analysis of liquid samples in HPLC systems.

The 9mm screw neck vial is the 9mm screw neck vial, which has the highest sales volume among Aijiren’s HPLC vials, because it can be used with most autosamplers on the market. In addition, the 9mm screw neck vial has a wide mouth and is convenient for automatic injection. Needle for pulling samples.

9-425 short thread vials with screw caps wholesale, the best supplier in China
Aijiren provides chromatography vials, caps, vial inserts, syringe filters for hplc, glass reagent bottles, etc
Suitable for most autosampler use in the market

Padded 2ml snap top Autosampler vials are widely used in experiments. The pads are made from PTFE and high quality silicone rubber or ultra-high purity silicone as raw materials. Make sure the gasket is non-toxic. Using an adhesive-free adhesive process, PTFE film and silicone rubber or silicone adhere and maintain a composite post-interval Teflon layer contact reagent with good properties, good chemical inertity of the two materials.

• Widely used in HPLC applications, universally usable vials for almost autosamplers, include the one with robotic handing.
• Snap vials can be closed with either snap caps or crimp caps.
• Snap caps can be easy as push-on, pull-off by hand.
• Clear glass vials–made from USP Type I, Class A, 33Borosilicate Expansion glass
• Amber glass vials—made from USP Type 1 Class B, 51Borosilicate Glass.

Aijiren’s 2ml Glass Vials can be applied in a wide range of fields. Many projects that require chromatographic analysis need to use 2ml Glass Vials, such as environmental analysis, soil analysis, pharmaceutical analysis, food analysis, etc. The aim of Aijiren is to provide high-quality chromatographic consumables for customers of chromatography.

Aijiren understands that 2ml HPLC vial are as important as chromatography columns or instruments. As a result, Aijiren 2ml HPLC sample vial are designed to meet the highest standards you can expect. So 2ml HPLC vial can be exported to 32 countries.

The function of crimping top sample vials, Strict quality assurance provides dimensional consistency between batches, Optional ceramic write points with filling marks, Certified and fully compatible with autosampler.

11mm Gc Snap Top Caps With Ptfe Silicone Septa For 2ml Snap Vials , Find Complete Details about 11mm Gc Snap Top Caps With Ptfe Silicone Septa For 2ml Snap Vials,Auto Sampler Vial,Hplc Vial,Snap Vial from Supplier or Manufacturer-Jiangyin Allpro Polymer Technology Co., Ltd.

10-425 Wide-opening vials provide an increased target area for easier sample preparation and to reduce the chance of bent or broken needles during sampling,10-425 Vials are manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B borosilicate glass.

2ml crimp top vial from Aijiren is made of high-quality borosilicate hydrochloric acid glass, which can effectively prevent chemical substances from reacting with Vial to affect the results of the experiment. The glass of Vial has two colors, Clear and Amber, and customers can put it according to the claim The characteristics of the samples are selected.

1.5ml/2ml 8-425 autosampler vial (Shimadzu chromatography sample vial) is provided by Zhejiang Aijiren Rechnology Co., Ltd., instead of imported Shimadzu sample bottle, standard GC, HPLC sample bottle, 5MM caliber, 8-425 standard Threaded port can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum. The bottle cap is made of high-quality polypropylene, and the septum is manufactured with high-quality materials to ensure the efficiency of the function.
Applicable to: Beckman, Diane, Finnigen, Gilson, LKB, Thermoelectric Thermo, Varian Varian, Shimadzu and other autosamplers.

Suit for: 9mm Short Thread Vials
Caps Material: polypropylene
Cap Diameter: 9mm
Cap Features: 6mm Centre Hole or Closed Top
Septa Material: PTFE / Silicone
Septa Feature: Pre-slit I or X
Septa diameter: 9mm
Septa Thickness: 1mm

The sample vial and caps have strict size standards and can be matched with various models of autosamplers such as Aijiren, Waters, Varian, and Shimadzu.

2ml Amber Snap Autosampler Vial is mainly used in lab chromatography analysis. This 2ml Amber Snap Autosampler Vial has some features: 1.Extremely high inertness: The inertness of the sample vial can reduce the peak variability of the analyte. 2. Consistent performance: Each batch of the sample vial has consistent performance, which saves you more time for troubleshooting and re-running samples.

1.5ml/2ml Screw neck HPLC clear vials are a type of vial used in high-performance liquid chromatography (HPLC) applications.
HPLC clear vials are made from clear glass, typically borosilicate glass, which offers excellent visibility and chemical resistance.
The clear glass allows for easy visual inspection of the sample and facilitates accurate volume measurements.
These vials are specifically designed to meet the requirements of HPLC applications, which often involve sensitive and precise analyses.
Screw neck HPLC clear vials are a type of vial used in high-performance liquid chromatography (HPLC) applications.

9mm thread screw neck vial, 32×11.6mm, transparent / amber PP, with graduation line, slightly concave shaped bottom
Preassembled cap and septafor 9mm thread screw PP cap, blue, centrel hole, PTFE/Silicone 9x1mm

Aijiren’s Snap Top Vial is suitable for most Autosamplers on the market, especially Waters’ Autosampler. If you are using Waters’ autosampler, you can consider purchasing Aijiren’s Snap Top Vial for use. The Cap of Snap Top Vial has a center hole to facilitate the automatic injection needle to take samples.

Aijiren 9-425 HPLC Vial can choose the type with writing area and scale for easy filling and identification of samples. Aijiren 9-425 sample vials can be used with the robotic arm autosampler. The opening of the 9mm sample vial is 40% larger than that of ordinary vials to facilitate sample preparation. The Aijiren 9-425 sample vial must be used together with the 9mm screw pp bottle cap. Ensure proper fit and function.

HPLC vials are specially designed containers used to hold samples for injection into an HPLC instrument for analysis. These vials are made of high-quality materials such as borosilicate glass or plastic that are chemically inert and have minimal interaction with the sample.
HPLC vials are specially designed containers used to hold samples for injection into an HPLC instrument for analysis. These vials are made of high-quality materials such as borosilicate glass or plastic that are chemically inert and have minimal interaction with the sample.