9-425 2 ml Screw cap Borosilicate Glass Vial with closure

Use Aijiren 11 mm Glass Crimp Top Vials with aluminum crimp seal closures. These high-quality 11 mm glass vials are 2 mL, 12 x 32 mm and fit most brands of autosamplers. Made of superior quality 33 expansion borosilicate clear (Type 1, Class A), they meet all requirements of US, EU, JPN Pharmacopia. Choose from Aijiren brands.

The function of crimping top sample vials, Strict quality assurance provides dimensional consistency between batches, Optional ceramic write points with filling marks, Certified and fully compatible with autosampler.

Although most laboratories have switched to 9 mm screw thread vials for a wider opening while still being autosampler compatible, some labs use 8-425 vials for storing solvents. The standard opening 8-425 vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.

Aijiren’s Snap Top 2ml HPLC Vials for autosampler are constructed from type 33 and type 51 COE borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching.
By choosing Aijiren caps and septa, you provide your sample with a the best containment solution available.

The crimp type vial, bottom diameter is 11.6mm, the height is 32mm, the neck diameter is 11mm. Actual capacity 2mL, standard capacity 1.5mL

HPLC (High-Performance Liquid Chromatography) chromatography vials are specialized containers designed for use in HPLC analysis. These vials are made from inert materials that do not interact with the sample or the mobile phase, ensuring accurate and reproducible results.When selecting HPLC chromatography vials, it is important to consider factors such as the sample type, analysis requirements, and the specific HPLC system being used.

Aijiren is a supplier of Autosampler Vial. Aijiren has been in this industry for more than 10 years. Aijiren’s Vials are of good quality and affordable. And it is suitable for Autosampler of Waters. It can bring a lot of help to the daily experiment of the laboratory.

2ml Snap Top HPLC Vial is made of Type 1 borosilicate glass. Comparing with 9mm screw vial, this 2ml Snap Top HPLC Vial mouth is wider opening. So 2ml Snap Top HPLC Vial is easier to fill and provides a larger target area for the autosampler needle. That means, the 2ml Snap Top HPLC Vial can protect the needle.

Aijiren understands that 2ml HPLC vial are as important as chromatography columns or instruments. As a result, Aijiren 2ml HPLC sample vial are designed to meet the highest standards you can expect. So 2ml HPLC vial can be exported to 32 countries.

2 ml borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample storage and analysis.Borosilicate glass is preferred in HPLC because it offers excellent chemical resistance and thermal stability, making it suitable for handling a wide range of solvents and temperature conditions.When working with water samples in HPLC, borosilicate glass vials are a suitable choice due to their resistance to water and other polar solvents.

Some analysis systems use their own processes and components to optimize performance. As a result, fitting the sample vial to the analysis system will completely affect the quality of the expected results. The Aijiren 2ml 9mm HPLC vial has been tested many times and is fully compatible with popular commercially available chromatography analytical instruments.

2ml screw cap borosilicate glass vial with closure is a type of laboratory container commonly used for the storage, transport, and handling of liquid or solid samples. It consists of a borosilicate glass vial and a screw cap closure that provides a secure seal. When using screw cap borosilicate glass vials with closures, it is important to handle them carefully to avoid breakage or damage. Proper labeling and documentation should be applied to ensure accurate sample identification and traceability.

Features: 32*11.6mm vial; 11*1mm Teflon/silicone septa; 11mm white open PP cover. It can be used on various autosamplers.

Aijiren’s 2ml Glass Vials can be applied in a wide range of fields. Many projects that require chromatographic analysis need to use 2ml Glass Vials, such as environmental analysis, soil analysis, pharmaceutical analysis, food analysis, etc. The aim of Aijiren is to provide high-quality chromatographic consumables for customers of chromatography.

Aijiren is committed to ensuring the safety and integrity of the analyzed samples. Aijiren provides an innovative 10mm 2ml Hplc screw Vials to ensure that all experimental data during the separation process are consistent. 10-425 Screw Vials are the best choice for the latest autosamplers. The standard opening vial is made of borosilicate glass and has a maximum filling volume of 2ml.

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Glass vials are available in 2 ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

The non-pre-slit septas help to reduce carryover from vial to vial because the resealing characteristics of the septum act as a squeegee to wipe solution from the outside of the needle. Typically, a non-slit septum exhibits resealing capabilities for a limited number of needle punctures but for long-term storage in the vial, using a new non-punctured septum is best practice.

Aijiren Crimp Top vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, it has a flat bottoming function and compatibility with automatic sampling equipment.

2ml screw autosampler vial refers to a specific type of vial used in laboratories for the storage and analysis of samples. It is designed to be compatible with autosamplers, which are automated instruments used for sample handling and injection into analytical instruments such as gas chromatographs (GC) and liquid chromatographs (LC).
The “2ml” refers to the vial’s nominal volume, which is 2 milliliters. This volume indicates the maximum capacity of the vial. The vial typically has clear glass or sometimes amber glass construction, allowing for visibility of the sample contents. The vial is cylindrical in shape with a screw thread on the outer surface of the neck.

9mm screw HPLC autosampler vial can be transparent or amber (mainly used to avoid light) color. The function of the 9mm screw HPLC autosampler vial is manufactured and packaged in an ultra-clean working environment. Certain packaging materials reduce contamination of delivery progress. 9mm screw HPLC autosampler vials can be applied to various types of HPLC and GC equipment especially for Aijiren.

The crimp vials produced by Aijiren are made of transparent or amber type 1 borosilicate glass or polypropylene. Requires crimper and lid opener. Very suitable for long-term storage. Deactivation and MS authentication can also be used.

2ml lab autosampler vial is a small container typically used in laboratory settings to store and transport samples for analysis.
Autosampler vials are designed to be compatible with automatic sampling systems or instruments known as autosamplers.
The capacity of a 2ml autosampler vial refers to its volume, and it can hold up to 2 milliliters (2 ml) of liquid or sample.
These vials are commonly made of glass or high-quality plastic materials such as polypropylene or polymethylpentene (PMP).
The choice of material depends on the specific application and compatibility requirements.

1.5ml/2ml Screw neck HPLC clear vials are a type of vial used in high-performance liquid chromatography (HPLC) applications.
HPLC clear vials are made from clear glass, typically borosilicate glass, which offers excellent visibility and chemical resistance.
The clear glass allows for easy visual inspection of the sample and facilitates accurate volume measurements.
These vials are specifically designed to meet the requirements of HPLC applications, which often involve sensitive and precise analyses.
Screw neck HPLC clear vials are a type of vial used in high-performance liquid chromatography (HPLC) applications.

2ml UPLC (Ultra-Performance Liquid Chromatography) is a high-pressure liquid chromatography technique used for separating and analyzing chemical compounds. When working with UPLC, it’s important to choose appropriate vials and caps to ensure sample integrity and compatibility with the system.

Too much or too little resistance to the needle can damage the septum, damage the re-sealing, the needle may be clogged by the core ring of the septum material, or the autosampler may be damaged. The Used Aijiren silicone rubber/PTFE septum is designed to give moderate resistance to the autosampler needle during the injection process, so it penetrates correctly into the vial without damaging the septum or injection needle.

Aijiren has been producing 2ml glass autosampler vial since 2009. The glass vials we produce are widely used all over the world. For more than ten years, our customers are in more than 70 countries and regions. Our 2mlvial is also well received by customers. Aijiren’s customer service and product quality are among the best in laboratory consumables.

All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

2ml crimp top vial from Aijiren is made of high-quality borosilicate hydrochloric acid glass, which can effectively prevent chemical substances from reacting with Vial to affect the results of the experiment. The glass of Vial has two colors, Clear and Amber, and customers can put it according to the claim The characteristics of the samples are selected.